High performance proportional actuator – 34 lbf (150 N)
High performance proportional actuators with automatic stroke adaptation which provide accurate modulating, 3-point or on/off control when used together with stand-alone 2-way and 3-way control valves from IMI Hydronic Engineering.
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off which helps to reduce commissioning time and protect the valve and actuator from overloading.
Protected hand drive for a safe manual operation which enables easy troubleshooting.
Ease of service
The actuator housing cover is easy to remove (without screws). Parameters can be easily changed on site without using a Laptop.
For modulating or 3-point control.
24V AC/DC ±10%
Frequency 50-60 Hz ±5%
0(2)-10 VDC, Ri ~20 kΩ. Signal direction and starting point adjustable by micro switches.
End position switch-off:
Max. ambient temperature: 122°F
Min. ambient temperature: 32°F
59.1 in, 22 AWG, with wire end ferrule.
Connection to valve:
Retainer nut M30x1.5 of brass.
Black body and red cover.
TA, Article No, product name and technical specification.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.