Features & Benefits

    Precise hydronic balancing

    Smoothly adjustable setting of max. flow prevents over flow through terminal unit.

    Installations without limits

    Slim and compact shape simplifies installation, one side access to all functions simplifies operation.

    Full control of the system

    Exact flow measuring and unique diagnostic functions for ultimate energy savings and highly reliable system.

    High reliability

    AMETAL® and stainless steel guarantees high corrosion resistance and reduces the risk of leakage.

    Technical description

    Application:

    Heating and cooling systems.

    Functions:

    Control
    Pre-setting (max. flow)
    Differential pressure control
    Measuring (ΔH, T, q)
    Isolation (for use during system maintenance – see also Leakage rate)

    Dimensions:

    DN 10-32

    Pressure class:

    PN 16

    Differential pressure (ΔpV):

    Max. differential pressure (ΔpVmax): 400 kPa = 4 bar
    Min. differential pressure (ΔpVmin):
    DN 10-20: 15 kPa = 0,15 bar
    DN 25-32: 23 kPa = 0,23 bar
    (Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software HySelect.)

    ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.

    ΔpVmin = The minimum recommended pressure drop over the valve, for proper differential pressure control.

    Flow range:

    The flow (qmax) can be set within the range:

    DN 10: 21,5 - 120 l/h
    DN 15 LF: 44 - 245 l/h
    DN 15: 88 - 470 l/h
    DN 20: 210 - 1150 l/h
    DN 25: 370 - 2150 l/h
    DN 32: 800 - 3700 l/h

    qmax = l/h at each setting and fully open valve plug.

    LF = Low flow

    Temperature:

    Max. working temperature: 90°C
    Min. working temperature: -10°C

    Media:

    Water or neutral fluids, water-glycol mixtures (0-57%).

    Lift:

    4 mm

    Leakage rate:

    Leakage flow ≤ 0,01% of max. qmax (setting 10) and correct flow direction. (Class IV according to EN 60534-4).

    Characteristics:

    Linear, best suited for on/off control.

    Material:

    Valve body: AMETAL®
    Valve insert: AMETAL®
    Valve plug: Brass CW724R (CuZn21Si3P)
    Spindle: Stainless steel
    Spindle seal: EPDM O-ring
    Δp insert: PPS
    Membrane: EPDM and HNBR
    Springs: Stainless steel
    O-rings: EPDM


    AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

    Marking:

    TA, IMI, PN 16, DN and flow direction arrow.
    Grey handwheel: TA-COMPACT-P and DN. For low flow version also LF.

    Connection:

    Male thread according to ISO 228.

    Connection to actuator:

    M30x1.5

    Actuators:

    See separate technical documentation on EMO T.

    Articles

    Threads according to ISO 228.

    Male thread

    Threads according to ISO 228.

    DN
    D
    L
    H1
    H2
    B
    qmax [l/h]
    Kg
    EAN
    Article No
    10
    G1/2
    74
    55
    55
    54
    120
    0,53
    7318794013308
    52 164-010
    15 LF
    G3/4
    74
    55
    55
    54
    245
    0,54
    7318794025202
    52 164-115
    15
    G3/4
    74
    55
    55
    54
    470
    0,54
    7318794013407
    52 164-015
    20
    G1
    85
    64
    55
    64
    1150
    0,69
    7318794013506
    52 164-020
    25
    G1 1/4
    93
    64
    61
    64
    2150
    0,79
    7318794013605
    52 164-025
    32
    G1 1/2
    112
    78
    61
    78
    3700
    1,5
    7318794013704
    52 164-032

    LF = Low flow

    *) Connection to actuator.

    → = Flow direction

    Connections

    For connection with press couplingSwivelling nut

    Connection with smooth end

    For connection with press coupling
    Swivelling nut

    Valve DN
    D
    Pipe Ø
    L*
    EAN
    Article No
    10
    G1/2
    12
    35
    7318793810502
    52 009-312
    15
    G3/4
    15
    39
    7318793810601
    52 009-315
    20
    G1
    18
    44
    7318793810700
    52 009-318
    20
    G1
    22
    48
    7318793810809
    52 009-322
    25
    G1 1/4
    28
    53
    7318793810908
    52 009-328
    32
    G1 1/2
    35
    59
    7318793811004
    52 009-335

    *) Fitting length (from the gasket surface to the end of the connection).

    Compression connection

    Support bushes shall be used, for more information see catalogue leaflet FPL.

    Should not be used with PEX pipes.

    Chrome plated

    Valve DN
    D
    Pipe Ø
    L**
    EAN
    Article No
    10
    G1/2
    8
    16
    7318793620002
    53 319-208
    10
    G1/2
    10
    17
    7318793620101
    53 319-210
    10
    G1/2
    12
    17
    7318793620200
    53 319-212
    10
    G1/2
    15
    20
    7318793620309
    53 319-215
    10
    G1/2
    16
    25
    7318793620408
    53 319-216
    15
    G3/4
    15
    27
    7318793705006
    53 319-615
    15
    G3/4
    18
    27
    7318793705105
    53 319-618
    15
    G3/4
    22
    27
    7318793705204
    53 319-622

    **) Over all length L refers to unassembled coupling.

    Threads according to ISO 7-1.Swivelling nut

    With male thread

    Threads according to ISO 7-1.
    Swivelling nut

    Valve DN
    D
    D1
    L*
    EAN
    Article No
    10
    -
    -
    -
    -
    -
    15
    G3/4
    R1/2
    29
    4024052516612
    0601-02.350
    20
    G1
    R3/4
    32,5
    4024052516810
    0601-03.350
    25
    G1 1/4
    R1
    35
    4024052517015
    0601-04.350
    32
    G1 1/2
    R1 1/4
    38,5
    4024052517213
    0601-05.350

    *) Fitting length (from the gasket surface to the end of the connection).

    Threads according to ISO 228.

    With female thread

    Threads according to ISO 228.

    Thread length according to ISO 7-1.

    Swivelling nut

    Valve DN
    D
    D1
    L*
    EAN
    Article No
    10
    G1/2
    G3/8
    21
    7318794016804
    52 163-010
    15
    G3/4
    G1/2
    21
    7318794016903
    52 163-015
    20
    G1
    G3/4
    23
    7318794017009
    52 163-020
    25
    G1 1/4
    G1
    23
    7318794017108
    52 163-025
    32
    G1 1/2
    G1 1/4
    31
    7318794017207
    52 163-032

    *) Fitting length (from the gasket surface to the end of the connection).

    Swivelling nut

    Soldering connection

    Swivelling nut

    Valve DN
    D
    Pipe Ø
    L*
    EAN
    Article No
    10
    G1/2
    10
    10
    7318792749100
    52 009-510
    10
    G1/2
    12
    11
    7318792749209
    52 009-512
    15
    G3/4
    15
    13
    7318792749308
    52 009-515
    15
    G3/4
    16
    13
    7318792749407
    52 009-516
    20
    G1
    18
    15
    7318792749506
    52 009-518
    20
    G1
    22
    18
    7318792749605
    52 009-522
    25
    G1 1/4
    28
    21
    7318792749704
    52 009-528
    32
    G1 1/2
    35
    26
    7318792749803
    52 009-535

    *) Fitting length (from the gasket surface to the end of the connection).

    Swivelling nut

    Welding connection

    Swivelling nut

    Valve DN
    D
    Pipe DN
    L*
    EAN
    Article No
    10
    G1/2
    10
    30
    7318792748400
    52 009-010
    15
    G3/4
    15
    36
    7318792748509
    52 009-015
    20
    G1
    20
    40
    7318792748608
    52 009-020
    25
    G1 1/4
    25
    40
    7318792748707
    52 009-025
    32
    G1 1/2
    32
    40
    7318792748806
    52 009-032

    *) Fitting length (from the gasket surface to the end of the connection).

    Accessories

    Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

    Tamper proof cover

    Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
    Prevents manipulation of setting.

    EAN
    Article No
    7318794030206
    52 164-100

    For heating/comfort cooling.Material: EPP.Fire class: E (EN 13501-1), B2 (DIN 4102).

    Insulation

    For heating/comfort cooling.
    Material: EPP.
    Fire class: E (EN 13501-1), B2 (DIN 4102).

    Valve DN
    L
    H1
    H2
    D
    EAN
    Article No
    10-15
    100
    61
    71
    84
    7318794027404
    52 164-901
    20
    118
    67
    79
    90
    7318794027503
    52 164-902
    25
    127
    71
    84
    104
    7318794027602
    52 164-903
    32
    154
    85
    99
    124
    7318794027701
    52 164-904

    For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

    Grip for setting wheel, optional

    For better grip when presetting.
    For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

    Colour
    EAN
    Article No
    Orange
    7318794040502
    52 164-950

    Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

    Spindle extension

    Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
    M30x1,5.

    L
    EAN
    Article No
    Plastic, black
    30
    4024052165018
    2002-30.700

    For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

    Protection cap

    For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

    EAN
    Article No
    Red
    7318793961105
    52 143-100

    52164010

    Select a format Download

    52164950

    Select a format Download

    TA-COMPACT-P_persp_kat

    Select a format Download

    52164020

    Select a format Download

    52164901-904_persp

    Select a format Download

    220120700

    Select a format Download

    TA-COMPACT-P

    Select a format Download

    52163015

    Select a format Download

    060102350

    Select a format Download

    52164032

    Select a format Download

    52164901-904

    Select a format Download

    52164025

    Select a format Download

    TA-COMPACT-P_persp_kat_w_path

    Select a format Download

    52164015

    Select a format Download

    52164115

    Select a format Download

    52164100

    Select a format Download

    2D3D

    Drawings