TA-MC15 (TA-MC15-C replaced by TA-TRI)
High performance proportional actuator – 150 N
High performance proportional actuators with automatic stroke adaptation which provide accurate modulating or 3-point control when used together with 2-way and 3-way control valves from IMI Hydronic Engineering.
Features & Benefits
Easy commissioning
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off helps to reduce commissioning time and protect the valve and actuator from overloading.
Easy troubleshooting
Protected hand drive for a safe manual operation which enables easy troubleshooting.
Ease of service
The actuator housing cover is easy to remove. Parameters can easily be changed on site.
Technical Information
Functions:
Modulating or 3-point control.
Supply voltage:
24 VAC/VDC ±10%
Frequency 50-60 Hz ±5%
Power consumption:
Idle/Standby: 0.7 VA (AC); 0.3 W (DC)
Dimensioning: 3.7 VA (AC); 1.7 W (DC)
Nominal: 2.3 VA (AC); 1.1 W (DC)
Input signal:
0(2)-10 VDC, Ri ~20 kΩ.
Signal direction and starting point adjustable by micro switches.
3-point control.
Control speed:
22 s/mm
Adjusting force:
150 N
Operation mode:
S1 100%ED
End position switch-off:
Load-dependent
Temperature:
Media temperature: max. 120°C
Operating environment: 0°C – +50°C (5-85%RH, non-condensing)
Storage environment: -20°C – +60°C (5-85%RH, non-condensing)
Ingress protection:
IP40
Protection class:
III (according to EN 60730)
Stroke:
Max. 9 mm
Automatic detection of the valve lift (stroke detection).
Cable:
0.5 mm2, 1.5 m with wire end sleeve.
Connection to valve:
Swivelling nut M30x1.5 of brass.
Colour:
Black body and red cover.
Marking:
IMI TA, CE, Article No, product name and technical specification.
Weight:
0,25 kg
Articles
TA-MC15
Supply voltage | Input signal | Adjusting force [N] | Stroke max. [mm] | EAN | Article No |
24 VAC/VDC | 3-point, 0(2)-10 V | 150 | 9 | 5902276889714 | 61 015-001 |
