We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimize every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off which helps to reduce commissioning time and protect the valve and actuator from overloading.
Protected hand drive for a safe manual operation which enables easy troubleshooting.
The actuator housing cover is easy to remove (without screws). Parameters can be easily changed on site without using a Laptop.
TA-MC100FSE: Actuator's stem extended on power failureTA-MC100FSR: Actuator's stem retracted on power failure
24 VAC ±15%Frequency 50-60 Hz ±5%
0(2)-10 VDC 0,5 mA, Ri 20kΩ0(4)-20 mAStarting point and inverted signal with internal micro switches.
0(2)-10 VDC, max. 5 mA0(4)-20 mA
S3-50% ED c/h 1200, EN 60034-1
Automatic detection of the valve lift.
Max. ambient temperature: 122°FMin. ambient temperature: 32°F
(according to EN 60730)III
Max. 0.79 in
Actuator with terminal
Simple attachment to the valve by means of M8 screws. For some valve types an adapter may be needed. Please see accessories section.
Black body and red cover.
TA, Article No, product name and technical specification.
High performance proportional actuators with fail-safe extending (FSE) or retracting (FSR) function and automatic stroke adaptation which provide accurate modulating or 3-point control when used together with combined control and balancing valves – both with or without integrated Δp controller – as well as stand-alone 2-way and 3-way control valves from IMI Hydronic Engineering.
With fail-safe extending function.
Adapters for TA "Standard control valves" (CVxxx) are included. Additional adapters for other TA valves see "Accessories".
With fail-safe retracting function.
*) Integrated in the valve (no extra part needed).
1) For KTM 512 size 2 1/2" and up, other actuators may be required depending upon the maximum static inlet pressure of the system. Please see full KTM 512 datasheet selection table for further details.
Including spindle top (extension) and extended screws.Temperature range till 14 °F.Voltage 24 VAC ± 10% 50/60 Hz ± 5%.Power PN approx. 30 W.Current 1.4 A.Surface temperature max. 122 °F.
Please use the below link to browse and download IMI Hydronic Engineering BIM files for Revit. It requires a free registration.