Features & Benefits

    May be installed at an outlet box

    Liquid-filled thermostat with high pressure power and precision control

    Symbols for basic setting and nighttime set back

    Brief data including the most important settings

    Rotation direction indicator

    Technical description

    Applications area:

    Heating systems

    Functions:

    Room temperature control.
    With zero position (valve opens at approx. 0 °C or 32 °F).
    Temperature range is limited on both ends and can be blocked using covered stop clips.

    Control behavior:

    Proportional controller without auxilliary energy. Liquid-filled thermostat. High pressure power, lowest hysteresis, optimal closing time.
    Stable control behavior even in the case of small calculated p-band variation (<1K).

    Nominal temperature range:

    0 °C - 27 °C

    Temperature:

    Max. sensor temperature: 50°C (122°F)

    Specific extension:

    0.22 mm/K,
    Valve stroke limiter

    Water temperature influence:

    0.3 K

    Differential pressure influence:

    0.4 K

    Closing time:

    26 min

    Hysteresis:

    0.4 K

    Material:

    ABS, PA6.6GF30, brass, steel,
    Liquid-filled thermostat.

    Marking:

    Heimeier.
    Setting numbers 1-5.
    Symbols for basic setting and nighttime reduction.
    Brief data including the most important settings.
    Setting indicators on the face of the head.
    Rotation direction indicator.

    Connection:

    Designed to be mounted on all HEIMEIER thermostatic valve bodies and radiators with integrated valves which have an M30x1.5 thermostatic insert.

    Articles

    Remote dial with built-in sensor.

    Thermostatic head F

    Remote dial with built-in sensor.

    Setting range
    Capillary tube length [m]
    EAN
    Article No
    0 °C - 27 °C
    2,00
    (6.56 ft)
    4024052191017
    2802-00.500
    5,00
    (16.4 ft)
    4024052191819
    2805-00.500
    10,00
    (32.81 ft)
    4024052192717
    2810-00.500

    *) The temperature range refer to approximately room temperature.


    The groove on the face of the thermostatic heads K, VK, WK and F serves to take up specially printed "partner clips". E-mail: [email protected]

    Accessories

    Angle connection M30x1,5


    EAN
    Article No
    4024052035724
    7300-00.700

    Adapters for mounting all HEIMEIER thermostatic heads on thermostatic valve bodies from manufacturers listed here.Standard M30x1.5 threaded connection.Refer also "Thermostatic head with direct connection to thermostatic valve bodies from other manufacturers".*) can not be used on radiators with integrated valves

    Connecting to products from other manufacturers

    Adapters for mounting all HEIMEIER thermostatic heads on thermostatic valve bodies from manufacturers listed here.
    Standard M30x1.5 threaded connection.
    Refer also "Thermostatic head with direct connection to thermostatic valve bodies from other manufacturers".

    *) can not be used on radiators with integrated valves

    Manufacturer
    EAN
    Article No
    Danfoss RA (Ø≈20 mm) *)
    4024052297016
    9702-24.700
    Danfoss RAV (Ø≈34 mm)
    4024052300112
    9800-24.700
    Danfoss RAVL(Ø≈26 mm)
    4024052295913
    9700-24.700
    Vaillant (Ø≈30 mm)
    4024052296019
    9700-27.700
    TA (M28x1,5)
    4024052336418
    9701-28.700
    Herz (M28x1,5)
    4024052296316
    9700-30.700
    Markaryd (M28x1,5)
    4024052296514
    9700-41.700
    Comap (M28x1,5)
    4024052296712
    9700-55.700
    Giacomini (Ø≈22,6 mm)
    4024052429714
    9700-33.700
    Oventrop (M30x1,0)
    4024052428519
    9700-10.700
    Ista (M32x1,0)
    4024052511419
    9700-36.700

    Adapters for mounting HEIMEIER thermostatic heads with an M30x1.5 connection on thermostatic inserts for clamping connections.Standard M30x1.5 threaded connection.Exception: The thermostatic head WK is designed only for mounting on thermostatic inserts with an M30x1.5 threaded connection.

    Connection to radiators with integrated valves

    Adapters for mounting HEIMEIER thermostatic heads with an M30x1.5 connection on thermostatic inserts for clamping connections.
    Standard M30x1.5 threaded connection.
    Exception: The thermostatic head WK is designed only for mounting on thermostatic inserts with an M30x1.5 threaded connection.

    EAN
    Article No
    Series 2
    (20 x 1)
    4024052297214
    9703-24.700
    Series 3
    (23,5 x 1,5), since 10/98
    4024052313518
    9704-24.700
    Spare parts

    M30x1,5 for Thermostatic heads - K, DX, D, F

    Locking ring

    M30x1,5 for Thermostatic heads - K, DX, D, F

    EAN
    Article No
    4024052376612
    6000-11.034

    2802-00-500-4c-hi

    Select a format Download

    F-head

    Select a format Download

    Drawings

    2D3D