We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimize every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
eliminates over flows
the valve is suitable for installation both left and right side of the radiator
Two-pipe heating systems
Max. working temperature: 120 °C, with cover 90 °C.Min. working temperature: –10 °C
The flow can be stepless pre-set within the range: 0.044 – 0.66 gpm.Delivery setting 0.66 gpm.
Max. differential pressure: 8.7 psi (<30 dB(A))Min. differential pressure: 0.044 – 0.44 gpm = 1.45 psi0.44 – 0.66 gpm = 2.175
Valve body: Corrosion resistant Gunmetal.O-rings: EPDM rubberValve disc: EPDM rubberReturn spring: Stainless steelValve insert: Brass, PPS (polyphenylsulphide)The complete thermostatic insert can be replaced using the fitting tool without draining the system.Spindle: Niro-steel spindle with double O-ring sealing.Cover: ABS
Valve body and fittings are nickel-plated.
THE and II+ Designation. Protection cap orange.
Adapters for R1/2 and G3/4, for radiator connections. Tolerance compensation ±1,0 mm with special union nuts and flexible flat seal system for installation free of tension.
G3/4 male thread for compression fittings for plastic, copper, precision steel or multi-layer pipe.
Multilux V Eclipse
Multilux V Eclipse is connected in two-pipe systems to radiators with a lower two-point connection such as bathroom radiators, design radiators, universal radiators or radiators with integrated valves. For radiators with integrated valves Multilux V Eclipse is also used as connection fitting without thermostatic head. The valve has a unique integrated ﬂow limiter that eliminates over ﬂows. The required ﬂow rate can be adjusted with one twist directly at the valve. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary. Centre-to-centre distance of connections 50 mm. Thermostatic insert and shut-off insert are interchangeable. Therefore the valve is suitable for installation both left and right side of the radiator.
Female threadNickel plated gunmetal
*) Bearing surface seal top edge.**) Value at the bearing surface thermostatic head or actuator.
made of plastic.For angle and straight forms.
for Eclipse. Color orange.
for 1/2"-hose connection.
for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Metal-to-metal joint. Brass nickel-plated. With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.
for copper or precision steel pipe with a wall thickness of 1 mm.
for copper or precision steel pipe according to DIN EN 1057/10305-1/2 and stainless steel pipe. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Soft sealed, max. 95°C. Nickel-plated brass.
for Alu/PEX multi-layer pipe according to DIN 16836. Connection male thread G3/4 according to DIN EN 16313 (Eurocone).Nickel-plated brass.
for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Nickel plated brass.
Dividable in the middle, made of plastic, white, for various pipe diameters. Centre distance 50 mm.Overall height max. 31 mm.
complete with case, box spanner and replacement seals, for replacing thermostatic inserts without draining off the heating system (for DN 10 to DN 20).
for differential pressure measurement at thermostatic valve bodies with TA-SCOPE balancing instrument.
with automatic flow limiter for Eclipse.
consisting of 2 adapter pieces G3/4 x G3/4.Brass nickel-plated.
High performance thermoelectric actuator – For ON/OFF or PWM control
With built-in sensor and remote sensor
With built-in sensor