Théorie hydraulique

Nous fabriquons des produits de qualité qui contribuent à créer des solutions en CVC, mais il nous a fallu plusieurs décennies de recherche et d'innovation pour en arriver là. 

Nous nous y connaissons plutôt bien en hydraulique appliquée au chauffage et à la climatisation. Car après tout, c'est nous qui l'avons inventé ! Vous trouverez ici les bases théoriques de notre métier.​

Découvrez tout ce que vous devez savoir pour optimiser les systèmes CVC

Nous avons élaboré une vaste base de données d'articles techniques et d'informations sur les bases théoriques à l'origine de nos produits et de nos solutions en génie hydraulique que nous sommes heureux de partager avec vous ici. Nous vous invitons à faire un petit tour des lieux, tranquillement. Nous sommes certains que vous y trouverez tout ce que vous avez besoin de savoir pour créer des solutions en CVC optimales, équilibrées et économes en énergie.​ 

The TA Balance Method

The TA Balance Method is a computer program built in the balancing instrument CBIII​​ with the same three main advantages of the Compensated Method plus the possibility for one ...

Optimizing hydronic distributions for energy efficiency

​​​​​We present the technical article, based on the scientific work, written by Jean-Christophe Carette, Director of Hydronic College and Eric Bernadou, Senior Marketing Manager.  ...

Desired indoor climates at the lowest possible energy cost

​​To obtain the desired indoor climate at the lowest possible energy cost three conditions must be fulfilled. 

The Compensated Method

The Compensated Method is a further development of the Proportional Method, with three main advantages. 

Balancing of Domestic Hot Water Systems

​​​​​In domestic hot water distribution, temperature of water in the pipes drops significantly when consumption is low or zero. As a result, people get disappointed to wait so l...

Dividing a hydronic system in modules

In theory, it is sufficient with one balancing valve per terminal unit to create the correct repartition of flows in the distribution system. But this requires that the preset value ...

Balancing of typical systems

Balancing of hydronic plants requires some specific conditions that will be analysed bases on some examples.

Balancing Protocol

The aim of balancing is to apply adjustment of flow rates to achieve design requirements

Flows must be compatible at system interfaces

Well-designed HVAC plants deliver comfortable and efficient indoor climates at minimal operating costs

Hydronic balancing & stabilisation of the differential pressures​

The main objective of heating and air conditioning plant design is to obtain a comfortable indoor climate, at minimal energy costs and without operational problems.

Solutions for the balancing and control of small terminal units

At IMI Hydronic Engineering, we believe in always using the right tool for the job. That is why we provide several solutions for balancing and control of small terminal units.