Features & Benefits

    Hydraulic balancing by direct setting of the flow rate

    Manifold made of stainless steel

    Corrosion-resistant, durable and safe

    Thermostatic insert with double O-ring seal

    For durable and maintenance free operation

    Time and cost-saving commissioning solution

    Technical description

    Application:

    Floor heating systems

    Function:

    Individual room temperature control with actuator or thermostatic head
    Flow adjustment
    Shut-off
    Filling
    Draining
    Flushing
    Venting

    Pressure class:

    PN 6

    Flow range:

    The flow can be stepless pre-set within the range: 0-5 l/min

    Temperature:

    Max. working temperature: 70°C
    Min. working temperature: -5°C

    Material:

    Manifold:
    Stainless steel 1.4301
    Connection fittings: Nickel-plated brass.

    Thermostatic insert:
    Brass
    O-rings: EPDM
    Valve disc: EPDM
    Spring: stainless steel
    Thermostatic insert: Brass
    Spindle: Niro-steel spindle with double O-ring seal. The outer O-ring is replaceable under pressure.

    Flow meter:
    Heat-resistant plastic and stainless steel. EPDM seals.

    Filling, draining, flushing and venting device:
    Nickel-plated brass and plastic. EPDM seals.

    Marking:

    IMI Heimeier

    Marking:

    IMI Heimeier
    Black protection cap

    Connection kits:

    The following manifold connection kits are available:
    - Connection kit 1 with Globo ball valves.
    - Connection kit 2 with STAD balancing valve and Globo ball valve.
    - Connection kit 3 with Zeparo Vent air separator in supply pipe and Zeparo Dirt sludge separator in return.
    - Connection kit 4 with Globo ball valve, including spacer for heat meter in return and Globo ball valve with connection for direct measurement in supply and return pipe.
    - Connection kit 5 fixed value control station with high-efficiency pump for controlling the supply temperature.
    - Connection kit with ball valves, straight connection, including spacer for heat meter in return.
    - Connection kit with ball valves, angle connection, including spacer for heat meter in return.
    - Thermostatic mixing valve for radiant heating. Pump connection with ball valve.
    - Connection kit TA-COMPACT-P, vertical, for flow control.
    - Connection kit TA-COMPACT-P, horizontal, for flow control.
    - Connection kit TA-COMPACT-DP, vertical, for differential pressure control.
    - Connection kit TA-COMPACT-DP, horizontal, for differential pressure control.

    Pipe connection:

    Manifold with flat-sealing connection, 1" union nut.
    Heating circuit connection G3/4 adaptor with Eurocone suitable for compression fittings for plastic, copper, precision steel and multi-layer pipe.
    See also accessories.

    Manifold boxes:

    Manifold boxes available as flush-mounted version.

    Connection to thermostatic head and actuator:

    HEIMEIER M30x1,5

    Articles

    Connection kit with ball valves, straight connection, including spacer for heat meter in return. Ball valves with connection M10x1 for direct measurement in supply and return.

    DN
    Kvs
    EAN
    Article No
    20
    7
    5902276804830
    9339-04.830
    25
    7
    5902276804847
    9339-04.832

    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    Pump connection with ball valveTemperature 25 - 55 °C

    Thermostatic mixing valve for radiant heating

    Pump connection with ball valve
    Temperature 25 - 55 °C

    DN
    Kvs
    EAN
    Article No
    25
    3,2
    5902276805547
    9339-15.800

    *) 130 mm pump + 2x2 mm gasket

    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    For connection kit 3. Installation aid for return in manifold boxes.

    S-connection

    For connection kit 3. Installation aid for return in manifold boxes.

    EAN
    Article No
    4024052775712
    9339-00.362

    to replace by changing the closing cap.Temperatur range from 0 °C to 120 °C.

    Thermometer for Globo

    to replace by changing the closing cap.
    Temperatur range from 0 °C to 120 °C.

    EAN
    Article No
    Red
    4024052423316
    0600-00.380
    Blue
    4024052460618
    0600-01.380

    Pipe threads according to ISO 228.

    Connection kit TA-COMPACT-P, horizontal, for flow control, incl. pipe piece for heat meter

    Pipe threads according to ISO 228.

    DN *
    D
    d
    L1
    L2
    qmax
    [l/h]
    Kg
    EAN
    Article No
    15
    G3/4
    G1
    266
    150
    470
    1,9
    5902276898327
    326040-10401
    20
    G3/4
    G1
    266
    148
    1150
    2,0
    5902276898341
    326040-10501
    25 **
    G1
    G1
    298
    201
    2150
    3,0
    5902276898365
    326040-10601

    *) DN refers to TA-COMPACT-P

    **) DN 25, ball valve with connection M10x1

    qmax = l/h at each setting and fully open valve plug.

    Pipe threads according to ISO 228.

    Connection kit TA-COMPACT-DP, horizontal, for differential pressure control, incl. pipe piece for heat meter

    Pipe threads according to ISO 228.

    DN *
    D
    d
    L1
    L2
    q (at 10 kPa)
    [l/h]
    Kg
    EAN
    Article No
    15
    G3/4
    G1
    266
    150
    300
    1,9
    5902276898389
    326040-10403
    20
    G3/4
    G1
    266
    148
    840
    2,0
    5902276898402
    326040-10503
    25 **
    G1
    G1
    298
    201
    1500
    3,1
    5902276898426
    326040-10603

    *) DN refers to TA-COMPACT-DP

    **) DN 25, ball valve with connection M10x1

    Connection kit with ball valves, angle connection, including spacer for heat meter in return. Ball valves with connection M10x1 for direct measurement in supply and return.

    DN
    Kvs
    EAN
    Article No
    20
    4,6
    5902276804854
    9339-04.831
    25
    4,6
    5902276804861
    9339-04.833

    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    including measuring nipple for measuring differential pressure and flow rate.

    Connection kit 2 with STAD balancing valve and Globo ball valve, DN 20

    including measuring nipple for measuring differential pressure and flow rate.

    Kvs
    qmax
    [m3/h]
    EAN
    Article No
    5,28
    2,00
    4024052775316
    9339-02.800

    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    Connection kit 3 with Zeparo Vent air separator in supply and Zeparo Dirt sludge separator in return, DN 20

    Kvs
    qmax
    [m3/h]
    EAN
    Article No
    6,72
    1,25
    4024052775415
    9339-03.800

    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    Pipe threads according to ISO 228.

    Connection kit TA-COMPACT-DP, vertical, for differential pressure control, incl. pipe piece for heat meter

    Pipe threads according to ISO 228.

    DN *
    D
    d
    L1
    L2
    H
    q (at 10 kPa)
    [l/h]
    Kg
    EAN
    Article No
    15
    G3/4
    G1
    220
    182
    204
    300
    2,5
    5902276898372
    326040-10402
    20
    G3/4
    G1
    220
    180
    204
    840
    2,6
    5902276898396
    326040-10502
    25 **
    G1
    G1
    236
    209
    204
    1500
    3,4
    5902276898419
    326040-10602

    *) DN refers to TA-COMPACT-DP

    **) DN 25, ball valve with connection M10x1

    Pipe threads according to ISO 228.

    Connection kit TA-COMPACT-P, vertical, for flow control, incl. pipe piece for heat meter

    Pipe threads according to ISO 228.

    DN *
    D
    d
    L1
    L2
    H
    qmax
    [l/h]
    Kg
    EAN
    Article No
    15
    G3/4
    G1
    220
    182
    165
    470
    2,3
    5902276898310
    326040-10400
    20
    G3/4
    G1
    220
    180
    165
    1150
    2,5
    5902276898334
    326040-10500
    25 **
    G1
    G1
    236
    209
    165
    2150
    3,1
    5902276898358
    326040-10600

    *) DN refers to TA-COMPACT-P

    **) DN 25, ball valve with connection M10x1

    Dynalux underfloor heating circuit manifold

    Heating circuits
    EAN
    Article No
    2
    4024052594313
    9320-02.800
    3
    4024052594412
    9320-03.800
    4
    4024052594511
    9320-04.800
    5
    4024052594610
    9320-05.800
    6
    4024052594719
    9320-06.800
    7
    4024052594818
    9320-07.800
    8
    4024052598212
    9320-08.800
    9
    4024052951215
    9320-09.800
    10
    4024052951314
    9320-10.800
    11
    4024052951413
    9320-11.800
    12
    4024052951512
    9320-12.800

    with red end cap in supply and blue end cap in return.

    Connection kit 1 with Globo ball valves, DN 20

    with red end cap in supply and blue end cap in return.

    Kvs
    EAN
    Article No
    9,90
    4024052770816
    9339-01.800

    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    with high-efficiency pump Grundfos Alpha 2 15 - 60 130, thermostatic valve with contact sensor and electrical pipe contact safety switch 230V, 15A. Minimum installation depth manifold boxes: 125 mm.

    Connection kit 5, fixed value control station

    with high-efficiency pump Grundfos Alpha 2 15 - 60 130, thermostatic valve with contact sensor and electrical pipe contact safety switch 230V, 15A.
    Minimum installation depth manifold boxes: 125 mm.

    Setting range
    thermostatic head
    Setting range
    electrical pipe-contact sensor
    EAN
    Article No
    20 - 50°C
    10 - 90°C
    4024052775514
    9339-05.800

    Flush-mounted box, installation depth 110 - 150 mm.Note the minimum installation depth 125 mm for connection set 5!

    Manifold boxes

    Flush-mounted box, installation depth 110 - 150 mm.
    Note the minimum installation depth 125 mm for connection set 5!

    Size
    mm x mm
    EAN
    Article No
    1
    490 x 710
    4024052790616
    9339-80.800
    2
    575 x 710
    4024052790715
    9339-81.800
    3
    725 x 710
    4024052790814
    9339-82.800
    4
    875 x 710
    4024052790913
    9339-83.800
    5
    1.025 x 710
    4024052791019
    9339-84.800
    6
    1.175 x 710
    4024052791118
    9339-85.800

    Globo ball valve with connection G1/4 for direct measurement in supply and return.

    Connection kit 4 with Globo ball valve DN 20, including spacer for heat meter in return

    Globo ball valve with connection G1/4 for direct measurement in supply and return.

    Kvs
    EAN
    Article No
    9,90
    4024052775613
    9339-04.800

    Connection kit 4 can be mounted vertically using appropriate 1" elbows (not included in delivery). Manifold box sizes are then selected according to connection kit 1.

    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    Accessories

    electronic two-point room thermostat for time-dependent control of the room temperature, with analog 7-day automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact.

    Thermostat P with analog switch clock

    electronic two-point room thermostat for time-dependent control of the room temperature, with analog 7-day automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact.

    Type
    EAN
    Article No
    230 V
    4024052405718
    1932-00.500

    Replacement filling, draining, flushing and venting device 1/2”

    EAN
    Article No
    1/2"
    4024052989218
    9321-00.102

    for all HEIMEIER thermostatic valve bodies. With direct connection, white.

    Handwheel

    for all HEIMEIER thermostatic valve bodies. With direct connection, white.

    EAN
    Article No
    4024052323494
    1303-01.325

    for copper or precision steel pipe with a 1 mm wall thickness. Brass.

    Support sleeve

    for copper or precision steel pipe with a 1 mm wall thickness.
    Brass.

    Ø Pipe
    L
    EAN
    Article No
    12
    25,0
    4024052127016
    1300-12.170
    15
    26,0
    4024052127917
    1300-15.170
    16
    26,3
    4024052128419
    1300-16.170
    18
    26,8
    4024052128815
    1300-18.170

    Remote dial with built-in sensor. Liquid filled sensor.Setting range 0 °C to 27 °C.

    Thermostatic head F

    Remote dial with built-in sensor. Liquid filled sensor.
    Setting range 0 °C to 27 °C.

    Capillary tube length [m]
    EAN
    Article No
    2,00
    (6.56 ft)
    4024052191017
    2802-00.500
    5,00
    (16.4 ft)
    4024052191819
    2805-00.500
    10,00
    (32.81 ft)
    4024052192717
    2810-00.500

    for copper or precision steel pipe according to DIN EN 1057/10305-1/2. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Metal-to-metal joint. Nickel-plated brass. With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.

    Compression fitting

    for copper or precision steel pipe according to DIN EN 1057/10305-1/2.
    Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
    Metal-to-metal joint.
    Nickel-plated brass.
    With a pipe wall thickness of 0.8-1 mm insert supporting sleeves. Heed pipe manufacturer’s technical advice.

    Ø Pipe
    EAN
    Article No
    12
    4024052214211
    3831-12.351
    14
    4024052214310
    3831-14.351
    15
    4024052214617
    3831-15.351
    16
    4024052214914
    3831-16.351
    18
    4024052215218
    3831-18.351

    electronic two-point room thermostat for time-dependent control of the room temperature, with digital automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact. Menu-driven via four buttons.

    Thermostat P with digital switch clock

    electronic two-point room thermostat for time-dependent control of the room temperature, with digital automatic timer, pulse-width modulation output signal (PWM) and floating change-over contact. Menu-driven via four buttons.

    Type
    EAN
    Article No
    230 V
    4024052763610
    1932-01.500

    for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Nickel-plated brass.

    Compression fitting

    for plastic pipe according to DIN 4726, ISO 10508. PE-X: DIN 16892/16893, EN ISO 15875; PB: DIN 16968/16969.
    Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
    Nickel-plated brass.

    Ø Pipe
    EAN
    Article No
    12x1,1
    4024052136018
    1315-12.351
    14x2
    4024052134618
    1311-14.351
    16x1,5
    4024052136117
    1315-16.351
    16x2
    4024052134816
    1311-16.351
    17x2
    4024052134915
    1311-17.351
    18x2
    4024052135110
    1311-18.351
    20x2
    4024052135318
    1311-20.351

    For connecting to plastic, copper, precision steel or multi-layer pipes. For valves with male thread connection G3/4.Brass nickel-plated.

    Length adjustment fitting

    For connecting to plastic, copper, precision steel or multi-layer pipes.
    For valves with male thread connection G3/4.
    Brass nickel-plated.

    L
    EAN
    Article No
    G3/4 x G3/4
    25
    4024052298310
    9713-02.354
    G3/4 x G3/4
    50
    4024052298419
    9714-02.354

    from 03.2015

    Replacement thermostatic insert

    from 03.2015

    EAN
    Article No
    4024052968510
    9332-00.300

    This unit is used for wiring thermostats and electro-thermal actuators. The unit is suitable for underfloor heating and cooling (summer/winter operation). It is possible to switch over between heating and cooling via an external signal. The pump logic enables enery-optimised pump control. For up to 6 zones (rooms). Ready to plug in to a 230 V power socket.

    Distributor strip

    This unit is used for wiring thermostats and electro-thermal actuators. The unit is suitable for underfloor heating and cooling (summer/winter operation). It is possible to switch over between heating and cooling via an external signal. The pump logic enables enery-optimised pump control. For up to 6 zones (rooms). Ready to plug in to a 230 V power socket.

    EAN
    Article No
    4024052891115
    1612-00.000

    for Dynalux.

    Flow meter

    for Dynalux.

    EAN
    Article No
    4024052979714
    9321-00.101

    with thermal recirculation, controls the room temperature in connection with thermal actuators.

    Room thermostat

    with thermal recirculation, controls the room temperature in connection with thermal actuators.

    Type
    EAN
    Article No
    230 V
    Without temperature set-back
    4024052405916
    1936-00.500
    With temperature set-back
    4024052406111
    1938-00.500
    24 V
    Without temperature set-back
    4024052406012
    1946-00.500

    Two-point thermal actuator for floor heating systems. With position indicator in NC version. Suitable for all Heimeier thermostatic valve bodies. For technical data, please refer to the EMOtec datasheet.

    EMOtec

    Two-point thermal actuator for floor heating systems. With position indicator in NC version. Suitable for all Heimeier thermostatic valve bodies. For technical data, please refer to the EMOtec datasheet.

    Type
    EAN
    Article No
    230 V
    Currentless closed (NC)
    4024052460359
    1807-00.500
    Currentless open (NO)
    4024052490752
    1809-00.500
    24 V
    Currentless closed (NC)
    4024052460458
    1827-00.500
    Currentless open (NO)
    4024052491551
    1829-00.500

    For clamping plastic, copper, precision steel or multi-layer pipes.Brass, nickel-plated.

    Double connection fitting

    For clamping plastic, copper, precision steel or multi-layer pipes.
    Brass, nickel-plated.

    L
    EAN
    Article No
    G3/4 x R1/2
    26
    4024052308415
    1321-12.083

    for Alu/PEX multi-layer pipe according to DIN 16836. Connection male thread G3/4 according to DIN EN 16313 (Eurocone).Nickel-plated brass.

    Compression fitting

    for Alu/PEX multi-layer pipe according to DIN 16836.
    Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
    Nickel-plated brass.

    Ø Pipe
    EAN
    Article No
    16x2
    4024052137312
    1331-16.351

    Receives the room transmitters radio signals. With 8 or 6 output channels for the connection of the thermal actuators.

    Central unit

    Receives the room transmitters radio signals. With 8 or 6 output channels for the connection of the thermal actuators.

    Type
    EAN
    Article No
    6 output channels without time clock
    4024052557011
    1641-00.000
    8 output channels with time clock
    4024052557110
    1642-00.000

    battery-driven electronic Fuzzy controller, including battery.

    Room transmitter

    battery-driven electronic Fuzzy controller, including battery.

    Type
    EAN
    Article No
    with digital timer, incl. battery
    4024052763511
    1640-02.500
    without operating mode switch, incl. battery
    4024052556915
    1640-01.500
    with operating mode switch, incl. battery
    4024052556816
    1640-00.500

    Both sides for clamping plastic, copper, precision steel or multi-layer pipes.Brass nickel-plated.

    Double nipple

    Both sides for clamping plastic, copper, precision steel or multi-layer pipes.
    Brass nickel-plated.

    EAN
    Article No
    G3/4 x G3/4
    4024052136315
    1321-03.081

    Max. switching current auxiliary switch: Type 230 V: 5 (1) A; Type 24 V: 3 (1) A.Stroke: 4 mm.Connection to valve: HEIMEIER M30x1.5, with enclosed adapter.Adjusting force: 100 N.Cable length: 1 m fixed. Connection cable: 4 x 0,75 mm2

    Thermal actuator with auxiliary switch

    Max. switching current auxiliary switch: Type 230 V: 5 (1) A; Type 24 V: 3 (1) A.
    Stroke: 4 mm.
    Connection to valve: HEIMEIER M30x1.5, with enclosed adapter.
    Adjusting force: 100 N.
    Cable length: 1 m fixed.
    Connection cable: 4 x 0,75 mm2

    Type
    EAN
    Article No
    230 V
    Currentless closed (NC)
    4024052977819
    4968-03.000
    24 V
    Currentless closed (NC)
    4024052977918
    4988-03.000

    for copper or precision steel pipe according to DIN EN 1057/10305-1/2 and stainless steel pipe. Connection male thread G3/4 according to DIN EN 16313 (Eurocone). Soft sealed, max. 95°C. Nickel-plated brass.

    Compression fitting

    for copper or precision steel pipe according to DIN EN 1057/10305-1/2 and stainless steel pipe.
    Connection male thread G3/4 according to DIN EN 16313 (Eurocone).
    Soft sealed, max. 95°C.
    Nickel-plated brass.

    Ø Pipe
    EAN
    Article No
    15
    4024052515851
    1313-15.351
    18
    4024052516056
    1313-18.351

    9320-07-800

    Select a format Download

    9339-04-800

    Select a format Download

    9321-04-800-Dynalux

    Select a format Download

    9339-05-800-front

    Select a format Download

    9320-06-800

    Select a format Download

    9320-12-800

    Select a format Download

    9320-03-800

    Select a format Download

    9339-01-800

    Select a format Download

    9320-04-800

    Select a format Download

    9320-08-800

    Select a format Download

    9339-05-800

    Select a format Download

    9320-09-800

    Select a format Download

    4988-03-000

    Select a format Download

    9339-02-800

    Select a format Download

    9339-03-800

    Select a format Download

    4968-03-000

    Select a format Download

    9320-11-800

    Select a format Download

    9321-04-800-thermostatic_insert_cut

    Select a format Download

    9339-00-362

    Select a format Download

    Draining and venting device

    Select a format Download

    9332-00-300

    Select a format Download

    9321-04-800-flow indicator

    Select a format Download

    9321-00-102

    Select a format Download

    Drawings

    2D3D