We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimize every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Fully customisable by smartphone via Bluetooth using a TA-Dongle.
More than 200 setup options allow input and output signals, binary input, relay, characteristics and many other parameters to be configured.
Tracks the last 10 errors to allow system faults to be found quickly.
Identical settings can be quickly copied from TA-Dongle to several TA-Slider actuators.
Proportional controlManual override (TA-Dongle)Stroke detectionSelf-adjusting forceMode, status and position indicationStroke limitation settingMinimum stroke settingValve blockage protectionValve clogging detectionError safe positionDiagnostic/LoggingDelayed start-upI/O version:+ 1 binary input, max. 100 Ω, cable max. 32.8 ft or shielded.+ Output signalPlus version:+ 1 binary input, max. 100 Ω, cable max. 32.8 ft or shielded.+ 1 relay, max. 5A, 30 VDC/250 VAC on resistive load.+ Output signalCO (change-over) version:+ 1 binary input, max. 100 Ω, cable max. 32.8 ft or shielded.+ 1 relay, internally wired for control of TA-M106 actuator on TA-6-way valve (max. 2A, 30 VAC on resistive load).+ Output signal
24 VAC/VDC ±15%.Frequency 50/60 Hz ±3 Hz.CO version: 24 VAC ±15%.Frequency 50/60 Hz ±3 Hz.
Operation: < 1.0 VA (VAC); < 0.6 W (VDC)Standby: < 0.5 VA (VAC); < 0.25 W (VDC)I/O, CO versions:Operation: < 1.3 VA (VAC); < 0.7 W (VDC)Standby: < 0.5 VA (VAC); < 0.25 W (VDC) Plus version:Operation: < 1.8 VA (VAC); < 1.0 W (VDC)Standby: < 0.5 VA (VAC); < 0.25 W (VDC)CO version: TA-M106 actuator consumption must be added separately.
0(2)-10 VDC, Ri 47 kΩ. Adjustable hysteresis sensitivity 0.1-0.5 VDC.0.33 Hz low pass filter.Proportional:0-10, 10-0, 2-10 or 10-2 VDC.Proportional split-range:0-5, 5-0, 5-10 or 10-5 VDC.0-4.5, 4.5-0, 5.5-10 or 10-5.5 VDC.2-6, 6-2, 6-10 or 10-6 VDC.Proportional dual-range (for change-over):0-3.3 / 6.7-10 VDC,2-4.7 / 7.3-10 VDC,0-4.5 / 5.5-10 VDC or2-5.5 / 6.5-10 VDC.Default setting: Proportional 0-10 VDC.
I/O, Plus, CO versions:0(2)-10 VDC, max. 8 mA, min. 1.25 kΩ.Ranges: See “Input signal”.Default setting: Proportional 0-10 VDC.
Linear, EQM 0.25 and inverted EQM 0.25.Default setting: Linear.
254 s/in (10 s/mm)
36/45 lbf (160/200 N)
Self-adjusting for IMI Hydronic Engineering valves.
Media temperature: max. 248°FOperating environment: 32°F to 122°F (5-95%RH, non-condensing)Storage environment: -4°F to 158°F (5-95%RH, non-condensing)
(according to EN 60529)
(according to EN 61140)
III (SELV) TA-Slider 160, 160 I/O, 160 COII TA-Slider 160 Plus (protective insulation)
3.28 ft, 6.56 ft or 16.4 ft. With wire end sleeves.Halogen free as option, fire class B2ca – s1a, d1, a1 according to EN 50575.TA-Slider 160: type LiYY, 3x23 AWG (3x0.25 mm2).TA-Slider 160 I/O: type LiYY, 5x23 AWG (5x0.25 mm2).TA-Slider 160 Plus: type LiYY, 5x23 AWG (5x0.25 mm2) and relay cable type H03VV-F, 3x18 AWG (3x0.75 mm2), with wire end sleeves.TA-Slider 160 CO: type LiYY, 5x23 AWG (5x0.25 mm2) and relay cable type LiYY, 3x22 AWG (3x0.34 mm2), with connector to actuator TA-M106.
0.27 in (6.9 mm)
Automatic detection of the valve lift (stroke detection).
Max. 30 dBA
TA-Slider 160, I/O:0.44 lb, 3.28 ft relay cable 0.55 lb, 6.56 ft relay cable0.84 lb, 16.4 ft relay cableTA-Slider 160 Plus, CO:0.62 lb, 3.28 ft relay cable 0.83 lb, 6.56 ft relay cable1.47 lb, 16.4 ft relay cable
Retainer nut M30x1.5.
Cover: PC/ABS GF8Housing: PA GF40.Swivelling nut: Nickel-plated brass.
White RAL 9016, grey RAL 7047.
Label: IMI TA, CE, product name, article No. and technical specification.
LV-D. 2014/35/EU: EN 60730-1, -2-14.EMC-D. 2014/30/EU: EN 60730-1, -2-14.RoHS-D. 2011/65/EU: EN 50581.
Articles – TA-Slider 160
Digitally configurable actuators with or without change-over, and a wide range of setup options provide extensive flexibility for on-site parameter adaptation. Fully programmable binary input, relay and adjustable max. stroke of the valve bring new opportunities for advanced hydronic control and balancing.
Input signal: 0(2)-10 VDC
Articles – TA-Slider 160 I/O
Articles – TA-Slider 160 Plus
Articles – TA-Slider 160 CO
For Bluetooth communication with the HyTune app, transfer configuration settings and manual override.
Please use the below link to browse and download IMI Hydronic Engineering BIM files for Revit. It requires a free registration.