We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimize every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off which helps to reduce commissioning time and protect the valve and actuator from overloading.
Protected hand drive for a safe manual operation which enables easy troubleshooting.
The actuator housing cover is easy to remove (without screws). Parameters can be easily changed on site without using a Laptop.
For modulating or 3-point control.
TA-MC160/24: 24V AC ±10%TA-MC160/115: 115V AC +6%, -10%Frequency 50-60 Hz ±5%
TA-MC160/24: 6 VATA-MC160/115: 12 VA
0(2)-10 VDC, Ri ~77 kΩ0(4)-20 mA, Ri ~510 Ω.Signal direction and starting point adjustable by micro switches.3-point control.
0-10 VDC, max. 8 mA, min. 1.2 kΩ.
0.05 V / 0.15 V / 0.3 V / 0.5 V
Electric: 0.04 VDCMechanical: 0.002 in
0.39 or 0.59 in/min
S3-50% ED c/h 1200, EN 60034-1
Automatic detection of the valve lift.
Max. ambient temperature: 140°FMin. ambient temperature: 32°F
(according to EN 60730)24V: III 115V: II
Automatic detection of broken control wire.Automatic detection of blocked valve.
Actuator with screwed terminals.
Simple attachment to the valve by means of M8 screws. For some valve types an adapter may be needed. Please see accessories section.
Black body and red cover.
TA, Article No, product name and technical specification.
- Position switch unit 1): ►2 switches (WE1/WE2), potential free, infinitely adjustable. ►Rated load: 8 A / 250 VAC, 8 A / 30 VDC. ►Switching voltage: max. 400 VAC, max. 125 VDC- Ingress protection: IP65- Output signal 1): X=0(4)...20 mA- Adapter with coupling for external product
For variants and accessories please contact your local sales office.
1) Position switch unit and output signal 0(4)...20 mA not in combination.
Articles – TA-MC160
High performance proportional actuators with automatic stroke adaptation which provide accurate modulating, 3-point or on/off control when used together with combined control and balancing valves – both with or without integrated Δp controller – as well as stand-alone 2-way and 3-way control valves from IMI Hydronic Engineering.
TA-MC55, TA-MC100, TA-MC160
Please use the below link to browse and download IMI Hydronic Engineering BIM files for Revit. It requires a free registration.