Features & Benefits

    Easy commissioning

    Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off helps to reduce commissioning time and protect the valve and actuator from overloading.

    Easy troubleshooting

    Protected hand drive for a safe manual operation which enables easy troubleshooting.

    Ease of service

    The actuator housing cover is easy to remove. Parameters can easily be changed on site.

    Technical description

    Functions:

    Modulating or 3-point control.

    Supply voltage:

    24 VAC/VDC* ±10%
    230 VAC +6%/-10%
    115 VAC +6%/-10%
    Frequency 50-60 Hz ±5%

    *) DC – Direct current flat voltage.

    Power consumption:

    24 V: 6 VA
    230 V: 12 VA
    115 V: 12 VA

    Input signal:

    0(2)-10 VDC, Ri ~77 kΩ
    0(4)-20 mA, Ri ~510 Ω.
    Signal direction and starting point adjustable by micro switches.
    3-point control.

    Output signal:

    0-10 VDC, max. 8 mA, min. 1,2 kΩ.

    Hysteresis:

    0,15 or 0,5 V

    Resolution:

    Electric: 0,04 VDC
    Mechanical: 0,095 mm

    Control speed:

    1.9, 4, 9, 12 s/mm

    Adjusting force:

    1000 N

    Operation mode:

    S3-50% ED c/h 1200, EN 60034-1

    End position switch-off:

    Load-dependent

    Temperature:

    Max. ambient temperature: 60°C
    Min. ambient temperature: 0°C

    Ingress protection:

    IP54

    Protection class:

    (according to EN 60730)
    24 V: III
    230 V: II
    115 V: II

    Stroke:

    Max. 20 mm

    Automatic detection of the valve lift (stroke detection).

    Electrical connection:

    Actuator with screwed terminals.

    Connection to valve:

    Simple attachment to the valve by means of M8 screws.
    For some valve types an adapter may be needed. Information on adapters included in valve datasheets.

    Colour:

    Black body and red cover.

    Marking:

    IMI TA, CE, Article No, product name and technical specification.

    Weight:

    2,5 kg

    Actuator variants:

    - Position switch unit 1):
    ►2 switches (WE1/WE2), potential free, infinitely adjustable.
    ►Rated load: 8 A / 250 VAC, 8 A / 30 VDC.
    ►Switching voltage: max. 400 VAC, max. 125 VDC
    - Ingress protection: IP65
    - Output signal 1): X=0(4)...20 mA
    - Adapter with coupling for external product


    For variants and accessories please contact IMI Hydronic Engineering.


    1) Position switch unit and output signal 0(4)...20 mA not in combination.

    Articles

    TA-MC100

    Supply voltage
    Input signal
    EAN
    Article No
    24 VAC
    0(2)-10 VDC, 0(4)-20 mA, 3-point
    3831112511675
    61 100-001
    24 VDC*
    0(2)-10 VDC, 0(4)-20 mA, 3-point
    61 100-003
    230 VAC
    0(2)-10 VDC, 0(4)-20 mA, 3-point
    3831112500235
    61 100-002
    115 VAC
    0(2)-10 VDC, 0(4)-20 mA, 3-point
    61 100-302

    *) DC – Direct current flat voltage.


    For some valve types an adapter may be needed. Information about adapters are included in the valve datasheets.


    For IP65 version: Add "IP" after the Article No., example 61 100-001IP

    Accessories

    Stem heaters

    TA-MC55, TA-MC55Y, TA-MC100, TA-MC160

    Supply voltage
    EAN
    Article No
    ACV 13
    24 VAC
    3831112512108
    68 013-015

    General actuator accessories

    EAN
    Article No
    ACA 71
    Position Switch Unit (2 switches)
    5902276894169
    67 071-100
    ACA 76
    Output signal: 0(4)-20mA
    5902276894183
    67 076-100

    Note: Position switch unit and output signal 0(4)-20 mA not in combination.


    For IP65 version:
    See "Articles".

    61100001

    Select a format Download

    TA-MC100_kat

    Select a format Download

    61100302

    Select a format Download

    61100002

    Select a format Download

    Drawings