Dynalux

Connection kit TA-COMPACT-P, vertical, for flow control, incl. pipe piece for heat meter

Pipe threads according to ISO 228.

*) DN refers to TA-COMPACT-P

**) DN 25, ball valve with connection M10x1

q_max = l/h at each setting and fully open valve plug.

Connection kit TA-COMPACT-DP, vertical, for differential pressure control, incl. pipe piece for heat meter

Pipe threads according to ISO 228.

*) DN refers to TA-COMPACT-DP

**) DN 25, ball valve with connection M10x1

S-connection

For connection kit 3. Installation aid for return in manifold boxes.

Manifold boxes

Flush-mounted box, installation depth 110 - 150 mm.
Note the minimum installation depth 125 mm for connection set 5!

Connection kit TA-COMPACT-P, horizontal, for flow control, incl. pipe piece for heat meter

Pipe threads according to ISO 228.

*) DN refers to TA-COMPACT-P

**) DN 25, ball valve with connection M10x1

q_max = l/h at each setting and fully open valve plug.

Connection kit 2 with STAD balancing valve and Globo ball valve, DN 20

including measuring nipple for measuring differential pressure and flow rate.

Kvs = m³/h at a pressure drop of 1 bar and fully open valve.

Connection kit 3 with Zeparo Vent air separator in supply and Zeparo Dirt sludge separator in return, DN 20

Kvs = m³/h at a pressure drop of 1 bar and fully open valve.

Connection kit TA-COMPACT-DP, horizontal, for differential pressure control, incl. pipe piece for heat meter

Pipe threads according to ISO 228.

*) DN refers to TA-COMPACT-DP

**) DN 25, ball valve with connection M10x1

Dynalux underfloor heating circuit manifold

Connection kit 1 with Globo ball valves, DN 20

with red end cap in supply and blue end cap in return.

Kvs = m³/h at a pressure drop of 1 bar and fully open valve.

Connection kit 5, fixed value control station

with high-efficiency pump Grundfos Alpha 2 15 - 60 130, thermostatic valve with contact sensor and electrical pipe contact safety switch 230V, 15A.
Minimum installation depth manifold boxes: 125 mm.

Connection kit 4 with Globo ball valve DN 20, including spacer for heat meter in return

Globo ball valve with connection G1/4 for direct measurement in supply and return.

Kvs = m³/h at a pressure drop of 1 bar and fully open valve.

Thermostat P with analog switch clock

electronic two-point room thermostat for time-dependent control of the room temperature, with analog 7-day automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact.

Replacement filling, draining, flushing and venting device 1/2”

Handwheel

for all HEIMEIER thermostatic valve bodies. With direct connection, white.

Support sleeve

for copper or precision steel pipe with a 1 mm wall thickness.
Brass.

Thermostatic head F

Remote dial with built-in sensor. Liquid filled sensor.
Setting range 0 °C to 27 °C.

Compression fitting

for copper or precision steel pipe according to DIN EN 1057/10305-1/2.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Metal-to-metal joint.
Nickel-plated brass.
With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.

Thermostat P with digital switch clock

electronic two-point room thermostat for time-dependent control of the room temperature, with digital automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact. Menu-driven via four buttons.

Compression fitting

for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Nickel-plated brass.

Length adjustment fitting

For connecting to plastic, copper, precision steel or multi-layer pipes.
For valves with male thread connection G3/4.
Brass nickel-plated.

Replacement thermostatic insert

> 03.2015

Distributor strip

This unit is used for wiring thermostats and electro-thermal actuators. The unit is suitable for underfloor heating and cooling (summer/winter operation). It is possible to switch over between heating and cooling via an external signal. The pump logic enables enery-optimised pump control. For up to 6 zones (rooms). Ready to plug in to a 230 V power socket.

Flow meter

for Dynalux.

Room thermostat

with thermal recirculation, controls the room temperature in connection with thermal actuators.

EMOtec

Two-point thermal actuator for floor heating systems. With position indicator in NC version. Suitable for all Heimeier thermostatic valve bodies. For technical data, please refer to the EMOtec datasheet.

Double connection fitting

For clamping plastic, copper, precision steel or multi-layer pipes.
Brass, nickel-plated.

Compression fitting

for Alu/PEX multi-layer pipe according to DIN 16836.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Nickel-plated brass.

Central unit

Receives the room transmitters radio signals. With 8 or 6 output channels for the connection of the thermal actuators.

Room transmitter

battery-driven electronic Fuzzy controller, including battery.

Double nipple

Both sides for clamping plastic, copper, precision steel or multi-layer pipes.
Brass nickel-plated.

Thermal actuator with auxiliary switch

Max. switching current auxiliary switch: Type 230 V: 5 (1) A; Type 24 V: 3 (1) A.
Stroke: 4 mm.
Connection to valve: HEIMEIER M30x1.5, with enclosed adapter.
Adjusting force: 100 N.
Cable length: 1 m fixed.
Connection cable: 4 x 0,75 mm²

Compression fitting

for copper or precision steel pipe according to DIN EN 1057/10305-1/2 and stainless steel pipe.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Soft sealed, max. 95°C.
Nickel-plated brass.