We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Our unparalleled brand portfolio is built on more than 100 years of tradition and innovation. We provide a superb range of high-quality products and support services for every type of installation and customer.
From individual domestic installations to mammoth projects like the Burj Khalifa in Dubai – we can fulfil every customer’s and every sector’s needs.
Keen to understand the theory behind balancing HVAC systems for ultimate performance or searching for the latest industry insights and trends? Our Knowledge Hub is where you can find all you need to know.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimise every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Provide uniquely shaped EQM characteristic for best modulating control.
Uniquely shaped EQM characteristic provides an up to 6 times larger operating stroke than linear valves.
Automatic flow limitation when actuator is fully open protects entire system against overflows.
Flow and differential pressure measuring helps to reduce pump consumption and provides all necessary data for system diagnostics.
Heating and cooling systems.
Control EQM: DN 15-150 normal flowControl LIN: DN 100-150 high flowPre-setting (max. flow)Differential pressure controlMeasuring (ΔH, t, q)Isolation (for use during system maintenance – see "Leakage rate")
DN 15-50: PN 16DN 65-150: PN 16, PN 25
Max. differential pressure (ΔpVmax): DN 15-32: 600 kPa = 6 barDN 15-25: 400 kPa = 4 bar*DN 40-50: 400 kPa = 4 barDN 65-150: 800 kPa = 8 barMin. differential pressure (ΔpVmin): DN 15-20: 15 kPa = 0.15 barDN 25-32: 23 kPa = 0.23 barDN 40-150: 30 kPa = 0.30 barDN 100-125 HF: 55 kPa = 0.55 barDN 150 HF: 60 kPa = 0.60 bar(Valid for maximum setting, fully open. Other settings will require lower differential pressure, check with the software HySelect.)
ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.
ΔpVmin = The minimum recommended pressure drop over the valve, for proper differential pressure control.
*) With Δp insert in PPS.
The flow (qmax) can be set within the range:
DN 15: 92 - 480 l/hDN 20: 200 - 975 l/hDN 25: 340 - 1750 l/hDN 32: 720 - 3600 l/hDN 40: 1000 - 6500 l/hDN 50: 2150 - 11200 l/hDN 65: 4150 - 24100 l/hDN 80: 5850 - 37300 l/hDN 100: 11700 - 51700 l/hDN 100 HF: 18000 - 75900 l/hDN 125: 15000 - 77300 l/hDN 125 HF: 23300 - 127000 l/hDN 150: 26100 - 126000 l/hDN 150 HF: 38800 - 190000 l/h
qmax = l/h at each setting and fully open valve plug.
DN 15-32, DN 65-150:Max. working temperature: 120°CMin. working temperature: -20°CDN 15-25 with Δp insert in PPS, DN 40-50: Max. working temperature: 90°CMin. working temperature: -10°C
Water or neutral fluids, water-glycol mixtures (0-57%).
(For other media contact IMI Hydronic Engineering.)
DN 15-20: 4 mmDN 25-32: 6,5 mmDN 40-50: 15 mmDN 65-125: 20 mmDN 150: 30 mm
DN 15-32: >75DN 40-80: >125DN 100-150: >150DN 100-150 HF: >125
Leakage flow ≤ 0.01% of max. qmax (max. setting) and correct flow direction. (Class IV according to EN 60534-4).
Uniquely shaped EQM, best suited for modulating control.DN 100-150 HF: Linear.
DN 15-32:Valve body: AMETAL®Valve insert: AMETAL® and PPSValve plug: Brass CW724R (CuZn21Si3P)Spindle: Stainless steelSpindle seal: EPDM O-ringΔp insert: PPS and AMETAL® or PPSMembrane: EPDMSprings: Stainless steelO-rings: EPDMDN 40-50:Valve body: AMETAL®Valve insert: AMETAL®Valve plug: AMETAL® and PTFESpindle: Stainless steelSpindle seal: EPDM O-ringΔp insert: PPSMembrane: EPDMSprings: Stainless steelO-rings: EPDMDN 65-150:Valve body: Ductile iron EN-GJS-400Valve insert: Ductile iron EN-GJS-400 and brassValve plug: Stainless steel and EPDM O-ringValve seat: Stainless steelSpindle: Stainless steelSpindle seal: EPDMΔp insert: Ductile iron EN-GJS-400, stainless steel and brass.Membrane: Reinforced EPDMSprings: Stainless steelO-rings: EPDM
AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.
DN 32-50: Non treatedDN 65-150: Electrophoretic painting
Black identification ring on measuring point: TA-Modulator and DN.DN 15-32: TA, IMI, PN, DN and flow direction arrow. Grey setting wheel.DN 40-50: IMI TA, PN, DN, inch size, country of origin and flow direction arrow. Orange setting wheel.DN 65-150: IMI TA, DN, inch size, material and flow direction arrow. Label with technical specification, country of origin and CE. Orange setting wheel.
DN 15-50: Male thread according to ISO 228.DN 65-150: Flanges according to EN-1092-2, type 21. Face to face length according to EN 558, series 1.
DN 15-32: M30x1.5, pushDN 40-50: M30x1.5, push/pullDN 65-150: 2xM8, push/pull
DN 15-20: TA-Slider 160, EMO TM, EMO 3.DN 25-32: TA-Slider 160, TA-MC50-C*.DN 40-50: TA-Slider 500, TA-Slider 750*.DN 65-125: TA-Slider 750, TA-MC100 FSE/FSR (fail-safe).DN 100-125 HF: TA-Slider 750 ΔpV ≤ 4 bar, TA-Slider 1250 ΔpV ≤ 8 bar, TA-MC100 FSE/FSR (fail-safe).DN 150/DN 150 HF:TA-MC160**, TA-MC253 SE* (fail-safe).*) Adapter to be ordered separately, see "Adapters for actuators".**) Adapter delivered with the valve.
For more details on actuators, see separate technical leaflets.
The new uniquely shaped EQM characteristics provide highly precise temperature control. The valve is compatible with linear, proportional or 3-point actuators. A built-in differential pressure controller provides high control authority, control stability and automatic limitation of design flow. Measurement of flow and available pressure enables system optimisation and diagnostics.
Male threads according to ISO 228.
*) Connection to actuator.
→ = Flow direction
Flanges according to EN-1092-2, type 21.
Threads according to ISO 228.
Thread length according to ISO 7-1.
Threads according to ISO 7-1.Swivelling nut
Brass/Steel 1.0045 (EN 10025-2)
Brass/gunmetal CC491K (EN 1982)
For connection with press couplingSwivelling nut
Support bushes shall be used, for more information see catalogue leaflet FPL.
Should not be used with PEX pipes.
*) Fitting length (from the gasket surface to the end of the connection).
**) Over all length L refers to unassembled coupling.
For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).
For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.
Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.
Suitable for DN 15-32.
For heating/comfort cooling.Material: EPP.Fire class: DN 15-32: E (EN 13501-1), B2 (DIN 4102).DN 40-50: F (EN 13501-1), B3 (DIN 4102).
Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.
Can be installed without draining of the system.AMETAL®/Stainless steel/EPDM
For all dimensions.
Suitable when insulation is used.Stainless steel/EPDM/Brass.
IMI Hydronic Engineering Revit Plugin software allows users to export product models from MagiCAD database to Revit
Digitally configurable proportional push actuator – 160/200 N
Digitally configurable proportional push-pull actuator – 500/300 N
High performance proportional actuator – For modulating control
Digitally configurable proportional push-pull actuator – 750 N
High performance proportional actuator with fail-safe function – 1000 N