TA-Modulator – NPT threads/ANSI flanges

Pressure independent balancing and control valve for modulating control

The new uniquely shaped EQM characteristics provide highly precise temperature control. The valve is compatible with linear, proportional or 3-point actuators. A built-in differential pressure controller provides high control authority, control stability and automatic limitation of design flow. Measurement of flow and available pressure enables system optimisation and diagnostics.

Features & Benefits

Precise temperature control

Provide uniquely shaped EQM characteristic for best modulating control.

Precise control

Uniquely shaped EQM characteristic provides an up to 6 times larger operating stroke than linear valves.

Quick hydronic balancing

Automatic flow limitation when actuator is fully open protects entire system against overflows.

Easy troubleshooting

Flow and differential pressure measuring helps to reduce pump consumption and provides all necessary data for system diagnostics.

Technical Information

Technical description

Application:

Heating and cooling systems.

Functions:

Control EQM: DN 15-150 normal flow
Control LIN: DN 65-150 high flow
Pre-setting (max. flow)
Differential pressure control
Measuring (ΔH, t, q)
Isolation (for use during system maintenance – see "Leakage rate")

Dimensions:

DN 15-150

Pressure class:

DN 15-50: PN 16
DN 65-150: Class 150

Differential pressure (ΔpV):

Max. differential pressure (ΔpVmax):
DN 15-32: 600 kPa = 6 bar
DN 15-25: 400 kPa = 4 bar*
DN 40-50: 400 kPa = 4 bar
DN 65-150: 800 kPa = 8 bar
Min. differential pressure (ΔpVmin):
DN 15-20: 15 kPa = 0.15 bar
DN 25-32: 23 kPa = 0.23 bar
DN 40-150: 30 kPa = 0.30 bar
DN 65-80 HF: 45 kPa = 0.45 bar
DN 100-125 HF: 55 kPa = 0.55 bar
DN 150 HF: 60 kPa = 0.60 bar
(Valid for maximum setting, fully open. Other settings will require lower differential pressure, check with the software HySelect.)

ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.

ΔpVmin = The minimum recommended pressure drop over the valve, for proper differential pressure control.

*) With Δp insert in PPS.

Flow range:

The flow (qmax) can be set within the range:

DN 15: 92 - 480 l/h
DN 20: 200 - 975 l/h
DN 25: 340 - 1750 l/h
DN 32: 720 - 3600 l/h
DN 40: 1000 - 6500 l/h
DN 50: 2150 - 11200 l/h
DN 65: 4150 - 24100 l/h
DN 65 HF: 7460 - 36500 l/h
DN 80: 5850 - 37300 l/h
DN 80 HF: 9520 - 49000 l/h
DN 100: 11700 - 51700 l/h
DN 100 HF: 18000 - 75900 l/h
DN 125: 15000 - 77300 l/h
DN 125 HF: 23300 - 127000 l/h
DN 150: 26100 - 126000 l/h
DN 150 HF: 38800 - 190000 l/h

qmax = l/h at each setting and fully open valve plug.

Temperature:

DN 15-32:
Max. working temperature: 120°C
Min. working temperature: -20°C
DN 15-25 with Δp insert in PPS, DN 40-50:
Max. working temperature: 90°C
Min. working temperature: -10°C
DN 65-150:
Max. working temperature: 120°C
Min. working temperature: -10°C

Media:

Water or neutral fluids, water-glycol mixtures (0-57%).

Lift:

DN 15-20: 4 mm
DN 25-32: 6,5 mm
DN 40-50: 15 mm
DN 65-125: 20 mm
DN 150: 30 mm

Rangeability:

DN 15-32: >75
DN 40-80: >125
DN 100-150: >150
DN 100-150 HF: >125

Leakage rate:

Leakage flow ≤ 0.01% of max. qmax (max. setting) and correct flow direction. (Class IV according to EN 60534-4).

Characteristics:

Independent shaped EQM.
DN 65-150 HF: Linear.

Material:

DN 15-32:
Valve body: AMETAL®
Valve insert: AMETAL® and PPS
Valve plug: Brass CW724R (CuZn21Si3P)
Spindle: Stainless steel
Spindle seal: EPDM O-ring
Δp insert: PPS and AMETAL® or PPS
Membrane: EPDM
Springs: Stainless steel
O-rings: EPDM
DN 40-50:
Valve body: AMETAL®
Valve insert: AMETAL®
Valve plug: AMETAL® and PTFE
Spindle: Stainless steel
Spindle seal: EPDM O-ring
Δp insert: PPS
Membrane: EPDM
Springs: Stainless steel
O-rings: EPDM
DN 65-150:
Valve body: Ductile iron EN-GJS-400-15
Valve insert: Ductile iron EN-GJS-400-15 and brass
Valve plug: Stainless steel and EPDM O-ring
Valve seat: Stainless steel
Spindle: Stainless steel
Spindle seal: EPDM
Δp insert: Ductile iron EN-GJS-400-15, stainless steel and brass.
Membrane: Reinforced EPDM
Springs: Stainless steel
O-rings: EPDM

AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

Surface treatment:

DN 15-50: Non treated
DN 65-150: Electrophoretic painting

Marking:

Black identification ring on measuring point: TA-Modulator and DN.
DN 15-32: TA, IMI, PN, DN and flow direction arrow. Grey setting wheel.
DN 40-50: IMI TA, PN, DN, inch size, country of origin and flow direction arrow. Orange setting wheel.
DN 65-150: IMI TA, DN, inch size, material and flow direction arrow. Label with technical specification, country of origin and CE. Orange setting wheel.

Connection:

DN 15-50: Male thread according to ISO 228. Connections (accessories) with female and male thread NPT according to ANSI/ASME B1.20.1-1983, or for soldering according to ASME/ANSI B16.18.
DN 65-150: Flanges according to ASME 7 ANSI B16.42 Class 150.

Connection to actuator:

DN 15-32: M30x1.5, push
DN 40-50: M30x1.5, push/pull
DN 65-150: 2xM8, push/pull

Actuators:

DN 15-20:
TA-Slider 160, EMO TM, EMO 3.
DN 25-32:
TA-Slider 160, TA-MC50-C*.
DN 40-50:
TA-Slider 500, TA-Slider 750*.
DN 65-125:
TA-Slider 750.
DN 100-125 HF:
TA-Slider 750 ΔpV ≤ 4 bar, TA-Slider 1250 ΔpV ≤ 8 bar.
DN 150/DN 150 HF:
TA-MC160**, TA-MC253 SE* (fail-safe).

TA-Slider 160, 500, 750 and 1250 also available with fail-safe function.

*) Adapter to be ordered separately, see "Adapters for actuators".
**) Adapter delivered with the valve.

For more details on actuators, see separate technical leaflets.

Articles

Male threads according to ISO 228.

DN 15-25 – Temperature -10 – +90°C, ΔpV max. 400 kPa

Male threads according to ISO 228.

NPT threads - see "Connections".

DN	D	L	H1	H2	B	q_max [l/h]	Kg	EAN	Article No
15	G3/4	74	55	55	54	480	0,54	7318794027008	52 164-315
20	G1	85	64	55	64	975	0,69	7318794027107	52 164-320
25	G1 1/4	93	64	67	64	1750	0,79	7318794027206	52 164-325

*) Connection to actuator.

→ = Flow direction

DN 15-25 – Temperature -10 – +90°C, ΔpV max. 400 kPa

Male threads according to ISO 228.

DN 15-25 – Temperature -10 – +90°C, ΔpV max. 400 kPa

Male threads according to ISO 228.

NPT threads - see "Connections".

DN	D	L	H1	H2	B	q_max [l/h]	Kg	EAN	Article No
15	G3/4	74	55	55	54	480	0,54	7318794027008	52 164-315
20	G1	85	64	55	64	975	0,69	7318794027107	52 164-320
25	G1 1/4	93	64	67	64	1750	0,79	7318794027206	52 164-325

*) Connection to actuator.

→ = Flow direction

DN 65-150 – Temperature -10 – +120°C, ΔpV max. 800 kPa

Flanges according to ASME 7 ANSI B16.42 Class 150.

DN	Number of bolt holes	D	L	H	q_max [m³/h]	Kg	EAN	Article No
Class 150
65	4	180	290	249	24,1	18	3831112533295	322021-11003
65 HF	4	180	290	249	36,5	18	5902276810237	322021-11010
80	4	190	310	260	37,3	22	3831112533332	322021-11103
80 HF	4	190	310	260	49,0	22	5902276810275	322021-11111
100	8	230	350	280	51,7	33	3831112535541	322021-11202
100 HF	8	230	350	280	75,9	33	3831112535589	322021-11205
125	8	255	400	287	77,3	45	3831112535626	322021-11302
125 HF	8	255	400	287	127	45	3831112535664	322021-11305
150	8	280	480	357	126	75	3831112535725	322021-11402
150 HF	8	280	480	357	190	75	3831112535763	322021-11405

*) Connection to actuator.

→ = Flow direction

DN 65-150 – Temperature -10 – +120°C, ΔpV max. 800 kPa

Flanges according to ASME 7 ANSI B16.42 Class 150.

DN	Number of bolt holes	D	L	H	q_max [m³/h]	Kg	EAN	Article No
Class 150
65	4	180	290	249	24,1	18	3831112533295	322021-11003
65 HF	4	180	290	249	36,5	18	5902276810237	322021-11010
80	4	190	310	260	37,3	22	3831112533332	322021-11103
80 HF	4	190	310	260	49,0	22	5902276810275	322021-11111
100	8	230	350	280	51,7	33	3831112535541	322021-11202
100 HF	8	230	350	280	75,9	33	3831112535589	322021-11205
125	8	255	400	287	77,3	45	3831112535626	322021-11302
125 HF	8	255	400	287	127	45	3831112535664	322021-11305
150	8	280	480	357	126	75	3831112535725	322021-11402
150 HF	8	280	480	357	190	75	3831112535763	322021-11405

*) Connection to actuator.

→ = Flow direction

Male threads according to ISO 228.

DN 15-32 HP – Temperature -20 – +120°C, ΔpV max. 600 kPa

Male threads according to ISO 228.

NPT threads - see "Connections".

DN	D	L	H1	H2	B	q_max [l/h]	Kg	EAN	Article No
15	G3/4	74	55	55	54	480	0,60	7318794033405	52 164-415
20	G1	85	64	55	64	975	0,75	7318794033504	52 164-420
25	G1 1/4	93	64	67	64	1750	0,90	7318794033603	52 164-425
32	G1 1/2	117	78	70	78	3600	1,5	7318794027305	52 164-332

*) Connection to actuator.

→ = Flow direction

DN 15-32 HP – Temperature -20 – +120°C, ΔpV max. 600 kPa

Male threads according to ISO 228.

DN 15-32 HP – Temperature -20 – +120°C, ΔpV max. 600 kPa

Male threads according to ISO 228.

NPT threads - see "Connections".

DN	D	L	H1	H2	B	q_max [l/h]	Kg	EAN	Article No
15	G3/4	74	55	55	54	480	0,60	7318794033405	52 164-415
20	G1	85	64	55	64	975	0,75	7318794033504	52 164-420
25	G1 1/4	93	64	67	64	1750	0,90	7318794033603	52 164-425
32	G1 1/2	117	78	70	78	3600	1,5	7318794027305	52 164-332

*) Connection to actuator.

→ = Flow direction

Male threads according to ISO 228.

DN 40-50 – Temperature -10 – +90°C, ΔpV max. 400 kPa

Male threads according to ISO 228.

NPT threads - see "Connections".

DN	D	L	H	B	q_max [l/h]	Kg	EAN	Article No
40	G2	187	132	88	6500	3,5	7318794030602	52 164-340
50	G2 1/2	196	135	88	11200	3,9	7318794030701	52 164-350

*) Connection to actuator.

→ = Flow direction

DN 40-50 – Temperature -10 – +90°C, ΔpV max. 400 kPa

Male threads according to ISO 228.

DN 40-50 – Temperature -10 – +90°C, ΔpV max. 400 kPa

Male threads according to ISO 228.

NPT threads - see "Connections".

DN	D	L	H	B	q_max [l/h]	Kg	EAN	Article No
40	G2	187	132	88	6500	3,5	7318794030602	52 164-340
50	G2 1/2	196	135	88	11200	3,9	7318794030701	52 164-350

*) Connection to actuator.

→ = Flow direction

Connections

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With female thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Brass/AMETAL^®

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	1/2 NPT	25	7318794017900	52 163-215
20	G1	1/2 NPT	18	7318794018303	52 163-320
20	G1	3/4 NPT	23	7318794018006	52 163-220
25	G1 1/4	3/4 NPT	27	7318794018402	52 163-325
25	G1 1/4	1 NPT	27	7318794018105	52 163-225
32	G1 1/2	1 NPT	27	7318794018501	52 163-332
32	G1 1/2	1 1/4 NPT	31	7318794018204	52 163-232
40	G2	1 NPT	30	7318794033108	52 163-340
40	G2	1 1/2 NPT	32	7318794032903	52 163-240
50	G2 1/2	1 1/2 NPT	32	7318794033207	52 163-350
50	G2 1/2	2 NPT	32	7318794033009	52 163-250

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-Modulator.

With female thread NPT

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With female thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Brass/AMETAL^®

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	1/2 NPT	25	7318794017900	52 163-215
20	G1	1/2 NPT	18	7318794018303	52 163-320
20	G1	3/4 NPT	23	7318794018006	52 163-220
25	G1 1/4	3/4 NPT	27	7318794018402	52 163-325
25	G1 1/4	1 NPT	27	7318794018105	52 163-225
32	G1 1/2	1 NPT	27	7318794018501	52 163-332
32	G1 1/2	1 1/4 NPT	31	7318794018204	52 163-232
40	G2	1 NPT	30	7318794033108	52 163-340
40	G2	1 1/2 NPT	32	7318794032903	52 163-240
50	G2 1/2	1 1/2 NPT	32	7318794033207	52 163-350
50	G2 1/2	2 NPT	32	7318794033009	52 163-250

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-Modulator.

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With male thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Brass

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	1/2 NPT	29	4024052928415	2400-02.350
20	G1	3/4 NPT	32,5	4024052928514	2400-03.350
25	G1 1/4	1 NPT	35	4024052928613	2400-04.350

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-Modulator.

With male thread NPT

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With male thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Brass

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	1/2 NPT	29	4024052928415	2400-02.350
20	G1	3/4 NPT	32,5	4024052928514	2400-03.350
25	G1 1/4	1 NPT	35	4024052928613	2400-04.350

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-Modulator.

According to ASME/ANSI B16.18Swivelling nut

Soldering connection

According to ASME/ANSI B16.18
Swivelling nut

Brass/gunmetal CC491K (EN 1982)

Valve DN	D	Pipe Ø [in]	~ [mm]	L*	EAN	Article No
15	G3/4	0.629	16	16	7318794022904	52 009-715
20	G3/4	0.879	22	22	7318794023000	52 009-720
25	G1 1/4	1.130	29	26	7318794023109	52 009-725
32	G1 1/2	1.380	35	28	7318794023208	52 009-732
40	G2	1.630	41	31	7318794033900	52 009-740
50	G2 1/2	2.130	54	38	7318794034006	52 009-750

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-Modulator.

Soldering connection

According to ASME/ANSI B16.18Swivelling nut

Soldering connection

According to ASME/ANSI B16.18
Swivelling nut

Brass/gunmetal CC491K (EN 1982)

Valve DN	D	Pipe Ø [in]	~ [mm]	L*	EAN	Article No
15	G3/4	0.629	16	16	7318794022904	52 009-715
20	G3/4	0.879	22	22	7318794023000	52 009-720
25	G1 1/4	1.130	29	26	7318794023109	52 009-725
32	G1 1/2	1.380	35	28	7318794023208	52 009-732
40	G2	1.630	41	31	7318794033900	52 009-740
50	G2 1/2	2.130	54	38	7318794034006	52 009-750

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-Modulator.

Adapters for actuators

Adapters to other combinations of valve and recommended actuator are NOT needed.

Adapters

Adapters to other combinations of valve and recommended actuator are NOT needed.

Actuator	Valve DN	EAN	Article No
TA-MC50-C	25-32	3831112533851	322042-10700
TA-Slider 750	40-50	5902276819308	322042-80800
TA-MC253 SE	150	3831112535787	322042-01400

Adapters

Adapters to other combinations of valve and recommended actuator are NOT needed.

Adapters

Adapters to other combinations of valve and recommended actuator are NOT needed.

Actuator	Valve DN	EAN	Article No
TA-MC50-C	25-32	3831112533851	322042-10700
TA-Slider 750	40-50	5902276819308	322042-80800
TA-MC253 SE	150	3831112535787	322042-01400

Accessories

Spare part.

Venting plug

Spare part.

AMETAL^®

Valve DN	EAN	Article No
40-50	7318794033801	52 164-302

Venting plug

Spare part.

Venting plug

Spare part.

AMETAL^®

Valve DN	EAN	Article No
40-50	7318794033801	52 164-302

Suitable when insulation is used.

Venting extension

Suitable when insulation is used.

AMETAL^®

Valve DN	d	H	EAN	Article No
40-50	M10x1	32	7318794033702	52 164-301

Venting extension

Suitable when insulation is used.

Venting extension

Suitable when insulation is used.

AMETAL^®

Valve DN	d	H	EAN	Article No
40-50	M10x1	32	7318794033702	52 164-301

For heating/comfort cooling.Material: EPP.Fire class: DN 15-32: E (EN 13501-1), B2 (DIN 4102).DN 40-50: F (EN 13501-1), B3 (DIN 4102).

Insulation

For heating/comfort cooling.
Material: EPP.
Fire class:
DN 15-32: E (EN 13501-1), B2 (DIN 4102).
DN 40-50: F (EN 13501-1), B3 (DIN 4102).

Valve DN	L	H1	H2	D	EAN	Article No
15	100	61	71	84	7318794027404	52 164-901
20	118	67	79	90	7318794027503	52 164-902
25	127	71	84	104	7318794027602	52 164-903
32	154	85	99	124	7318794027701	52 164-904
40	277	105	-	131	7318794030800	52 164-905
50	277	105	-	131	7318794030909	52 164-906

Insulation

For heating/comfort cooling.Material: EPP.Fire class: DN 15-32: E (EN 13501-1), B2 (DIN 4102).DN 40-50: F (EN 13501-1), B3 (DIN 4102).

Insulation

For heating/comfort cooling.
Material: EPP.
Fire class:
DN 15-32: E (EN 13501-1), B2 (DIN 4102).
DN 40-50: F (EN 13501-1), B3 (DIN 4102).

Valve DN	L	H1	H2	D	EAN	Article No
15	100	61	71	84	7318794027404	52 164-901
20	118	67	79	90	7318794027503	52 164-902
25	127	71	84	104	7318794027602	52 164-903
32	154	85	99	124	7318794027701	52 164-904
40	277	105	-	131	7318794030800	52 164-905
50	277	105	-	131	7318794030909	52 164-906

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

Spindle extension for DN 15-20

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
M30x1,5.

L	EAN	Article No
Plastic, black
30	4024052165018	2002-30.700

Spindle extension for DN 15-20

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

Spindle extension for DN 15-20

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
M30x1,5.

L	EAN	Article No
Plastic, black
30	4024052165018	2002-30.700

For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

	EAN	Article No
Red	7318793961105	52 143-100

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

	EAN	Article No
Red	7318793961105	52 143-100

For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

Grip for setting wheel, optional

For better grip when presetting.
For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

Colour	EAN	Article No
Orange	7318794040502	52 164-950

Grip for setting wheel, optional

For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

Grip for setting wheel, optional

For better grip when presetting.
For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

Colour	EAN	Article No
Orange	7318794040502	52 164-950

Can be installed without draining of the system.AMETAL®/Stainless steel/EPDM

Measuring point, extension 60 mm

Can be installed without draining of the system.
AMETAL^®/Stainless steel/EPDM

For all dimensions.

L	EAN	Article No
60	7318792812804	52 179-006

Measuring point, extension 60 mm

Can be installed without draining of the system.AMETAL®/Stainless steel/EPDM

Measuring point, extension 60 mm

Can be installed without draining of the system.
AMETAL^®/Stainless steel/EPDM

For all dimensions.

L	EAN	Article No
60	7318792812804	52 179-006

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
Prevents manipulation of setting.

Suitable for DN 15-32.

EAN	Article No
7318794030206	52 164-100

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
Prevents manipulation of setting.

Suitable for DN 15-32.

EAN	Article No
7318794030206	52 164-100

Images

240002350

Select a format Download

52143100

Select a format Download

52164332

Select a format Download

TA-Modulator_DN50

Select a format Download

52164100

Select a format Download

52164420

Select a format Download

52164901-904_persp

Select a format Download

52164320

Select a format Download

TA-Modulator_DN15_metal

Select a format Download

52164301

Select a format Download

52164425

Select a format Download

TA-Modulator_DN50_persp

Select a format Download

TA-Modulator_DN80_persp

Select a format Download

TA-MODULATOR_persp_kat_w_path

Select a format Download

52164315

Select a format Download

32202111103

Select a format Download

52164350

Select a format Download

52163215

Select a format Download

52164415

Select a format Download

52164340

Select a format Download

TA-Modulator_DN15_metal_persp

Select a format Download

32202111003

Select a format Download

52164950

Select a format Download

52164325

Select a format Download

52164302

Select a format Download

TA-Modulator_DN80

Select a format Download

52164901-904

Select a format Download

Documentation

Technical specifications

TA-Modulator_NPT_ANSI_EN_low.pdf Download

Installation instructions

Legal documents

Drawings 2D/3D

TA-Modulator – NPT threads/ANSI flanges

Pressure independent balancing and control valve for modulating control

Precise temperature control

Precise control

Quick hydronic balancing

Easy troubleshooting

Application:

Functions:

Dimensions:

Pressure class:

Differential pressure (ΔpV):

Flow range:

Temperature:

Media:

Lift:

Rangeability:

Leakage rate:

Characteristics:

Material:

Surface treatment:

Marking:

Connection:

Connection to actuator:

Actuators:

DN 15-25 – Temperature -10 – +90°C, ΔpV max. 400 kPa Male threads according to ISO 228. Download

DN 15-25 – Temperature -10 – +90°C, ΔpV max. 400 kPa

DN 65-150 – Temperature -10 – +120°C, ΔpV max. 800 kPa Download

DN 65-150 – Temperature -10 – +120°C, ΔpV max. 800 kPa

DN 15-32 HP – Temperature -20 – +120°C, ΔpV max. 600 kPa Male threads according to ISO 228. Download

DN 15-32 HP – Temperature -20 – +120°C, ΔpV max. 600 kPa

DN 40-50 – Temperature -10 – +90°C, ΔpV max. 400 kPa Male threads according to ISO 228. Download

DN 40-50 – Temperature -10 – +90°C, ΔpV max. 400 kPa

With female thread NPT Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut Download

With female thread NPT

With male thread NPT Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut Download

With male thread NPT

Soldering connection According to ASME/ANSI B16.18Swivelling nut Download

Soldering connection

Adapters Adapters to other combinations of valve and recommended actuator are NOT needed. Download

Adapters

Venting plug Spare part. Download

Venting plug

Venting extension Suitable when insulation is used. Download

Venting extension

Insulation For heating/comfort cooling.Material: EPP.Fire class: DN 15-32: E (EN 13501-1), B2 (DIN 4102).DN 40-50: F (EN 13501-1), B3 (DIN 4102). Download

Insulation

Spindle extension for DN 15-20 Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5. Download

Spindle extension for DN 15-20

Protection cap For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM. Download

Protection cap

Grip for setting wheel, optional For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32). Download

Grip for setting wheel, optional

Measuring point, extension 60 mm Can be installed without draining of the system.AMETAL®/Stainless steel/EPDM Download

Measuring point, extension 60 mm

Tamper proof cover Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting. Download

Tamper proof cover

240002350

52143100

52164332

TA-Modulator_DN50

52164100

52164420

52164901-904_persp

52164320

TA-Modulator_DN15_metal

52164301

52164425

TA-Modulator_DN50_persp

TA-Modulator_DN80_persp

TA-MODULATOR_persp_kat_w_path

52164315

32202111103

52164350

52163215

52164415

52164340

TA-Modulator_DN15_metal_persp

32202111003

52164950

52164325

Male threads according to ISO 228.

Male threads according to ISO 228.

Male threads according to ISO 228.

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

According to ASME/ANSI B16.18Swivelling nut

Adapters to other combinations of valve and recommended actuator are NOT needed.

Spare part.

Suitable when insulation is used.

For heating/comfort cooling.Material: EPP.Fire class: DN 15-32: E (EN 13501-1), B2 (DIN 4102).DN 40-50: F (EN 13501-1), B3 (DIN 4102).

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

Can be installed without draining of the system.AMETAL®/Stainless steel/EPDM

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.