TA-Slider 160 KNX

IMI TA
Compare
​​​​​​​ Digitally configurable proportional push actuator for Bus communication with KNX – 36/45 lbf (160/200 N) Digitally configurable actuators for Bus communication with KNX. A wide range of setup options provide extensive flexibility for on-site parameter adaptation. Fully programmable binary input, relay and adjustable max. stroke of the valve bring new opportunities for advanced hydronic control and balancing.

Fully configurable

More than 100 setup options allow input and output signals, binary input, relay, characteristics and many other parameters to be configured.

Easy diagnostics

Reports five different types of errors to allow system faults to be found quickly.

Perfection in connectivity

Dedicated versions allow configuring, controlling and communicating via KNX Bus.

Technical description

Functions:

Proportional control
Stroke detection
Mode, status and position indication
Stroke limitation setting
Valve blockage protection
Valve clogging detection
Error safe position
Diagnostic/Logging

KNX version:
+ 1 binary input, max. 100 Ω, cable max. 32.8 ft or shielded.

KNX R24 version:
+ 1 binary input, max. 100 Ω, cable max. 32.8 ft or shielded.
+ 1 relay, max. 2A, 30 VAC/VDC on resistive load.

Supply voltage:

Powered by KNX Bus.

Power consumption:

Typical 216 mW; Maximum 600 mW.

Input signal:

By KNX Bus.

Output signal:

By KNX Bus.

Characteristics:

Linear, EQM 0.25 and inverted EQM 0.25.
Default setting: Linear.

Control speed:

254 s/in (10 s/mm)

Adjusting force:

36/45 lbf (160/200 N)

Self-adjusting for IMI Hydronic Engineering valves.

Temperature:

Media temperature: max. 248°F
Operating environment: 32°F to 122°F (5-95%RH, non-condensing)
Storage environment: -4°F to 158°F (5-95%RH, non-condensing)

Ingress protection:

IP54

(all directions)

(according to EN 60529)

Protection class:

(according to EN 61140)

III (SELV)

Cable:

3.28 ft, 6.56 ft or 16.4 ft.
Halogen free as option, fire class B2ca – s1a, d1, a1 according to EN 50575.
KNX: type J-YY, 2x2x19 AWG (2x2x0.6 mm2).
KNX R24: type J-YY, 2x2x19 AWG (2x2x0.6 mm2) and relay cable type LiYY, 3x22 AWG (3x0.34 mm2), with wire end sleeves.

Stroke:

0.27 in (6.9 mm)

Automatic detection of the valve lift (stroke detection).

Noise level:

Max. 30 dBA

Weight:

0.44 lb

Connection to valve:

Retainer nut M30x1.5.

Material:

Cover: PC/ABS GF8
Housing: PA GF40.
Swivelling nut: Nickel-plated brass.

Color:

White RAL 9016, grey RAL 7047.

Marking:

Label: IMI TA, CE, product name, article No. and technical specification.

Certification CE:

LV-D. 2014/35/EU: EN 60730-1, -2-14.
EMC-D. 2014/30/EU: EN 60730-1, -2-14.
RoHS-D. 2011/65/EU: EN 50581.

Product standard:

EN 60730.

Articles - TA-Slider 160 KNX

TA-Slider 160 KNX

Twisted pair; KNX/TP

With binary input

Cable length
Bus
EAN
Article No
3.28 ft. (1 m)
KNX
5902276883392
322224-01001
6.56 ft. (2 m)
KNX
5902276883408
322224-01002
16.4 ft. (5 m)
KNX
5902276883415
322224-01003
With halogen free cable
3.28 ft. (1 m)
KNX
5902276883422
322224-01004
6.56 ft. (2 m)
KNX
5902276883439
322224-01005
16.4 ft. (5 m)
KNX
5902276883446
322224-01006

Articles - TA-Slider 160 KNX R24

TA-Slider 160 KNX R24

Twisted pair; KNX/TP

With binary input and relay 24V

Cable length
Bus
EAN
Article No
3.28 ft. (1 m)
KNX
5902276896019
322224-01301
6.56 ft. (2 m)
KNX
5902276896026
322224-01302
16.4 ft. (5 m)
KNX
5902276896033
322224-01303
With halogen free cable
3.28 ft. (1 m)
KNX
5902276896040
322224-01304
6.56 ft. (2 m)
KNX
5902276896057
322224-01305
16.4 ft. (5 m)
KNX
5902276896064
322224-01306

Additional equipment

Programming magnet

For programming the physical addresses without contact.

EAN
Article No
4024052149919
1865-01.433

Name Document Type Download All
TA-Slider_160_KNX_US_low.pdf Technical Specifications
TA-Slider_160KNX_instruction.pdf Installation Instructions
TA-Slider_160KNX_Protocol_Implementation.pdf Bus Protocol Implementations
TA-Slider_160KNX_R24_Protocol_Implementation.pdf Bus Protocol Implementations
TA-Slider_160_KNX_v1_1.knxprod Bus Protocol Implementations
TA-Slider_160_KNX_v1_2.knxprod Bus Protocol Implementations
TA-Slider_160_KNX_R24_v1_2.knxprod Bus Protocol Implementations
Decl_of_Conf_TA-Slider-160_KNX.pdf Legal Documents
Decl_of_Conf_TA-Slider-160_KNX-R24.pdf Legal Documents

Ask an Expert


product