We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimise every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Ensure accurate balancing and flow reading.
Equipped with a digital read-out, the handwheel ensures accurate and straightforward balancing. Positive shut-off function for easy maintenance.
For simple, accurate balancing.
Dezincification resistant alloy that guarantees a longer valve lifetime and lowers the risk of leakage.
Heating and cooling systemsTap water systems
BalancingPre-settingMeasuringShut-offDraining (depending on valve type)
Max. working temperature: 120°C (intermittent 150°C) For higher temperatures (max. 150°C), see STAD-C. NOTE! DN 25-50 with smooth ends max. working temperature 120°C.Min. working temperature: -20°C
Water or neutral fluids, water-glycol mixtures (0-57%).
Valve body and bonnet: AMETAL®Sealing (body/bonnet): EPDM O-ringValve plug: AMETAL® Seat seal: EPDM O-ringSpindle: AMETAL®Slip washer: PTFESpindle seal: EPDM O-ringSpring: Stainless steelHandwheel: Polyamide and TPEMeasuring points: AMETAL®Sealings: EPDMCaps: Polyamide and TPEDraining: AMETAL®Sealing: EPDMGaskets: Fiber-based aramid Smooth ends:Nipple: AMETAL®Sealing (DN 25-50): EPDM O-ring
AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.
Body: IMI, TA, PN 25/400 WWP, DN and inch size. DN 50 also CE.Orange/grey handwheel: TA, STAD* and DN.
- Female thread according to ISO 228. Thread length according to ISO 7/1.- Male thread according to ISO 228. Thread length according to DIN 3546.- Smooth ends for connection with press coupling.
With female threads
STAD – PN 25
The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for use on the secondary side in heating and cooling systems, and tap water systems.
Female threads.Thread according to ISO 228. Thread length according to ISO 7/1.
→ = Flow direction
Kvs = m3/h at a pressure drop of 1 bar and fully open valve.
*) Can be connected to smooth pipes by KOMBI compression coupling.
NOTE: In softwares (HySelect, HyTools) and balancing instrument (TA-SCOPE) the STAD, PN 25 version, is named STAD*.
With male threads (STADA)
Male threads.Thread according to ISO 228. Thread length according to DIN 3546.
With smooth ends
Smooth ends for connection to press coupling.
Max 120°C (intermittent 150°C)AMETAL®/EPDM
Suitable when insulation is used.AMETAL®
Can be installed without draining of the system.AMETAL®/Stainless steel/EPDM
Swivelling nut Max 120°CBrass/Steel 1.0045 (EN 10025-2)
Swivelling nut Max 120°CBrass/gunmetal CC491K (EN 1982)
For connection with press couplingSwivelling nut Max 120°CBrass/AMETAL®
Support bushes shall be used, for more information see catalogue leaflet FPL.
Max.: 100°C(For more information see catalogue leaflet KOMBI.)
For heating/coolingCFC-free polyurethane. Covered with grey PVC.See catalogue leaflet "Prefab insulations" for complete details.
IMI Hydronic Engineering Revit Plugin software allows users to export product models from MagiCAD database to Revit
Compression coupling for metallic pipes
Insulation caps for heating and cooling system
Balancing valve – PN 16 and PN 25 – DN 20-400