Features & Benefits

    Convenient, reliable setup

    Fully customisable by smartphone via Bluetooth using a TA-Dongle.

    Fully configurable

    More than 200 setup options allow input and output signals, binary input, relay, characteristics and many other parameters to be configured.

    Easy diagnostics

    Tracks the last 10 errors to allow system faults to be found quickly.

    Perfection in connectivity

    Communication with the most used Bus protocols.

    Technical description

    Functions:

    Proportional control
    3-point control
    On-off control
    Manual override
    Stroke detection
    Mode, status and position indication
    Output signal VDC
    Stroke limitation setting
    Minimum stroke setting
    Valve blockage protection
    Valve clogging detection
    Error safe position
    Diagnostic/Logging
    Delayed start-up

    Plus version:
    With optional BUS communication board
    + ModBus or BACnet
    With optional relay board
    + 1 binary input, max. 100 Ω, cable max. 10 m or shielded.
    + 2 relays, max. 5A, 30 VDC/250 VAC on resistive load
    + Output signal in mA

    Supply voltage:

    24 VAC/VDC ±15%.
    100-240 VAC ±10%.
    Frequency 50/60 Hz ±3 Hz.

    Power consumption:

    24 VAC/VDC:
    Operation: < 10.8 VA (VAC); < 7.7 W (VDC)
    Standby: < 1 VA (VAC); < 0.5 W (VDC)
    100-240 VAC:
    Operation: < 14.2 VA (VAC)
    Standby: < 1.8 VA (VAC)

    Input signal:

    0(2)-10 VDC, Ri 47 kΩ.
    Adjustable sensitivity 0.1-0.5 VDC.
    0.33 Hz low pass filter.
    0(4)-20 mA Ri 500 Ω.
    Proportional:
    0-10, 10-0, 2-10 or 10-2 VDC
    0-20, 20-0, 4-20 or 20-4 mA
    Proportional split-range:
    0-5, 5-0, 5-10 or 10-5 VDC
    0-4.5, 4.5-0, 5.5-10 or 10-5.5 VDC
    2-6, 6-2, 6-10 or 10-6 VDC
    0-10, 10-0, 10-20 or 20-10 mA
    4-12, 12-4, 12-20 or 20-12 mA
    Proportional dual-range (for change-over):
    0-3.3 / 6.7-10 VDC,
    10-6.7 / 3.3-0 VDC,
    2-4.7 / 7.3-10 VDC or
    10-7.3 / 4.7-2 VDC.
    Default setting: Proportional 0-10 VDC.

    Output signal:

    0(2)-10 VDC, max. 8 mA, min. 1.25 kΩ.
    Plus version:
    0(4)-20 mA, max. 700 Ω.
    Ranges: See “Input signal”.
    Default setting: Proportional 0-10 VDC.

    Characteristics:

    Linear, EQM 0.25 and inverted EQM 0.25.
    Default setting: Linear.

    Control speed:

    3, 4, 6, 8, 12 or 16 s/mm
    Default setting: 3 s/mm

    Adjusting force:

    1250 N

    Temperature:

    Media temperature: 0°C – +120°C
    Operating environment: 0°C – +50°C (5-95%RH, non-condensing)
    Storage environment: -20°C – +70°C (5-95%RH, non-condensing)

    Ingress protection:

    IP54

    all directions

    (according to EN 60529)

    Protection class:

    (according to EN 61140).
    100-240 VAC: Class I.
    24 VAC/VDC: Plus version with optional relay board, Class I.
    All other versions, Class III safety extra low voltage.

    Stroke:

    22 mm

    Automatic detection of the valve lift (stroke detection).

    Noise level:

    Max. 40 dBA

    Weight:

    1,6 kg

    Connection to valve:

    By two M8 screws to the valve and by quick connection to the stem.

    Material:

    Cover: PBT
    Bracket: Alu EN44200

    Colour:

    Orange RAL 2011, grey RAL 7043.

    Marking:

    IMI TA, product name, article No. and technical specification.
    LED indication description.

    Certification CE:

    LV-D. 2014/35/EU: EN 60730-1, -2-14.
    EMC-D. 2014/30/EU: EN 60730-1, -2-14.
    RoHS-D. 2011/65/EU: EN 50581.

    Product standard:

    EN 60730.

    (for Residential and industrial areas)

    Cable:

    Wire cross-section*: 0.5-2.0 mm2
    Protection class I: H05VV-F or similar
    Protection class III: LiYY or similar

    *) Note: Wire cross-sections must be chosen according to actuator power consumption and line length, such as the voltage supply to the actuator does not go below 20.4 VAC/VDC (24 VAC/VDC minus 15%).
    In case of VDC input signal on a 24 VAC/VDC powered actuator, the voltage drop on neutral line must be smaller than the defined hysteresis level for the VDC input signal.

    Articles

    TA-Slider 1250

    Input signal: 0(2)-10 VDC, 0(4)-20 mA, 3-point, on-off

    Supply voltage
    EAN
    Article No
    24 VAC/VDC
    5901688828533
    322227-10110
    100-240 VAC
    5902276883828
    322227-40110

    TA-Slider 1250 Plus

    Input signal: 0(2)-10 VDC, 0(4)-20 mA, 3-point, on-off

    With binary input, relays, mA output signal

    Supply voltage
    BUS
    EAN
    Article No
    24 VAC/VDC
    -
    5902276883989
    322227-10219
    100-240 VAC
    -
    5902276883996
    322227-40219

    With BUS communication (without binary input, relays, mA output signal)

    Supply voltage
    BUS
    EAN
    Article No
    24 VAC/VDC
    Modbus/RTU
    RS 485
    5901688828564
    322227-12210
    BACnet MS/TP
    RS 485
    5901688828571
    322227-13210
    Modbus/TCP
    Ethernet
    5901688828588
    322227-14210
    BACnet/IP
    Ethernet
    5901688828601
    322227-16210
    100-240 VAC
    Modbus/RTU
    RS 485
    5902276883859
    322227-42210
    BACnet MS/TP
    RS 485
    5902276883866
    322227-43210
    Modbus/TCP
    Ethernet
    5902276883873
    322227-44210
    BACnet/IP
    Ethernet
    5902276883897
    322227-46210

    With BUS communication, binary input, relays, mA output signal

    Supply voltage
    BUS
    EAN
    Article No
    24 VAC/VDC
    Modbus/RTU
    RS 485
    5902276883774
    322227-12219
    BACnet MS/TP
    RS 485
    5902276883781
    322227-13219
    Modbus/TCP
    Ethernet
    5902276883798
    322227-14219
    BACnet/IP
    Ethernet
    5902276883811
    322227-16219
    100-240 VAC
    Modbus/RTU
    RS 485
    5902276883910
    322227-42219
    BACnet MS/TP
    RS 485
    5902276883927
    322227-43219
    Modbus/TCP
    Ethernet
    5902276883934
    322227-44219
    BACnet/IP
    Ethernet
    5902276883958
    322227-46219
    Additional equipment

    For Bluetooth communication with the HyTune app, transfer configuration settings and manual override.

    TA-Dongle

    For Bluetooth communication with the HyTune app, transfer configuration settings and manual override.

    EAN
    Article No
    5901688828632
    322228-00001
    Accessories

    Including spindle top (extension) and extended screws.Temperature range till -10 °C.Voltage 24 VAC ±10% 50/60 Hz ±5%.Power PN approx. 30 W.Current 1,4 A.Surface temperature max. 50 °C.

    Stem heater

    Including spindle top (extension) and extended screws.
    Temperature range till -10 °C.
    Voltage 24 VAC ±10% 50/60 Hz ±5%.
    Power PN approx. 30 W.
    Current 1,4 A.
    Surface temperature max. 50 °C.

    For valve
    DN
    L
    H
    W
    D
    EAN
    Article No
    146
    49
    70
    30
    TA-FUSION
    65-150
    3831112533448
    322042-81400
    KTM 512
    80-125
    3831112533455
    322042-81401

    32222746210

    Select a format Download

    32222716219

    Select a format Download

    32222746219

    Select a format Download

    32222744219

    Select a format Download

    32222712219

    Select a format Download

    32222716210

    Select a format Download

    32222714219

    Select a format Download

    32222713210

    Select a format Download

    32222710110

    Select a format Download

    32222744210

    Select a format Download

    32222713219

    Select a format Download

    32222742219

    Select a format Download

    32222742210

    Select a format Download

    32222712210

    Select a format Download

    32222740110

    Select a format Download

    32222714210

    Select a format Download

    32222743210

    Select a format Download

    32222743219

    Select a format Download

    Drawings