Eclipse

IMI Heimeier
Compare
​​​​​​​ Thermostatic radiator valve with automatic flow limitation The thermostatic radiator valve Eclipse has a unique integrated flow limiter that eliminate over flows. The required flow rate can be adjusted directly at the valve with a twist. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary.

Integrated flow limiter

Eliminates over flows

Easy adjustment

Just a twist to reach design flow

Flow range from 10 to 150 l/h

For high flexibility

Perfect for renovation

Standard dimensions and easy flow sizing

All valve bodies with II+ marking can be retrofitted as Eclipse

i.e. V-exact II, Standard, Multilux, Multilux 4-Set

Technical description

Applications:

Heating and cooling systems.

Function:

Control
Flow limitation
Shut-off

Dimensions:

DN 10-20

Pressure class:

PN 10

Temperature:

Max. working temperature: 120°C, with protection cap or actuator 100°C, with press connection 110°C.
Min. working temperature: -10°C.

Flow range:

The flow can be stepless pre-set within the range: 10-150 l/h.
Delivery setting 150 l/h.
(Max. nominal flow qmN at 10 kPa concerning EN 215: 110 l/h)

Differential pressure (ΔpV):

Max. differential pressure:
60 kPa (<30 dB(A))
Min. differential pressure:
10 – 100 l/h = 10 kPa
100 – 150 l/h = 15 kPa

Materials:

Valve body: Corrosion resistant Gunmetal.
O-rings: EPDM rubber
Valve disc: EPDM rubber
Return spring: Stainless steel
Valve insert: Brass, PPS (polyphenylsulphide)
The complete thermostatic insert can be replaced using the HEIMEIER fitting tool without draining the system.
Spindle: Niro-steel spindle with double O-ring sealing.

Surface treatment:

Valve body and fittings are nickel-plated.

Marking:

THE, country code, flow direction arrow, DN and KEYMARK-Designation. II+ Designation.
Orange protection cap.

Standards:

Valves meet the following requirements:
– KEYMARK certified and tested to DIN EN 215.

Pipe connection:

The female-threaded version is designed for connection to threaded pipe, or in conjunction with compression fittings, to copper precision steel or multi-layer pipe (only DN 15). The male-threaded version, in conjunction with the appropriate compression fittings, permits connection to plastic pipe. Versions with Viega press connection (15 mm) with SC-Contur are suitable for copper, Viega Sanpress stainless-steel, and Prestabo steel pipe.

Connection to thermostatic head and actuator:

HEIMEIER M30x1,5

Articles

Angle

DN
D
d2
l3
l4
l5
H1
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
26
52
23,5
23,5
10-150
4024052929313
3931-01.000
15
Rp1/2
R1/2
29
58
27
23,5
10-150
4024052929412
3931-02.000
20
Rp3/4
R3/4
34
66
29
21,5
10-150
4024052930715
3931-03.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Angle

with reduced lengths.
Brass. Not suitable for compression fitting for multi layer pipes.

DN
D
d2
l3
l4
l5
H1
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
24
49
20
24
10-150
4024052932313
3461-01.000
15
Rp1/2
R1/2
26
53
23
23,5
10-150
4024052932412
3461-02.000
20
Rp3/4
R3/4
30
63
26
21,5
10-150
4024052932511
3461-03.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Angle

with Viega press connection 15 mm

DN
d2
l3
l4
H1
Flow range[l/h]
EAN
Article No
15
R1/2
29
58
23,5
10-150
4024052938018
3941-15.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Angle

with male thread G 3/4

DN
d1
d2
l3
l4
H1
Flow range[l/h]
EAN
Article No
15
G3/4
R1/2
29
58
21,5
10-150
4024052930616
3935-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Straight

DN
D
d2
l1
l2
H2
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
59
85
21,5
10-150
4024052929511
3932-01.000
15
Rp1/2
R1/2
66
95
21,5
10-150
4024052929610
3932-02.000
20
Rp3/4
R3/4
74
106
23,5
10-150
4024052929917
3932-03.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Straight

with reduced lengths.
Brass. Not suitable for compression fitting for multi layer pipes.

DN
D
d2
l1
l2
H2
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
50
76
22,5
10-150
4024052932610
3462-01.000
15
Rp1/2
R1/2
55
83
22,5
10-150
4024052932719
3462-02.000
20
Rp3/4
R3/4
65
97
22,5
10-150
4024052932818
3462-03.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Straight

with Viega press connection 15 mm

DN
d2
l1
H2
Flow range[l/h]
EAN
Article No
15
R1/2
66
21,5
10-150
4024052938117
3942-15.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Straight

with male thread G 3/4

DN
d1
d2
H2
Flow range[l/h]
EAN
Article No
15
G3/4
R1/2
21,5
10-150
4024052930814
3936-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Straight

with bended nipple

DN
D
d2
l1
H2
Flow range[l/h]
EAN
Article No
15
Rp1/2
R1/2
66
21,5
10-150
4024052933013
3944-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Axial

DN
D
d2
l3
l4
H1
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
26
52
31,5
10-150
4024052929115
3930-01.000
15
Rp1/2
R1/2
29
58
31,5
10-150
4024052929214
3930-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Axial

with reduced lengths.
Brass. Not suitable for compression fitting for multi layer pipes.

DN
D
d2
l3
l4
H1
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
24,5
50
34,5
10-150
4024052932016
3460-01.000
15
Rp1/2
R1/2
26
53
34,5
10-150
4024052932115
3460-02.000
20
Rp3/4
R3/4
30
63
34,5
10-150
4024052932214
3460-03.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Axial

with male thread G3/4

DN
d1
d2
l3
l4
H1
Flow range[l/h]
EAN
Article No
15
G3/4
R1/2
29
58
31,5
10-150
4024052930913
3937-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Double angle

Connection to radiator left

DN
D
d2
l3
l4
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
26
52
10-150
4024052931019
3933-01.000
15
Rp1/2
R1/2
29
58
10-150
4024052931217
3933-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Double angle

with male thread G 3/4
Connection to radiator left

DN
d1
d2
l3
l4
Flow range[l/h]
EAN
Article No
15
G3/4
R1/2
29
58
10-150
4024052931316
3938-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Double angle

Connection to radiator right

DN
D
d2
l3
l4
Flow range[l/h]
EAN
Article No
10
Rp3/8
R3/8
26
52
10-150
4024052931118
3934-01.000
15
Rp1/2
R1/2
29
58
10-150
4024052931415
3934-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Double angle

with male thread G 3/4
Connection to radiator right

DN
d1
d2
l3
l4
Flow range[l/h]
EAN
Article No
15
G3/4
R1/2
29
58
10-150
4024052931514
3939-02.000

*) SW1: DN 10 = 22 mm, DN 15 = 27 mm, DN 20 = 32 mm
SW2: DN 10 = 27 mm, DN 15 = 30 mm, DN 20 = 37 mm

Values H1 and H2 are at the bearing surface thermostatic head or actuator.

Accessories

Setting key

for Eclipse. Color orange.

EAN
Article No
4024052937714
3930-02.142

Compression fitting

for copper or precision steel pipe according to DIN EN 1057/10305-1/2.
Female thread connection Rp3/8 – Rp3/4.
Metal-to-metal joint.
Brass nickel-plated.
Support sleeves should be used for a pipe wall thickness of 0.8 – 1 mm. Follow the specifications of the pipe manufacturer.

Ø Pipe
DN
EAN
Article No
12
10 (3/8")
4024052174614
2201-12.351
14
15 (1/2")
4024052174713
2201-14.351
15
15 (1/2")
4024052175017
2201-15.351
16
15 (1/2")
4024052175116
2201-16.351
18
20 (3/4")
4024052175215
2201-18.351

Support sleeve

for copper or precision steel pipe with a 1 mm wall thickness.
Brass.

Ø Pipe
L
EAN
Article No
12
25,0
4024052127016
1300-12.170
15
26,0
4024052127917
1300-15.170
16
26,3
4024052128419
1300-16.170
18
26,8
4024052128815
1300-18.170

Compression fitting

for Alu/PEX multi-layer pipe according to DIN 16836.
Female thread connection Rp1/2.
Nickel-plated brass.

Ø Pipe
EAN
Article No
16 x 2
4024052138616
1335-16.351

Double connection fitting

For clamping plastic, copper, precision steel or multi-layer pipes.
Brass, nickel-plated.

L
EAN
Article No
G3/4 x R1/2
26
4024052308415
1321-12.083

Compression fitting

for copper or precision steel pipe according to DIN EN 1057/10305-1/2.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Metal-to-metal joint.
Brass nickel-plated.
With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.

Ø Pipe
EAN
Article No
12
4024052214211
3831-12.351
14
4024052214310
3831-14.351
15
4024052214617
3831-15.351
16
4024052214914
3831-16.351
18
4024052215218
3831-18.351

Compression fitting

for copper or precision steel pipe according to DIN EN 1057/10305-1/2 and stainless steel pipe.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Soft sealed, max. 95°C.
Nickel-plated brass.

Ø Pipe
EAN
Article No
15
4024052515851
1313-15.351
18
4024052516056
1313-18.351

Compression fitting

for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Nickel plated brass.

Ø Pipe
EAN
Article No
12x1,1
4024052136018
1315-12.351
14x2
4024052134618
1311-14.351
16x1,5
4024052136117
1315-16.351
16x2
4024052134816
1311-16.351
17x2
4024052134915
1311-17.351
18x2
4024052135110
1311-18.351
20x2
4024052135318
1311-20.351

Compression fitting

for Alu/PEX multi-layer pipe according to DIN 16836.
Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
Nickel-plated brass.

Ø Pipe
EAN
Article No
16x2
4024052137312
1331-16.351
18x2
4024052137411
1331-18.351

Compression fitting

for Alu/PEX multi-layer pipe according to DIN 16836.
Female thread connection Rp1/2.
Nickel-plated brass.

Ø Pipe
Article No
16x2
4024052138616
1335-16.351

Fitting tool

complete with case, box spanner and replacement seals, for replacing thermostatic inserts without draining off the heating system (for DN 10 to DN 20).

EAN
Article No
Fitting tool
4024052298914
9721-00.000
Replacement seals
4024052299010
9721-00.514

Measuring spindle for fitting tool

for differential pressure measurement at thermostatic valve bodies with TA-SCOPE balancing instrument.

EAN
Article No
4024052942114
9790-01.890

Replacement thermostatic insert

with automatic flow limiter for Eclipse.

EAN
Article No
4024052940912
3930-02.300

Other accessories, see catalogue leaflet "Accessories and spare parts for thermostatic radiator valves".

Download All
Name Document Type Download All
Eclipse_EN_lq.pdf Technical Specifications
Eclipse.pdf Installation Instructions
Eclipse_Insert_Ersatz-Umr.pdf Installation Instructions
Decl_of_Conf_Eclipse.pdf Legal Documents
Name Document Type Download All
3930-01-000.eps Drawings
3930-01-000.gif Drawings
3930-01-000.jpg Drawings
3930-02-300.eps Drawings
3930-02-300.gif Drawings
3930-02-300.jpg Drawings
393002142.eps Drawings
393002142.gif Drawings
393002142.jpg Drawings
3931-01-000.eps Drawings
3931-01-000.gif Drawings
3931-01-000.jpg Drawings
3932-01-000.eps Drawings
3932-01-000.gif Drawings
3932-01-000.jpg Drawings
3933-01-000.eps Drawings
3933-01-000.gif Drawings
3933-01-000.jpg Drawings
3934-02-000.eps Drawings
3934-02-000.gif Drawings
3934-02-000.jpg Drawings
3935-02-000.eps Drawings
3935-02-000.gif Drawings
3935-02-000.jpg Drawings
3936-02-000.eps Drawings
3936-02-000.gif Drawings
3936-02-000.jpg Drawings
3937-02-000.eps Drawings
3937-02-000.gif Drawings
3937-02-000.jpg Drawings
3938-02-000.eps Drawings
3938-02-000.gif Drawings
3938-02-000.jpg Drawings
3939-02-000.eps Drawings
3939-02-000.gif Drawings
3939-02-000.jpg Drawings
3941-15-000.eps Drawings
3941-15-000.gif Drawings
3941-15-000.jpg Drawings
3942-15-000.eps Drawings
3942-15-000.gif Drawings
3942-15-000.jpg Drawings
3944-02-000.eps Drawings
3944-02-000.gif Drawings
3944-02-000.jpg Drawings
9790-01-890.eps Drawings
9790-01-890.gif Drawings
9790-01-890.jpg Drawings
Key-for Eclipse.eps Drawings
Key-for Eclipse.gif Drawings
Key-for Eclipse.jpg Drawings
3930-01-000.dwg 2D3d
3930-01-000.stp 2D3d
3930-02-000.dwg 2D3d
3930-02-000.stp 2D3d
3931-01-000.dwg 2D3d
3931-01-000.stp 2D3d
3931-02-000.dwg 2D3d
3931-02-000.stp 2D3d
3931-03-000.dwg 2D3d
3931-03-000.stp 2D3d
3932-01-000.dwg 2D3d
3932-01-000.stp 2D3d
3932-02-000.dwg 2D3d
3932-02-000.stp 2D3d
3932-03-000.dwg 2D3d
3932-03-000.stp 2D3d
3933-01-000.dwg 2D3d
3933-01-000.stp 2D3d
3933-02-000.dwg 2D3d
3933-02-000.stp 2D3d
3934-01-000.dwg 2D3d
3934-01-000.stp 2D3d
3934-02-000.dwg 2D3d
3934-02-000.stp 2D3d
3935-02-000.dwg 2D3d
3935-02-000.stp 2D3d
3936-02-000.dwg 2D3d
3936-02-000.stp 2D3d
3937-02-000.dwg 2D3d
3937-02-000.stp 2D3d
3938-02-000.dwg 2D3d
3938-02-000.stp 2D3d
3939-02-000.dwg 2D3d
3939-02-000.stp 2D3d
3941-15-000.dwg 2D3d
3941-15-000.stp 2D3d
3942-15-000.dwg 2D3d
3942-15-000.stp 2D3d
3944-02-000.dwg 2D3d
3944-02-000.stp 2D3d

Ask an Expert


product