Features & Benefits
Protected against theft
Flexural strength of the thermostatic head min. 1000 N
Infinitely variable temperature setting using a special key without removing the protection cap
Combining the minimalistic design with extra robustness even in the toughest environments e.g. in public buildings
Protection cap can be turned endlessly
for powerful and precise control
Room temperature control.
Proportional controller without auxilliary energy. Liquid-filled thermostat. High pressure power, lowest hysteresis, optimal closing time.
Stable control behavior even in the case of small calculated p-band variation (<1K).
Nominal temperature range:
8 °C to 26 °C (46 °F to 79 °F).
Max. sensor temperature: 50°C (122°F)
Valve stroke limiter
Control accuracy, CA value:
Water temperature influence:
Differential pressure influence:
PBTGF15, PA6.6 GF30, PPA GF60, PPO/PAGF20, brass, steel.
White RAL 9016
IMI HEIMEIER and KEYMARK symbol.
KEYMARK certified and tested according to EN 215. See also leaflet "Thermostatic Heads - General".
Designed to be mounted on all HEIMEIER thermostatic valve bodies and radiators with integrated valves which have an M30x1.5 thermostatic insert. In some cases a spindle extension is needed - see “Accessories”.
Protected against theft.
Flexural strength of the thermostatic head min. 1000 N. (Halo-B tested according to EN 215. The accessory angle connection 7300-00.700 or spindle extension 2201-10.700 were not in the scope of the test).
For public buildings
For public buildings
8°C - 26°C
Angle connection M30x1,5
For activating thermostatic head Halo-B and B (temperature setting).Also for V-exaktto end of 2011 / F-exakt thermostatic valve bodies, Regulux lockshield, Vekolux double connection fittings, and radiator air vents.
For activating thermostatic head Halo-B and B (temperature setting).
Also for V-exaktto end of 2011 / F-exakt thermostatic valve bodies, Regulux lockshield, Vekolux double connection fittings, and radiator air vents.
To be used when needed for some older radiator valves and some radiators with integrated valves.Needed in combination with angle connection art. No. 7300-00.700.
To be used when needed for some older radiator valves and some radiators with integrated valves.
Needed in combination with angle connection art. No. 7300-00.700.