We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimize every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Due to integrated flow controller inside each thermostatic insert
For functional check
corrosion-resistant, durable and safe
Floor heating systems
Individual room temperature control with actuator or thermostatic headFlow limitationShut-offFillingDrainingFlushingVenting
The flow can be stepless pre-set within the range: 0.132 – 1.321 gpm.Delivery setting: Commissioning setting.Max. 2,5 m3/h per heating circuit manifold.
Max. differential pressure: 60 kPa (<30 dB(A))Min. differential pressure: 30 – 150 l/h = 17 kPa150 – 300 l/h = 25 kPa
Max. working temperature: 70°CMin. working temperature: -5°C
Manifold:Stainless steel 1.4301Connection fittings: Nickel-plated brass.Thermostatic insert:BrassO-rings: EPDMValve disc: EPDMSpring: stainless steelThermostatic insert: Brass, PPS (polyphenylsulphide)Spindle: Niro-steel spindle with double O-ring seal.Flow meter:Heat-resistant plastic and stainless steel. Brass. EPDM seals.Filling, draining, flushing and venting device:Nickel-plated brass and plastic. EPDM seals.
The following manifold connection kits are available:- Connection kit 1 with Globo ball valves.- Connection kit 2 with STAD balancing valve and Globo ball valve.- Connection kit 3 with Zeparo Vent air separator in supply pipe and Zeparo Dirt sludge separator in return.- Connection kit 4 with Globo ball valve, including spacer for heat meter in return and Globo ball valve with connection for direct measurement in supply and return pipe.- Connection kit 5 ﬁxed value control station with high-efﬁciency pump for controlling the supply temperature.
Manifold with ﬂat-sealing connection, 1" union nut.Heating circuit connection G3/4 adaptor with Eurocone suitable for compression fittings for plastic, copper, precision steel and multi-layer pipe.See also accessories.
Manifold boxes available as ﬂush-mounted versions.
Dynacon Eclipse adjusts the ﬂow rate in the individual heating circuits directly in l/h. This means hydraulic balancing is achieved in one simple operation. The set ﬂow rate is constantly adapted, i.e. if the rate becomes too high, e.g. due to closing adjacent circuits, Dynacon Eclipse controls the ﬂow automatically to the set value. The control cartridge always ensures a constant ﬂow. This makes Dynacon Eclipse heating circuit manifolds a time and cost-saving solution especially for system commissioning.
with red end cap in supply and blue end cap in return.
including measuring nipple for measuring differential pressure and ﬂow rate.
For connection kit 3. Installation aid for return in manifold boxes.
Globo ball valve with connection G1/4 for direct measurement in supply and return.
with high-efﬁciency pump Grundfos Alpha 2 15 - 60 130, thermostatic valve with contact sensor and electrical pipe contact safety switch 230V, 15A. Minimum installation depth manifold boxes: 125 mm.
Flush-mounted box, installation depth 110 - 150 mm.Note the minimum installation depth 125 mm for connection set 5!
Cvs = gpm at a pressure drop of 1 psi and fully open valve.
for Eclipse. Color orange.
Two-point thermal actuator for floor heating systems. With position indicator in NC version. Suitable for all Heimeier thermostatic valve bodies. For technical data, please refer to the EMOtec datasheet.
with thermal recirculation, controls the room temperature in connection with thermal actuators.
electronic two-point room thermostat for time-dependent control of the room temperature, with analog 7-day automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact.
electronic two-point room thermostat for time-dependent control of the room temperature, with digital automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact. Menu-driven via four buttons.
This unit is used for wiring thermostats and electro-thermal actuators. The unit is suitable for underfloor heating and cooling (summer/winter operation). It is possible to switch over between heating and cooling via an external signal. The pump logic enables enery-optimised pump control. For up to 6 zones (rooms). Ready to plug in to a 230 V power socket.
battery-driven electronic Fuzzy controller, including battery.
Receives the room transmitters radio signals. With 8 or 6 output channels for the connection of the thermal actuators.
Remote dial with built-in sensor. Liquid filled sensor.Setting range 0 °C to 27 °C.
for all HEIMEIER thermostatic valve bodies. With direct connection, white.
For connecting to plastic, copper, precision steel or multi-layer pipes. For valves with male thread connection G3/4.Brass nickel-plated.
for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Nickel-plated brass.
for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Metal-to-metal joint. Nickel-plated brass. With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.
for copper or precision steel pipe with a 1 mm wall thickness. Brass.
for copper or precision steel pipe according to DIN EN 1057/10305-1/2 and stainless steel pipe. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Soft sealed, max. 95°C. Nickel-plated brass.
for Alu/PEX multi-layer pipe according to DIN 16836. Connection male thread G3/4 according to DIN EN 16313 (Eurocone).Nickel-plated brass.
For clamping plastic, copper, precision steel or multi-layer pipes.Brass, nickel-plated.
Both sides for clamping plastic, copper, precision steel or multi-layer pipes.Brass nickel-plated.
with automatic flow limiter for Dynacon Eclipse.
Please use the below link to browse and download IMI Hydronic Engineering BIM files for Revit. It requires a free registration.
Thermal actuator for heating, ventilation, and air conditioning systems
Electro-mechanical room thermostat for thermal actuators
Electronic room thermostat with clock for thermal actuators
Radio control system for floor heating