TA-COMPACT-P

IMI TA
Compare
​​​​​​​ Pressure independent balancing and control valve (PIBCV) The pressure independent balancing and control valve TA-COMPACT-P ensures optimum performance over a long life. Adjustable maximum flow enables design flow and eliminates over flows for accurate hydronic control. The TA-COMPACT-P together with our balancing instruments enables advanced measuring and diagnostics.

Precise hydronic balancing

Smoothly adjustable setting of max. flow prevents over flow through terminal unit.

Installations without limits

Slim and compact shape simplifies installation, one side access to all functions simplifies operation.

Full control of the system

Exact flow measuring and unique diagnostic functions for ultimate energy savings and highly reliable system.

High reliability

AMETAL® and stainless steel guarantees high corrosion resistance and reduces the risk of leakage.

Technical description

Application:

Heating and cooling systems.

Functions:

Control
Pre-setting (max. flow)
Differential pressure control
Measuring (ΔH, T, q)
Isolation (for use during system maintenance – see also Leakage rate)

Dimensions:

DN 10-32

Pressure class:

PN 16

Differential pressure (ΔpV):

Max. differential pressure (ΔpVmax): 400 kPa = 4 bar
Min. differential pressure (ΔpVmin):
DN 10-20: 15 kPa = 0,15 bar
DN 25-32: 23 kPa = 0,23 bar
(Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software HySelect.)

ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.

ΔpVmin = The minimum recommended pressure drop over the valve, for proper differential pressure control.

Flow range:

The flow (qmax) can be set within the range:

DN 10: 21,5 - 120 l/h
DN 15 LF: 44 - 245 l/h
DN 15: 88 - 470 l/h
DN 20: 210 - 1150 l/h
DN 25: 370 - 2150 l/h
DN 32: 800 - 3700 l/h

qmax = l/h at each setting and fully open valve plug.

LF = Low flow

Temperature:

Max. working temperature: 90°C
Min. working temperature: -10°C

Media:

Water or neutral fluids, water-glycol mixtures (0-57%).

Lift:

4 mm

Leakage rate:

Leakage flow ≤ 0,01% of max. qmax (setting 10) and correct flow direction. (Class IV according to EN 60534-4).

Characteristics:

Linear, best suited for on/off control.

Material:

Valve body: AMETAL®
Valve insert: AMETAL®
Valve plug: Stainless steel
Spindle: Stainless steel
Spindle seal: EPDM O-ring
Δp insert: PPS
Membrane: EPDM and HNBR
Springs: Stainless steel
O-rings: EPDM


AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

Marking:

TA, IMI, PN 16, DN and flow direction arrow.
Grey handwheel: TA-COMPACT-P and DN. For low flow version also LF.

Connection:

Male thread according to ISO 228.

Connection to actuator:

M30x1.5

Actuators:

See separate technical documentation on EMO T.

Articles

Male thread

Threads according to ISO 228

DN
D
L
H1
H2
B
qmax [l/h]
Kg
EAN
Article No
10
G1/2
74
55
55
54
120
0,53
7318794013308
52 164-010
15 LF
G3/4
74
55
55
54
245
0,54
7318794025202
52 164-115
15
G3/4
74
55
55
54
470
0,54
7318794013407
52 164-015
20
G1
85
64
55
64
1150
0,69
7318794013506
52 164-020
25
G1 1/4
93
64
61
64
2150
0,79
7318794013605
52 164-025
32
G1 1/2
112
78
61
78
3700
1,5
7318794013704
52 164-032

LF = Low flow

*) Connection to actuator.

→ = Flow direction

Connections

With female thread

Threads according to ISO 228.

Thread length according to ISO 7-1.

Swivelling nut

Valve DN
D
D1
L*
EAN
Article No
10
G1/2
G3/8
21
7318794016804
52 163-010
15
G3/4
G1/2
21
7318794016903
52 163-015
20
G1
G3/4
23
7318794017009
52 163-020
25
G1 1/4
G1
23
7318794017108
52 163-025
32
G1 1/2
G1 1/4
31
7318794017207
52 163-032

*) Fitting length (from the gasket surface to the end of the connection).

With male thread

Threads according to ISO 7-1.
Swivelling nut

Valve DN
D
D1
L*
EAN
Article No
10
-
-
-
-
-
15
G3/4
R1/2
29
4024052516612
0601-02.350
20
G1
R3/4
32,5
4024052516810
0601-03.350
25
G1 1/4
R1
35
4024052517015
0601-04.350
32
G1 1/2
R1 1/4
38,5
4024052517213
0601-05.350

*) Fitting length (from the gasket surface to the end of the connection).

Welding connection

Swivelling nut

Valve DN
D
Pipe DN
L*
EAN
Article No
10
G1/2
10
30
7318792748400
52 009-010
15
G3/4
15
36
7318792748509
52 009-015
20
G1
20
40
7318792748608
52 009-020
25
G1 1/4
25
40
7318792748707
52 009-025
32
G1 1/2
32
40
7318792748806
52 009-032

*) Fitting length (from the gasket surface to the end of the connection).

Soldering connection

Swivelling nut

Valve DN
D
Pipe Ø
L*
EAN
Article No
10
G1/2
10
10
7318792749100
52 009-510
10
G1/2
12
11
7318792749209
52 009-512
15
G3/4
15
13
7318792749308
52 009-515
15
G3/4
16
13
7318792749407
52 009-516
20
G1
18
15
7318792749506
52 009-518
20
G1
22
18
7318792749605
52 009-522
25
G1 1/4
28
21
7318792749704
52 009-528
32
G1 1/2
35
26
7318792749803
52 009-535

*) Fitting length (from the gasket surface to the end of the connection).

Connection with smooth end

For connection with press coupling
Swivelling nut

Valve DN
D
Pipe Ø
L*
EAN
Article No
10
G1/2
12
35
7318793810502
52 009-312
15
G3/4
15
39
7318793810601
52 009-315
20
G1
18
44
7318793810700
52 009-318
20
G1
22
48
7318793810809
52 009-322
25
G1 1/4
28
53
7318793810908
52 009-328
32
G1 1/2
35
59
7318793811004
52 009-335

*) Fitting length (from the gasket surface to the end of the connection).

Compression connection

Support bushes shall be used, for more information see catalogue leaflet FPL.

Should not be used with PEX pipes.

Chrome plated

Valve DN
D
Pipe Ø
L**
EAN
Article No
10
G1/2
8
16
7318793620002
53 319-208
10
G1/2
10
17
7318793620101
53 319-210
10
G1/2
12
17
7318793620200
53 319-212
10
G1/2
15
20
7318793620309
53 319-215
10
G1/2
16
25
7318793620408
53 319-216
15
G3/4
15
27
7318793705006
53 319-615
15
G3/4
18
27
7318793705105
53 319-618
15
G3/4
22
27
7318793705204
53 319-622

**) Over all length L refers to unassembled coupling.

Accessories

Grip for setting wheel, optional

For better grip when presetting.
For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

Colour
EAN
Article No
Orange
7318794040502
52 164-950

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

EAN
Article No
Red
7318793961105
52 143-100

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
Prevents manipulation of setting.

EAN
Article No
7318794030206
52 164-100

Insulation

For heating/comfort cooling.
Material: EPP.
Fire class: E (EN 13501-1), B2 (DIN 4102).

Valve DN
L
H1
H2
D
EAN
Article No
10-15
100
61
71
84
7318794027404
52 164-901
20
118
67
79
90
7318794027503
52 164-902
25
127
71
84
104
7318794027602
52 164-903
32
154
85
99
124
7318794027701
52 164-904

Spindle extension

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
M30x1,5.

L
EAN
Article No
Plastic, black
30
4024052165018
2002-30.700

Name Document Type Download All
TA-COMPACT-P_EN_low.pdf Technical Specifications
EMO-T_EN_low.pdf Related Products
TA-COMPACT-P_instruction.pdf Installation Instructions
Decl_of_Conf_TA-COMPACT-P.pdf Legal Documents
TA-COMPACT-P_ED1504E.pdf Legal Documents
ED-19-01_CONNECTION_FEMALE_en.pdf Legal Documents
TA-COMPACT-P_brochure_2015-02.pdf Marketing Material
Name Document Type Download All
0601002350.eps Drawings
0601002350.gif Drawings
0601002350.jpg Drawings
240002350.eps Drawings
240002350.gif Drawings
240002350.jpg Drawings
52009710.eps Drawings
52009710.gif Drawings
52009710.jpg Drawings
52143100.eps Drawings
52143100.gif Drawings
52143100.jpg Drawings
52163xxx.eps Drawings
52163xxx.gif Drawings
52163xxx.jpg Drawings
52164901.eps Drawings
52164901.gif Drawings
52164901.jpg Drawings
52164950.eps Drawings
52164950.gif Drawings
52164950.jpg Drawings
52_009-010.eps Drawings
52_009-010.gif Drawings
52_009-010.jpg Drawings
52_009-312.eps Drawings
52_009-312.gif Drawings
52_009-312.jpg Drawings
52_009-510.eps Drawings
52_009-510.gif Drawings
52_009-510.jpg Drawings
53_319-208.eps Drawings
53_319-208.gif Drawings
53_319-208.jpg Drawings
TA-COMPACT-P_521640xx.eps Drawings
TA-COMPACT-P_521640xx.gif Drawings
TA-COMPACT-P_521640xx.jpg Drawings
TA-COMPACT-P_w_EMO-T.eps Drawings
TA-COMPACT-P_w_EMO-T.gif Drawings
TA-COMPACT-P_w_EMO-T.jpg Drawings
52164010_TA-COMPACT-P_DN10.dft 2D3d
52164010_TA-COMPACT-P_DN10.dwg 2D3d
52164010_TA-COMPACT-P_DN10.dxf 2D3d
52164010_TA-COMPACT-P_DN10.par 2D3d
52164010_TA-COMPACT-P_DN10.sat 2D3d
52164010_TA-COMPACT-P_DN10.stp 2D3d
52164010_TA-COMPACT-P_DN10.x_t 2D3d
52164015_TA-COMPACT-P_DN15.dft 2D3d
52164015_TA-COMPACT-P_DN15.dwg 2D3d
52164015_TA-COMPACT-P_DN15.dxf 2D3d
52164015_TA-COMPACT-P_DN15.par 2D3d
52164015_TA-COMPACT-P_DN15.sat 2D3d
52164015_TA-COMPACT-P_DN15.stp 2D3d
52164015_TA-COMPACT-P_DN15.x_t 2D3d
52164020_TA-COMPACT-P_DN20.dft 2D3d
52164020_TA-COMPACT-P_DN20.dwg 2D3d
52164020_TA-COMPACT-P_DN20.dxf 2D3d
52164020_TA-COMPACT-P_DN20.par 2D3d
52164020_TA-COMPACT-P_DN20.sat 2D3d
52164020_TA-COMPACT-P_DN20.stp 2D3d
52164020_TA-COMPACT-P_DN20.x_t 2D3d
52164025_TA-COMPACT-P_DN25.dft 2D3d
52164025_TA-COMPACT-P_DN25.dwg 2D3d
52164025_TA-COMPACT-P_DN25.dxf 2D3d
52164025_TA-COMPACT-P_DN25.par 2D3d
52164025_TA-COMPACT-P_DN25.sat 2D3d
52164025_TA-COMPACT-P_DN25.stp 2D3d
52164025_TA-COMPACT-P_DN25.x_t 2D3d
52164032_TA-COMPACT-P_DN32.dft 2D3d
52164032_TA-COMPACT-P_DN32.dwg 2D3d
52164032_TA-COMPACT-P_DN32.dxf 2D3d
52164032_TA-COMPACT-P_DN32.par 2D3d
52164032_TA-COMPACT-P_DN32.sat 2D3d
52164032_TA-COMPACT-P_DN32.stp 2D3d
52164032_TA-COMPACT-P_DN32.x_t 2D3d

Ask an Expert


product