Thermostatic head VK
With clamp connection for radiators with integrated valves
The thermostatic head VK has been designed to be mounted on radiators with integrated valves. The clamp connection with locking ring enables a direct connection to thermostatic inserts which do not have an M30x1.5 connecting thread and to Danfoss RA valves.
Features & Benefits
Direct connection to radiators with integrated valve or Danfoss RA valves with clamp connection
Liquid-filled thermostat with high pressure power and precision control
With 2 clips for marking, limiting or blocking
Symbols for basic setting and nighttime set back
Brief data including the most important settings
Technical Information
Applications area:
Heating systems
Functions:
Room temperature control.
Frost protection.
Markings indicate upper and lower temperature range; two energy saving clips can be used to limit settings.
Temperature range is limited on both ends and can be blocked using covered stop clips.
Control behavior:
Proportional controller without auxilliary energy. Liquid-filled thermostat. High pressure power, lowest hysteresis, optimal closing time.
Stable control behavior even in the case of small calculated p-band variation (<1K).
Nominal temperature range:
6 °C - 28 °C
Temperature:
Max. sensor temperature: 50°C (122°F)
Specific extension:
0.22 mm/K,
Valve stroke limiter
Material:
ABS, PA6.6GF30, brass, steel,
Liquid-filled thermostat.
Colour:
White RAL 9016
Marking:
Heimeier
Setting numbers 1-5.
Symbols for basic setting and nighttime reduction.
Brief data including the most important settings.
Setting indicators on the face of the head and markings designed for the visually impaired.
Rotation direction indicator.
Connection:
The thermostatic head VK has been designed to be mounted on radiators with integrated valves. The clamp connection with locking ring enables a direct connection to thermostatic inserts which do not have an M 30 x 1.5 connecting thread.
The thermostatic head VK can be mounted in several different positions, each at 90°.
Articles
Thermostatic head VK
Model | EAN | Article No |
Standard | 4024052298211 | 9710-24.500 |
with zero position (valve opens at approx. 0 °C or 32 °F) | 4024052493029 | 9711-24.500 |
with theft protection using 2 screws | 4024052541027 | 9710-40.500 |
*) at setting 3
The groove on the face of the thermostatic heads K, VK, WK and F serves to take up specially printed "partner clips". E-mail: [email protected]
for graduation cap of thermostatic head K and VK and for dismounting stop clips.
Removal device
for graduation cap of thermostatic head K and VK and for dismounting stop clips.
EAN | Article No |
4024052457410 | 6000-00.138 |
