We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimize every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off which helps to reduce commissioning time and protect the valve and actuator from overloading.
Protected hand drive for a safe manual operation which enables easy troubleshooting.
The actuator housing cover is easy to remove (without screws). Parameters can be easily changed on site.
Modulating or 3-point control.
24 VAC/VDC ±10%Frequency 50-60 Hz ±5%
0(2)-10 VDC, Ri ~20 kΩ. Signal direction and starting point adjustable by micro switches.3-point control.
TA-MC15: 33.7 lbfTA-MC15-C: 45.0 lbf
Max. ambient temperature: 122°FMin. ambient temperature: 32°F
(according to EN 60730)24 V: III
Max. 0.35 in
4.9 ft, with wire end sleeve.24 V: 20 AWG (0.5 mm2)
Retainer nut M30x1,5 of brass.
Black body and red cover.
IMI TA, CE, Article No, product name and technical specification.
High performance proportional actuators with automatic stroke adaptation which provide accurate modulating or 3-point control when used together with 2-way and 3-way control valves from IMI Hydronic Engineering.
Please use the below link to browse and download IMI Hydronic Engineering BIM files for Revit. It requires a free registration.