We design and manufacture industry-leading hydronic products and solutions that give you control at every turn and help create energy-saving, cost-efficient HVAC installations.
Ensuring you have control at every turn is what we’re all about. We’ve developed a range of applications and software downloads to help you design, install and optimise every type of HVAC solution.
Download library We’ve created an extensive library of product-related technical documentation and a wide range of other useful information to help you get the most out of our globally-renowned products and solutions.
Built-in return temperature controller keeps the return temperature on a pre-set value and ensures high energy efficiency of the cooling system.
Overflows are limited by return temperature control.
Self-sealed measuring point for temperature measuring and monitoring.
Cooling systems with variable flow.
Installation in return pipe.
ControlReturn temperature controlTemperature measuringShut-off
200 kPa = 2 bar
Return temperature: 8°C - 18°CDelivery setting: 12°C
Max. working temperature: 50 °CMin. working temperature: -10 °C
Water or neutral fluids, water-glycol mixtures.
(For other media contact IMI Hydronic Engineering.)
Valve body: Corrosion resistant gunmetalO-rings: EPDM rubberValve seat gasket: EPDM rubberReturn spring: Stainless steelValve inserts: BrassSpindle: Niro-steel spindle with double O-ring sealing.Handwheel: ABS
TAH, PN 16, DN and flow direction arrow. Black protection cap.
See separate information on EMO T.
TA-COMPACT-T is an On/Off control valve with built-in return temperature controller that guarantees requested return temperature from terminal units in cooling systems. Correct return temperature increases energy efficiency of the entire system and helps to protect chillers against low temperature. Hydronic balancing by means of return temperature control limits overflows and provides energy savings. A measuring point makes temperature measuring possible.
Threads according to DIN EN 10226-1.
*) Connection to actuator.
Value H1 is at the bearing surface of the actuator.
Kvs = m3/h at a pressure drop of 1 bar and fully open valve.
for copper or precision steel pipes DIN EN 1057/10305-1/2.Female thread connection Rp1/2 – Rp3/4.Metal-to-metal joint.Brass nickel-plated.Support sleeves should be used for a pipe wall thickness of 0.8 – 1 mm. Follow the specifications of the pipe manufacturer.
for copper or precision steel pipe with a 1 mm wall thickness. Brass.
Please use the below link to browse and download IMI Hydronic Engineering BIM files for Revit. It requires a free registration.
High performance thermoelectric actuator – For ON/OFF or PWM control