Pump ball valve made of gunmetal
Globo P and Globo P-S are used in pump warm water heating systems for direct connection to circulating pumps with screwed pipe connections. Easy to install by pushing the pump union nut onto the form flange of the pump ball valve. Universal application opportunity, e. g. Globo P on the suction side, and Globo P-S with a gravity brake on the pressure side of a circulating pump.
Pump ball valve, specially designed for heating technology requirements.
Body and ball made of corrosion resistant gunmetal.
Available for delivery in two models: Globo P without gravity brake, and Globo P-S with gravity brake.
Gravity brakes which operate at a low noise level, made of plastic, can be opened externally. Identifiable open/closed position.
Detachable operating toggle made of shock-resistant plastic. Hidden toggle stop, therefore no danger of injury.
Thermometer, replaceable through changing the red closing cap in the handle, see accessories.
Maintenance free spindle sealing through two EPDM O-rings. Ball sealing from pure PTFE. Gravity brake sealing through and EPDM O-ring.
Versions with socket female thread connection and formed flange with full load-bearing sealing surface. Connections (socket x flange): 1" x 1", 1 1/4" x 1 1/4" and 1 1/4" x 1".
Versions with Viega and Mapress press connection and formed flange with full load-bearing sealing surface. Connections (press connection x flange): 28 mm x 1", 35 mm x 1 1/4".
Heat insulating shells, consisting of two interlocking semi-shells, see accessories.
Permissible operating temperature TB Globo P -10 °C ˗ 120 °C, with press connection 110 °C, Globo P-S 90 °C.
Permissible operating pressure PB 10 bar (PN 16).
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.