Hong Kong Polytechnic University Hong Kong Polytechnic University renovate their old HVAC system.

​​​​​
​​​

The challenge proposed by the Hong Kong government was to ensure that indoor temperature in air-conditioned buildings should be kept above 25.5° C to reduce environmental impact. As such, they set out to find a partner with the know-how and capability to enable precise temperature control with optimised efficiency. In turn, IMI Hydronic Engineering proved to be the partner with the perfect solution. 

Hong Kong Polytechnic University has an extensive campus with almost 30,000 students and approximately 1000 staff. The first phase of this HVAC system renovation project covers an area of nearly 10,000 m2.
The challenge
The university’s system had to be optimised to maintain a healthy and comfortable indoor climate with precise temperature control and a high level of efficiency. To begin, a complete system review and renovation of a representative 700 m2 test area was planned. This would demand both expertise and a close working relationship between the university and IMI Hydronic Engineering.
The solution
The key was to establish a reliable hydronic balance. In an unbalanced system, the terminals closest to the pump operate in overflow while those further away are in underflow. This is a typical issue in HVAC systems and results in varying indoor climates in different rooms. People then attempt to compensate for this discomfort by adjusting thermostat settings, which reduces efficiency and can compromise comfort.
The first step in reaching the optimal solution was to review the existing system. IMI Hydronic Engineering began with a thorough analysis, measuring differential pressure, flow and temperature inside the chilled water system. IMI Hydronic Engineering' own software, TA Select, was then used in the design phase for hydronic calculation and component selection.
The next step towards increased comfort was the installation of selected system components, mainly balancing valves together with differential pressure controllers. Commissioning support was provided, making sure that the solution would deliver from the outset and provide optimum comfort, energy savings and the fine degree of temperature control the university required. Owing to the specialist knowledge of IMI Hydronic Engineering, the TA CBI balancing instrument was used to help speed up commissioning and made the process more precise and more cost-efficient.
To verify the performance of the upgraded system, a test was carried out in a representative part of the system to measure both cooling performance and energy consumption. 
The outcome
By comparing both the old and renovated systems it became clear that the new system was able to deliver a superior level of comfort and increased energy-efficiency. As a result of the newly commissioned solution, the water flow remains stable, minimising temperature fluctuation and enables an excellent level of control. As such, the university expects a full payback on its initial investment in just 14 months.
TA Hydronics' innovative differential pressure control valves are now being used following the re-commissioning of this installation to regulate the pressure and flow of the hydronic systems. In the experimental phase, significant energy savings were achieved in the buildings of the Polytechnic that utilise this self-regulating climate control technology. - Professor Daniel W. T. Chan of the university’s Dept. of Building Services Engineering. 
As a result of the successful outcome, Hong Kong Polytechnic University will continue to optimise its campus HVAC systems in the coming years. The university aims to have a fully controllable indoor climate, optimising both energy efficiency and indoor comfort. In turn, the university trusts IMI Hydronic Engineering' specialist knowledge and expertise.
 ​
Facts
Project type Education & Research
Building Hong Kong Polytechnic University
Location Hong Kong
Gross area700 m2
Owner Hong Kong Polytechnic University
Products STAD, STAF, STAF-SG and STAP

Nyheter

Hjälp dina kunder att energieffektivisera VVS-systemen
01 oktober 2019
Ny renoveringshandbok
25 april 2019
Vanliga problem i värmesystem och hur de åtgärdas
03 april 2019
Beräkna tryckhållning med HyTools
20 mars 2019
Raditrim i ny version
11 mars 2019
ISH 2019
12 februari 2019
Hur du energieffektiviserar ditt VVS-system
07 februari 2019
Lägre energinota och bättre komfort med injustering
28 januari 2019
Ny teknisk artikel - Vad är ett hydroniskt Change oversystem
16 januari 2019
Vi ses på VA Tour 2019
15 januari 2019
Framtidssäkrade lösningar på Kongahälla center
13 november 2018
Utbildningar 2019
31 oktober 2018
Hong Kong Polytechnic University