Features & Benefits

    5 in 1 concept reduces costs

    The installation of a valve with 5 functions reduces the investment and the installation time.

    Saves energy and money

    Balanced and pressure independent circuits protects systems against over flows and too high energy consumption.

    Zone control

    Time controlled circuits can save up to 20% energy.

    Noise protection

    Differential pressure control protects control valves from too high differential pressure.

    Technical description

    Application:

    Heating and cooling systems.

    Functions:

    Pre-setting (max. flow)
    Differential pressure control
    Control
    Measuring (ΔH, T, q)
    Isolation (for use during system maintenance – see "Leakage rate")

    Dimensions:

    DN 10-25

    Pressure class:

    PN 16

    Differential pressure (ΔH):

    Max. differential pressure (ΔHmax):
    400 kPa = 4 bar
    Min. differential pressure (ΔHmin):
    DN 10: 20 kPa = 0,20 bar
    DN 15: 18 kPa = 0,18 bar
    DN 20: 21 kPa = 0,21 bar
    DN 25: 25 kPa = 0,25 bar
    (Valid for the most demanding settings. Other settings will require a lower ΔH. Check with graphs under "Sizing" or software HySelect.)

    ΔHmax = The maximum allowed pressure drop over the circuit, to fulfill all stated performances.

    ΔHmin = The minimum needed pressure drop over the circuit, for proper differential pressure control.

    Setting range:

    Indication of recommended setting range. For more detailed information see "Sizing".

    (ΔpL 10 kPa)
    DN 10: 16-71 l/h
    DN 15: 60-300 l/h
    DN 20: 160-840 l/h
    DN 25: 280-1500 l/h

    Temperature:

    Max. working temperature: 120°C
    Min. working temperature: -20°C

    Media:

    Water or neutral fluids, water-glycol mixtures (0-57%).

    Lift:

    4 mm

    Leakage rate:

    Leakage flow ≤ 0,01% of max. recommended flow (setting 10) in correct flow direction.
    (Class IV according to EN 60534-4).

    Characteristics:

    Linear, best suited for on/off control.

    Material:

    Valve body: AMETAL®
    Valve insert: AMETAL®
    Valve plug: Brass CW724R (CuZn21Si3P)
    Spindle: Stainless steel
    Spindle seal: EPDM O-ring
    Δp insert: AMETAL®, PPS (polyphenylsulphide)
    Membrane: EPDM and HNBR
    Springs: Stainless steel
    O-rings: EPDM


    AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

    Marking:

    TA, IMI, PN 16, DN and flow direction arrow.
    Grey handwheel: TA-COMPACT-DP and DN.

    Connection:

    External threads according to ISO 228.

    Connection to actuator:

    M30x1.5

    Actuators:

    See separate technical documentation on EMO T.

    Articles

    Threads according to ISO 228.

    Male thread

    Threads according to ISO 228.

    1 m capillary pipe included.

    DN
    d
    L
    H1
    H2
    W
    Kg
    EAN
    Article No
    10
    G1/2
    74
    55
    55
    54
    0,57
    7318794040205
    52 164-210
    15
    G3/4
    74
    55
    55
    54
    0,60
    7318794025608
    52 164-215
    20
    G1
    85
    64
    55
    64
    0,75
    7318794025707
    52 164-220
    25
    G1 1/4
    93
    64
    61
    64
    0,90
    7318794025806
    52 164-225

    *) Connection to actuator.

    → = Flow direction

    Connections

    Swivelling nut.

    Soldering connection

    Swivelling nut.

    Brass/gunmetal CC491K (EN 1982)

    Valve DN
    D
    Pipe Ø
    L*
    EAN
    Article No
    10
    G1/2
    10
    10
    7318792749100
    52 009-510
    10
    G1/2
    12
    11
    7318792749209
    52 009-512
    15
    G3/4
    15
    13
    7318792749308
    52 009-515
    15
    G3/4
    16
    13
    7318792749407
    52 009-516
    20
    G1
    18
    15
    7318792749506
    52 009-518
    20
    G1
    22
    18
    7318792749605
    52 009-522
    25
    G1 1/4
    28
    21
    7318792749704
    52 009-528

    *) Fitting length (from the gasket surface to the end of the connection).

    For connection with press coupling. Swivelling nut.

    Connection with smooth end

    For connection with press coupling.
    Swivelling nut.

    Brass/AMETAL®

    Valve DN
    D
    Pipe Ø
    L*
    EAN
    Article No
    10
    G1/2
    12
    35
    7318793810502
    52 009-312
    15
    G3/4
    15
    39
    7318793810601
    52 009-315
    20
    G1
    18
    44
    7318793810700
    52 009-318
    20
    G1
    22
    48
    7318793810809
    52 009-322
    25
    G1 1/4
    28
    53
    7318793810908
    52 009-328

    *) Fitting length (from the gasket surface to the end of the connection).

    Swivelling nut.

    Welding connection

    Swivelling nut.

    Brass/Steel 1.0045 (EN 10025-2)

    Valve DN
    D
    Pipe DN
    L*
    EAN
    Article No
    10
    G1/2
    10
    30
    7318792748400
    52 009-010
    15
    G3/4
    15
    36
    7318792748509
    52 009-015
    20
    G1
    20
    40
    7318792748608
    52 009-020
    25
    G1 1/4
    25
    40
    7318792748707
    52 009-025

    *) Fitting length (from the gasket surface to the end of the connection).

    Threads according to ISO 7-1. Swivelling nut.

    With External thread

    Threads according to ISO 7-1.
    Swivelling nut.

    Brass

    Valve DN
    D
    D1
    L*
    EAN
    Article No
    10
    -
    -
    -
    -
    -
    15
    G3/4
    R1/2
    29
    4024052516612
    0601-02.350
    20
    G1
    R3/4
    32,5
    4024052516810
    0601-03.350
    25
    G1 1/4
    R1
    35
    4024052517015
    0601-04.350

    *) Fitting length (from the gasket surface to the end of the connection).

    Compression connection

    Support bushes shall be used, for more information see catalogue leaflet FPL.

    Should not be used with PEX pipes.

    Brass/AMETAL®

    Chrome plated

    Valve DN
    D
    Pipe Ø
    L**
    EAN
    Article No
    10
    G1/2
    8
    16
    7318793620002
    53 319-208
    10
    G1/2
    10
    17
    7318793620101
    53 319-210
    10
    G1/2
    12
    17
    7318793620200
    53 319-212
    10
    G1/2
    15
    20
    7318793620309
    53 319-215
    10
    G1/2
    16
    25
    7318793620408
    53 319-216
    15
    G3/4
    15
    27
    7318793705006
    53 319-615
    15
    G3/4
    18
    27
    7318793705105
    53 319-618
    15
    G3/4
    22
    27
    7318793705204
    53 319-622

    **) Over all length L refers to unassembled coupling.

    Threads according to ISO 228.

    With internal thread

    Threads according to ISO 228.

    Thread length according to ISO 7-1.

    Swivelling nut.

    Brass/AMETAL®

    Valve DN
    D
    D1
    L*
    EAN
    Article No
    10
    G1/2
    G3/8
    21
    7318794016804
    52 163-010
    15
    G3/4
    G1/2
    21
    7318794016903
    52 163-015
    20
    G1
    G3/4
    23
    7318794017009
    52 163-020
    25
    G1 1/4
    G1
    23
    7318794017108
    52 163-025

    *) Fitting length (from the gasket surface to the end of the connection).

    Accessories

    For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 10-32).

    Grip for setting wheel, optional

    For better grip when presetting.
    For TA-COMPACT-P/-DP and TA-Modulator (DN 10-32).

    Colour
    EAN
    Article No
    Orange
    7318794040502
    52 164-950

    Complete with connections for 6 mm pipe

    Extension kit for capillary pipe

    Complete with connections for 6 mm pipe

    EAN
    Article No
    7318793781505
    52 265-212

    For TA-COMPACT-P/-DP, TA-Modulator (DN 10-20), TBV-C/-CM.

    Protection cap

    For TA-COMPACT-P/-DP, TA-Modulator (DN 10-20), TBV-C/-CM.

    Colour
    EAN
    Article No
    Red
    7318793961105
    52 143-100

    Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

    Tamper proof cover

    Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
    Prevents manipulation of setting.

    EAN
    Article No
    7318794030206
    52 164-100

    For heating/comfort cooling.Material: EPP.Fire class: E (EN 13501-1), B2 (DIN 4102).

    Insulation

    For heating/comfort cooling.
    Material: EPP.
    Fire class: E (EN 13501-1), B2 (DIN 4102).

    The insulation must be manually adjusted for the capillary pipe.

    Valve DN
    L
    H1
    H2
    D
    EAN
    Article No
    10-15
    100
    61
    71
    84
    7318794027404
    52 164-901
    20
    118
    67
    79
    90
    7318794027503
    52 164-902
    25
    127
    71
    84
    104
    7318794027602
    52 164-903

    For capillary pipe with G1/16 connection.

    Transition nipple

    For capillary pipe with G1/16 connection.

    For connection to TA valves with drain.

    d
    EAN
    Article No
    G1/2
    7318793660206
    52 179-981
    G3/4
    7318793660305
    52 179-986

    Capillary pipe

    1 pc included in TA-COMPACT-DP.

    L
    EAN
    Article No
    1 m
    7318793661500
    52 265-301

    For connection of capillary pipe while permitting simultaneous use of our balancing instrument.

    Measuring point, two-way

    For connection of capillary pipe while permitting simultaneous use of our balancing instrument.

    EAN
    Article No
    7318793784100
    52 179-200

    For capillary pipe with G1/16 connection.

    Transition nipple

    For capillary pipe with G1/16 connection.

    EAN
    Article No
    R1/4xG1/16
    7318794025509
    52 265-306

    Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

    Spindle extension

    Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
    M30x1,5.

    Type
    L
    EAN
    Article No
    Plastic, black
    30
    4024052165018
    2002-30.700
    Additional equipment

    Female threads.Thread according to ISO 228. Thread length according to ISO 7/1.

    With drain

    Female threads.
    Thread according to ISO 228. Thread length according to ISO 7/1.

    DN
    D
    L
    H
    Kvs
    Kg
    EAN
    Article No
    d = G3/4
    15*
    G1/2
    84
    100
    3,5
    0,60
    5902276896569
    52 849-615
    20*
    G3/4
    94
    100
    6,8
    0,66
    5902276896576
    52 849-620
    25
    G1
    105
    105
    9,8
    0,86
    5902276896583
    52 849-625
    d = G1/2
    15*
    G1/2
    84
    100
    3,5
    0,60
    5902276896507
    52 849-215
    20*
    G3/4
    94
    100
    6,8
    0,66
    5902276896514
    52 849-220
    25
    G1
    105
    105
    9,8
    0,86
    5902276896521
    52 849-225

    → = Flow direction


    Kvs = m3/h at a pressure drop of 1 bar and fully open valve.

    *) Can be connected to smooth pipes by KOMBI compression coupling.

    Max.: 100°CThrust screw: AMETAL® or brass, nickel plated.Cone: Brass(For more information see catalogue leaflet KOMBI.)

    KOMBI compression coupling

    Max.: 100°C
    Thrust screw: AMETAL® or brass, nickel plated.
    Cone: Brass
    (For more information see catalogue leaflet KOMBI.)

    Male pipe threads
    on thrust screw
    For pipes,
    diameter
    EAN
    Article No
    G1/2
    10
    7318792874901
    53 235-109
    G1/2
    12
    7318792875007
    53 235-111
    G1/2
    14
    7318792875106
    53 235-112
    G1/2
    15
    7318792875205
    53 235-113
    G1/2
    16
    7318792875304
    53 235-114
    G3/4
    15
    7318792875403
    53 235-117
    G3/4
    18
    7318792875601
    53 235-121
    G3/4
    22
    7318792875700
    53 235-123

    For capillary pipe with G1/16 connection.

    Transition nipple

    For capillary pipe with G1/16 connection.

    For connection to TA valves with drain.

    d
    EAN
    Article No
    G1/2
    7318793660206
    52 179-981
    G3/4
    7318793660305
    52 179-986

    52164950

    Select a format Download

    52265306

    Select a format Download

    52164100

    Select a format Download

    52143100

    Select a format Download

    52179981

    Select a format Download

    52163015

    Select a format Download

    TA-COMPACT-DP_w_pipe

    Select a format Download

    TA-COMPACT-DP_persp

    Select a format Download

    53319xxx

    Select a format Download

    52265212

    Select a format Download

    52265301

    Select a format Download

    52009515

    Select a format Download

    060102350

    Select a format Download

    520090xx

    Select a format Download

    520093xx

    Select a format Download

    52164210

    Select a format Download

    52759219

    Select a format Download

    52164225

    Select a format Download

    TA-COMPACT-DP

    Select a format Download

    52164220

    Select a format Download

    TA-COMPACT-DP_w_pipe_persp

    Select a format Download

    52164215

    Select a format Download

    Drawings

    2D3D