M106 actuator for Globo
For Globo ball valves from DN 10 to DN 32
Easy installation by change of the Globo operating toggle. Application e.g. for On/Off-control in heating or drinking water systems. The actuator is also suitable for ball valves with heat insulation shell.
Features & Benefits
Easy subsequent installation
By change of the Globo operating toggle
Use for ON/OFF control with 230 V / 24 V
In heating or drinking water systems
Suitable for use with HEIMEIER insulation shells
The actuator is outside of the insulation
With handwheel
In case of manual emergency actuation
Technical Information
Applications area:
On/Off-control with Globo ball valves DN 10 - 32
Power supply:
230 V AC +6% / -10%
24 V AC +10% / -10%
Frequency:
50/60 Hz ±5%.
Power consumption:
3,5 VA
Input signal:
3-point
Ingress protection:
IP43
Protection class:
(according to EN 61140)
II (230V variant)
III (24V variant)
Temperature:
Medium temperature: max. 80°C
Ambient temperature 0°C to 50°C
Actuating time:
At 50 Hz/90°: 130s
End position switch-off:
Fixed at 90°
Angle of rotation:
90°
Operating mode:
S4-50% ED c/h 1200, EN 60034-1
Adjusting torque:
8 Nm
Cable:
1,5 m, three wire (0,5 mm2) with wire end ferrule
Articles
DN 10 to DN 32
M106 actuator for Globo ball valves
DN 10 to DN 32
Power supply | EAN | Article No |
230 V | 4024052902811 | 0600-00.700 |
24 V | 4024052040025 | 0600-01.700 |
Delivery without ball valve.
