TA-MC100
High performance proportional actuator – 225 lbf (1000 N)
High performance proportional actuators with automatic stroke adaptation which provide accurate modulating or 3-point control when used together with 2-way and 3-way control valves from IMI Hydronic Engineering.
Features & Benefits
Easy commissioning
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off which helps to reduce commissioning time and protect the valve and actuator from overloading.
Easy troubleshooting
Protected hand drive for a safe manual operation which enables easy troubleshooting.
Ease of service
The actuator housing cover is easy to remove (without screws). Parameters can be easily changed on site.
Technical Information
Functions:
Modulating or 3-point control.
Supply voltage:
24 VAC/VDC* ±10%
115 VAC +6%/-10%
Frequency 50-60 Hz ±5%
*) DC – Direct current flat voltage.
Power consumption:
24 V: 6 VA
115 V: 12 VA
Input signal:
0(2)-10 VDC, Ri ~77 kΩ
0(4)-20 mA, Ri ~510 Ω.
Signal direction and starting point adjustable by micro switches.
3-point control.
Output signal:
0-10 VDC, max. 8 mA, min. 1,2 kΩ.
Hysteresis:
0,15 or 0,5 V
Resolution:
Electric: 0.04 VDC
Mechanical: 0.0037 in
Control speed:
0.2, 0.26, 0.59 or 1.24 in/min
Adjusting force:
225 lbf
Operation mode:
S3 - 50% ED c/h 1200, EN 60034-1
End position switch-off:
Load-dependent
Temperature:
Max. ambient temperature: 140°F
Min. ambient temperature: 32°F
Ingress protection:
IP54
Protection class:
(according to EN 60730)
24 V: III
115 V: II
Stroke:
Max. 0.79 in
Automatic detection of the valve lift (stroke detection).
Electrical connection:
Actuator with screwed terminals.
Connection to valve:
Simple attachment to the valve by means of M8 screws.
For some valve types an adapter may be needed. Information on adapters included in valve datasheets.
Color:
Black body and red cover.
Marking:
IMI TA, CE, Article No, product name and technical specification.
Weight:
5.51 lb
Actuator variants:
- Position switch unit 1):
►2 switches (WE1/WE2), potential free, infinitely adjustable.
►Rated load: 8 A / 250 VAC, 8 A / 30 VDC.
►Switching voltage: max. 400 VAC, max. 125 VDC
- Ingress protection: IP65
- Output signal 1): X=0(4)...20 mA
- Adapter with coupling for external product
For variants and accessories please contact your local sales office.
1) Position switch unit and output signal 0(4)...20 mA not in combination.
Articles
TA-MC100
Supply voltage | Input signal | EAN | Article No |
24 VAC | 0(2)-10 VDC, 0(4)-20 mA, 3-point | 3831112511675 | 61 100-001 |
24 VDC* | 0(2)-10 VDC, 0(4)-20 mA, 3-point | 5902276804427 | 61 100-003 |
115 VAC | 0(2)-10 VDC, 0(4)-20 mA, 3-point | 5902276894350 | 61 100-302 |
*) DC – Direct current flat voltage.
For some valve types an adapter may be needed. Information about adapters are included in the valve datasheets.
For IP65 version: Add "IP" after the Article No., example 61 100-001IP
Stem heaters
TA-MC55, TA-MC55Y, TA-MC100, TA-MC160
Supply voltage | EAN | Article No | |
ACV 13 | 24 VAC | 3831112512108 | 68 013-015 |
General actuator accessories
Type | Description | EAN | Article No |
ACA 71 | Position Switch Unit (2 switches) | 5902276894169 | 67 071-100 |
ACA 76 | Output signal: 0(4)-20mA | 5902276894183 | 67 076-100 |
Note: Position switch unit and output signal 0(4)-20 mA not in combination.
For IP65 version: See "Articles".
