TA-6-way valve

6-way valve for change-over systems

The 6-way valve solution enables various control set-ups for heating and cooling in sequence on one terminal unit. Provides automatically adopted settings of maximum flows for heating and cooling modes together with TA-Modulator and TA-Slider 160 CO, TA-Slider 160 KNX R24 or TA-Slider 160 BACnet/Modbus CO.

Features & Benefits

Easy commissioning and balancing

Provides automatically adopted settings of maximum flows for heating and cooling mode together with TA-Modulator and TA-Slider 160 CO, TA-Slider 160 KNX R24 or TA-Slider 160 BACnet/Modbus CO.

Precise flow control

Provides uniquely shaped EQM characteristic for best modulating control together with TA-Modulator.

Easy troubleshooting

Provides flow and differential pressure measuring for system diagnostic and pump optimization together with TA-Modulator.

Compact installation

Saves space by using one terminal unit for heating and cooling.

Technical Information

Technical description

Application:

Heating and cooling systems.

(Change-over system)

Functions:

Control

Dimensions:

DN 15-20

Pressure class:

PN 16

Max. differential pressure (ΔpV):

200 kPa

Temperature:

Max. working temperature: 120°C
Min. working temperature: -10°C

Media:

Water or neutral fluids, water-glycol mixtures (0-57%).

Leakage rate:

Level A (EN 12266-1/12 - P12)

Characteristics:

Linear, best suited for on/off control.

Material:

Valve body: Brass CW602N CuZn36Pb2As (322203-13001: Brass CW617N CuZn40Pb2)
Balls: Brass CW614N CuZn39Pb3
Spindles: Brass CW614N CuZn39Pb3
Seats: PTFE
O-rings: EPDM (Perox)

Surface treatment:

Valve body: Nickel-plated or non-plated (raw finish).
Spindles and balls: Nickel-plated.

Marking:

IMI TA, PN, DN.

Connection:

Male thread according to ISO 228.
- Eurocone
- Flat faced ends
Female thread according to ISO 228.

Connection to actuator:

F03 and F04 according to EN ISO 5211.

Angle of rotation:

90°

Actuators:

TA-M106, TA-M106 CO, TA-MC106Y

Technical description – Actuator

Functions:

Proportional control
3-point control
Manual override

Supply voltage:

TA-M106/24: 24 VAC +6% -10%
TA-M106/230: 230 VAC +6% -10%
TA-M106 CO: 24 VAC +6% -10%
TA-MC106Y: 24 VAC ±10%

Frequency:

50/60 Hz ±5%.

Power consumption:

TA-M106, TA-M106 CO: 3.5 VA
TA-MC106Y: 3.0 VA

Input signal:

TA-M106, TA-M106 CO: 3-point
TA-MC106Y: 0(2)-10 VDC, Ri 77 kΩ. (0-10, 10-0, 2-10, 10-2)

Output signal:

TA-MC106Y: 0-10 VDC (0-10, 10-0), max. 8 mA, min. 1.2 kΩ.

Actuating time:

(at 50 Hz/90°)
TA-M106, TA-M106 CO: 130 s
TA-MC106Y: 150/80 s

Adjusting torque:

8 Nm

Temperature:

Medium temperature: max. 80°C
Operating environment: 0°C - +50°C

Ingress protection:

IP43

Protection class:

EN 60730
24 VAC: III
230 VAC: II

End position switch-off:

Fixed at 90°

Cable:

1,5 m, three wire (0,5 mm2) with wire end ferrule.
CO version: With connector to actuator TA-Slider 160 CO or TA-Slider 160 BACnet/Modbus CO instead of wire end ferrules.

Colour:

Orange RAL 2011, grey RAL 7043.

Marking:

Label: IMI TA, CE, product name and technical specification.

Connection to valve:

F04 according to EN ISO 5211.

Angle of rotation:

90°

Articles

TA-M106/TA-M106 CO/TA-MC106Y actuators

	Supply voltage	Input signal	Kg	EAN	Article No
TA-M106	24 VAC	3-point	0,5	5902276884016	322204-29000
TA-M106	230 VAC	3-point	0,5	5902276884023	322204-29001
TA-M106 CO	24 VAC	3-point	0,5	5901688829639	322042-90000
TA-MC106Y	24 VAC	0(2)-10 VDC	0,5	5902276884030	322204-29002

TA-M106/TA-M106 CO/TA-MC106Y actuators

	Supply voltage	Input signal	Kg	EAN	Article No
TA-M106	24 VAC	3-point	0,5	5902276884016	322204-29000
TA-M106	230 VAC	3-point	0,5	5902276884023	322204-29001
TA-M106 CO	24 VAC	3-point	0,5	5901688829639	322042-90000
TA-MC106Y	24 VAC	0(2)-10 VDC	0,5	5902276884030	322204-29002

Thread according to ISO 228.

Male threads

Thread according to ISO 228.

Nickel-plated

DN	D	L1	L2	H	H1	H2	h	W	Kvs	Kg	EAN	Article No
Flat faced ends
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603306090	322203-13000
Eurocone
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603306113	322203-13001

Non-plated (raw finish)

DN	D	L1	L2	H	H1	H2	h	W	Kvs	Kg	EAN	Article No
Flat faced ends
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603308186	322031-30402
15*	G3/4	47	39	141	37	60	9,4	41	2,80	1,9	8016603309466	322031-30500
Eurocone
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603308162	322031-30403
15*	G3/4	47	42,5	141	37	60	9,4	41	2,80	1,9	8016603309411	322031-30501

Valve and actuator to be ordered and delivered separately.

*) Body marked with DN 20 (connections DN 15).

Male threads

Thread according to ISO 228.

Male threads

Thread according to ISO 228.

Nickel-plated

DN	D	L1	L2	H	H1	H2	h	W	Kvs	Kg	EAN	Article No
Flat faced ends
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603306090	322203-13000
Eurocone
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603306113	322203-13001

Non-plated (raw finish)

DN	D	L1	L2	H	H1	H2	h	W	Kvs	Kg	EAN	Article No
Flat faced ends
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603308186	322031-30402
15*	G3/4	47	39	141	37	60	9,4	41	2,80	1,9	8016603309466	322031-30500
Eurocone
15	G3/4	42	34	117	29	50	9,4	35	1,25	1,0	8016603308162	322031-30403
15*	G3/4	47	42,5	141	37	60	9,4	41	2,80	1,9	8016603309411	322031-30501

Valve and actuator to be ordered and delivered separately.

*) Body marked with DN 20 (connections DN 15).

Thread according to ISO 228.

Female threads

Thread according to ISO 228.

Non-plated (raw finish)

DN	D	L1	L2	H	H1	H2	h	W	Kvs	Kg	EAN	Article No
20	G3/4	47,5	47,5	141	37	60	9,4	40	4,00	2,0	8016603310219	322031-30504

Valve and actuator to be ordered and delivered separately.

Female threads

Thread according to ISO 228.

Female threads

Thread according to ISO 228.

Non-plated (raw finish)

DN	D	L1	L2	H	H1	H2	h	W	Kvs	Kg	EAN	Article No
20	G3/4	47,5	47,5	141	37	60	9,4	40	4,00	2,0	8016603310219	322031-30504

Valve and actuator to be ordered and delivered separately.

Connections – For flat faced ends

For connection with press coupling. Swivelling nut.

Connection with smooth end

For connection with press coupling.
Swivelling nut.

Valve DN	D	Pipe Ø	L*	EAN	Article No
15	G3/4	15	39	7318793810601	52 009-315

Connection with smooth end

For connection with press coupling. Swivelling nut.

Connection with smooth end

For connection with press coupling.
Swivelling nut.

Valve DN	D	Pipe Ø	L*	EAN	Article No
15	G3/4	15	39	7318793810601	52 009-315

Swivelling nut.

Soldering connection

Swivelling nut.

Valve DN	D	Pipe Ø	L*	EAN	Article No
15	G3/4	15	13	7318792749308	52 009-515
15	G3/4	16	13	7318792749407	52 009-516

Soldering connection

Swivelling nut.

Soldering connection

Swivelling nut.

Valve DN	D	Pipe Ø	L*	EAN	Article No
15	G3/4	15	13	7318792749308	52 009-515
15	G3/4	16	13	7318792749407	52 009-516

Swivelling nut.

Welding connection

Swivelling nut.

Valve DN	D	Pipe DN	L*	EAN	Article No
15	G3/4	15	36	7318792748509	52 009-015

Welding connection

Swivelling nut.

Welding connection

Swivelling nut.

Valve DN	D	Pipe DN	L*	EAN	Article No
15	G3/4	15	36	7318792748509	52 009-015

Compression connection

Support bushes shall be used, for more information see catalogue leaflet FPL.

Should not be used with PEX pipes.

Chrome plated

Valve DN	D	Pipe Ø	L**	EAN	Article No
15	G3/4	15	27	7318793705006	53 319-615
15	G3/4	18	27	7318793705105	53 319-618
15	G3/4	22	27	7318793705204	53 319-622

*) Fitting length (from the gasket surface to the end of the connection).

**) Over all length L refers to unassembled coupling.

Compression connection

Support bushes shall be used, for more information see catalogue leaflet FPL.

Should not be used with PEX pipes.

Chrome plated

Valve DN	D	Pipe Ø	L**	EAN	Article No
15	G3/4	15	27	7318793705006	53 319-615
15	G3/4	18	27	7318793705105	53 319-618
15	G3/4	22	27	7318793705204	53 319-622

*) Fitting length (from the gasket surface to the end of the connection).

**) Over all length L refers to unassembled coupling.

Threads according to ISO 7-1. Swivelling nut.

With male thread

Threads according to ISO 7-1.
Swivelling nut.

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	R1/2	29	4024052516612	0601-02.350

With male thread

Threads according to ISO 7-1. Swivelling nut.

With male thread

Threads according to ISO 7-1.
Swivelling nut.

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	R1/2	29	4024052516612	0601-02.350

Threads according to ISO 228.

With female thread

Threads according to ISO 228.

Thread length according to ISO 7-1.

Swivelling nut.

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	G1/2	21	7318794016903	52 163-015

With female thread

Threads according to ISO 228.

With female thread

Threads according to ISO 228.

Thread length according to ISO 7-1.

Swivelling nut.

Valve DN	D	D1	L*	EAN	Article No
15	G3/4	G1/2	21	7318794016903	52 163-015

Connections – For eurocone

For euroconeNickel plated, soft sealing (EPDM), max. 95°C.

Compression fitting for copper or steel pipes

For eurocone
Nickel plated, soft sealing (EPDM), max. 95°C.

Ø Pipe	EAN	Article No
15	4024052515851	1313-15.351
18	4024052516056	1313-18.351

Compression fitting for copper or steel pipes

For euroconeNickel plated, soft sealing (EPDM), max. 95°C.

Compression fitting for copper or steel pipes

For eurocone
Nickel plated, soft sealing (EPDM), max. 95°C.

Ø Pipe	EAN	Article No
15	4024052515851	1313-15.351
18	4024052516056	1313-18.351

for copper or precision steel pipe with a 1 mm wall thickness. Brass.

Support sleeve

for copper or precision steel pipe with a 1 mm wall thickness.
Brass.

Ø Pipe	L	EAN	Article No
12	25,0	4024052127016	1300-12.170
15	26,0	4024052127917	1300-15.170
16	26,3	4024052128419	1300-16.170
18	26,8	4024052128815	1300-18.170

Support sleeve

for copper or precision steel pipe with a 1 mm wall thickness. Brass.

Support sleeve

for copper or precision steel pipe with a 1 mm wall thickness.
Brass.

Ø Pipe	L	EAN	Article No
12	25,0	4024052127016	1300-12.170
15	26,0	4024052127917	1300-15.170
16	26,3	4024052128419	1300-16.170
18	26,8	4024052128815	1300-18.170

For eurocone

Compression fitting for multi-layer pipes

For eurocone

Ø Pipe	EAN	Article No
16x2	4024052137312	1331-16.351

Compression fitting for multi-layer pipes

For eurocone

Compression fitting for multi-layer pipes

For eurocone

Ø Pipe	EAN	Article No
16x2	4024052137312	1331-16.351

For euroconeMetal-to-metal sealing

Compression fitting for copper or steel pipes

For eurocone
Metal-to-metal sealing

Support bushes shall be used.

Ø Pipe	EAN	Article No
12	4024052214211	3831-12.351
14	4024052214310	3831-14.351
15	4024052214617	3831-15.351
16	4024052214914	3831-16.351
18	4024052215218	3831-18.351

Compression fitting for copper or steel pipes

For euroconeMetal-to-metal sealing

Compression fitting for copper or steel pipes

For eurocone
Metal-to-metal sealing

Support bushes shall be used.

Ø Pipe	EAN	Article No
12	4024052214211	3831-12.351
14	4024052214310	3831-14.351
15	4024052214617	3831-15.351
16	4024052214914	3831-16.351
18	4024052215218	3831-18.351

For eurocone

Compression fitting for plastic pipes

For eurocone

Ø Pipe	EAN	Article No
12x1,1	4024052136018	1315-12.351
14x2	4024052134618	1311-14.351
16x1,5	4024052136117	1315-16.351
16x2	4024052134816	1311-16.351
17x2	4024052134915	1311-17.351
18x2	4024052135110	1311-18.351
20x2	4024052135318	1311-20.351

Compression fitting for plastic pipes

For eurocone

Compression fitting for plastic pipes

For eurocone

Ø Pipe	EAN	Article No
12x1,1	4024052136018	1315-12.351
14x2	4024052134618	1311-14.351
16x1,5	4024052136117	1315-16.351
16x2	4024052134816	1311-16.351
17x2	4024052134915	1311-17.351
18x2	4024052135110	1311-18.351
20x2	4024052135318	1311-20.351

Accessories

For heating and cooling.Max. temperature: 90°C.Shell thickness: 16 mm.Material: Cross-linked polyethylene foam, density external layer 80 kg/m3, internal layer 29 kg/m3.Fire class: B2 – DIN 4102 and 1 – UNI 9177.

Insulation

For heating and cooling.
Max. temperature: 90°C.
Shell thickness: 16 mm.
Material: Cross-linked polyethylene foam, density external layer 80 kg/m³, internal layer 29 kg/m³.
Fire class: B2 – DIN 4102 and 1 – UNI 9177.

Valve DN	L	H	W	EAN	Article No
15	125	125	90	5902276805714	322031-30405
15* / 20	120	140	100	5902276805721	322031-30508

*) Body marked with DN 20 (connections DN 15).

Insulation

For heating and cooling.Max. temperature: 90°C.Shell thickness: 16 mm.Material: Cross-linked polyethylene foam, density external layer 80 kg/m3, internal layer 29 kg/m3.Fire class: B2 – DIN 4102 and 1 – UNI 9177.