Connection solutions for floor heating manifolds

Connection kit 5, fixed value control station

with high-efficiency pump Grundfos Alpha 2 15 - 60 130, thermostatic valve with contact sensor and electrical pipe contact safety switch 230V, 15A.
Minimum installation depth manifold boxes: 125 mm.

Connection kit TA-COMPACT-DP, vertical sets for differential pressure control, incl. pipe piece for heat meter (delivered unassembled)

Pipe threads according to ISO 228.

*) DN refers to TA-COMPACT-DP

**) DN 25, ball valve with connection M10x1

Connection kit TA-COMPACT-P, vertical sets for flow control, incl. pipe piece for heat meter (delivered unassembled)

Pipe threads according to ISO 228.

*) DN refers to TA-COMPACT-P

**) DN 25, ball valve with connection M10x1

q_max = l/h at each setting and fully open valve plug.

S-connection

For connection kit 3. Installation aid for return in manifold boxes.

Connection kit 1 with Globo ball valves, DN 20

with red end cap in supply and blue end cap in return.

Thermostatic mixing valve for radiant heating

Pump connection with ball valve
Temperature 25 - 55 °C

*) 130 mm pump + 2x2 mm gasket

Connection kit 4 with Globo ball valve DN 20, including spacer for heat meter in return

Globo ball valve with connection G1/4 for direct measurement in supply and return.

Connection kit 4 can be mounted vertically using appropriate 1" elbows (not included in delivery). Manifold box sizes are then selected according to connection kit 1.

Connection kit TA-COMPACT-P, horizontal sets for flow control, incl. pipe piece for heat meter (delivered unassembled)

Pipe threads according to ISO 228.

Connection kit with ball valves, straight connection, including spacer for heat meter in return. Ball valves with connection M10x1 for direct measurement in supply and return.

Connection kit with ball valves, angle connection, including spacer for heat meter in return. Ball valves with connection M10x1 for direct measurement in supply and return.

Kvs = m³/h at a pressure drop of 1 bar and fully open valve.

Connection kit 2 with STAD balancing valve and Globo ball valve, DN 20

including measuring nipple for measuring differential pressure and flow rate.

Connection kit TA-COMPACT-DP, horizontal sets for differential pressure control, incl. pipe piece for heat meter (delivered unassembled)

Pipe threads according to ISO 228.

Connection kit 3 with Zeparo Vent air separator in supply and Zeparo Dirt sludge separator in return, DN 20