Our website uses cookies to better meet your requirements. Proper configuration of browser options allows you to block or remove cookies but can also cause the site to not function properly or even at all. By continuing to use the site, with no change to your browser settings, you agree to the use of cookies.
Learn about our Privacy Policy for cookies and other similar technologies.

TA-Slider 160

Digitally configurable actuators with a wide range of setup options provide extensive flexibility for on-site parameter adaptation. Fully programmable binary input, relay and adjustable maximum stroke of the valve bring new opportunities for advanced hydronic control and balancing.

Product Information

Digitally configurable proportional push actuator – 36/45 lbf (160/200 N)

Digitally configurable actuators with a wide range of setup options provide extensive flexibility for on-site parameter adaptation. Fully programmable binary input, relay and adjustable maximum stroke of the valve bring new opportunities for advanced hydronic control and balancing.

Key features

Convenient, reliable setup

Fully customizable by smartphone via Bluetooth using a TA-Dongle.

Fully configurable

More than 200 setup options allow input and output signals, binary input, relay, characteristics and many other parameters to be configured.

Easy diagnostic

Tracks last 10 errors to quickly find faults in the system.

Quick copy of settings

Identical settings can be quickly copied from TA-Dongle to several TA-Slider actuators.

Technical description

Functions:

Proportional control
Manual override
Stroke detection
Mode, status and position indication
Stroke limitation setting
Valve blockage protection
Valve clogging detection
Error safe position
Diagnostic/Logging
Plus version:
+ 1 binary input, max. 100 Ω, cable max. 32.8 ft or shielded.
+ 1 relay, max. 5A, 30 VDC/250 VAC on resistive load
+ Output signal

Supply voltage:

24 VAC/VDC ±15%.
Frequency 50/60 Hz ±3 Hz.

Power consumption:

Operation: < 1 VA (VAC); < 0.6 W (VDC)
Standby: < 0.5 VA (VAC); < 0.25 W (VDC)

Input signal:

0(2)-10 VDC, Ri 47 kΩ.
Adjustable sensitivity 0.1-0.5 VDC.
0.33 Hz low pass filter.
Proportional:
0-10, 10-0, 2-10, 10-2 VDC
Proportional split-range:
0-5, 5-0, 5-10, 10-5 VDC
0-4.5, 4.5-0, 5.5-10, 10-5.5 VDC
2-6, 6-2, 6-10, 10-6 VDC

Output signal:

Plus version: 0(2)-10 VDC, max. 8 mA, min. 1.25 kΩ.
Ranges: See “Input signal”.

Characteristics:

Linear, EQM 0.25 and inverted EQM 0.25.

Control speed:

254 s/in

Adjusting force:

36/45 lbf

Self-adjusting for IMI Hydronic Engineering valves.

Temperature:

Media temperature: max. 248°F
Operating environment: 32°F – +122°F (5-95%RH, non-condensing)
Storage environment: -4°F – +158°F (5-95%RH, non-condensing)

Ingress protection:

IP54

(all directions)

(according to EN 60529)

Protection class:

(according to EN 61140)

III TA-Slider 160 (SELV)
II TA-Slider 160 Plus (protective insulation)

Cable:

3.28 ft, 6.56 ft or 16.4 ft. With wire end sleeves.
TA-Slider 160: type LiYY, 3x30 AWG (3x0.25 mm2).
TA-Slider 160 Plus: type LiYY, 5x30 AWG (5x0.25 mm2) and type H03VV-F, 3x18 AWG (3x0.75 mm2).
Halogen free as option.

Stroke:

0.25 in

Automatic detection of the valve lift (self-stroking).

Noise level:

Max. 30 dBA

Weight:

0.44 lb

Connection to valve:

Retainer nut M30x1.5.

Material:

Cover: PC/ABS GF8
Housing: PA GF40.
Swivelling nut: Nickel-plated brass.

Color:

White RAL 9016, grey RAL 7047.

Marking:

Label: IMI TA, CE, product name, article No. and technical specification.

Certification:

LV-D. 2014/35/EU: EN 60730-1, -2-14.
EMC-D. 2014/30/EU: EN 60730-1, -2-14.
RoHS-D. 2011/65/EU: EN 50581.

Product standard:

EN 60730.

The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.

Product Articles

Animations & Films

Use our interactive animations to simulate the effects of our innovative product as it would perform in your HVAC system. See our product films and learn more about how our products can help you. Click the play button to get started!

Text for Tenders