Features & Benefits

    Precise hydronic balancing

    Smoothly adjustable setting of max. flow prevents over flow through terminal unit.

    Installations without limits

    Slim and compact shape simplifies installation, one side access to all functions simplifies operation.

    Full control of the system

    Exact flow measuring and unique diagnostic functions for ultimate energy savings and highly reliable system.

    High reliability

    AMETAL® and stainless steel guarantees high corrosion resistance and reduces the risk of leakage.

    Technical description

    Application:

    Heating and cooling systems.

    Functions:

    Control
    Pre-setting (max. flow)
    Differential pressure control
    Measuring (ΔH, T, q)
    Isolation (for use during system maintenance – see also Leakage rate)

    Dimensions:

    DN 10-32

    Pressure class:

    PN 16

    Differential pressure (ΔpV):

    Max. differential pressure (ΔpVmax): 400 kPa = 4 bar
    Min. differential pressure (ΔpVmin):
    DN 10-20: 15 kPa = 0,15 bar
    DN 25-32: 23 kPa = 0,23 bar
    (Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software HySelect.)

    ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.

    ΔpVmin = The minimum recommended pressure drop over the valve, for proper differential pressure control.

    Flow range:

    The flow (qmax) can be set within the range:

    DN 10: 21,5 - 120 l/h
    DN 15 LF: 44 - 245 l/h
    DN 15: 88 - 470 l/h
    DN 20: 210 - 1150 l/h
    DN 25: 370 - 2150 l/h
    DN 32: 800 - 3700 l/h

    qmax = l/h at each setting and fully open valve plug.

    LF = Low flow

    Temperature:

    Max. working temperature: 90°C
    Min. working temperature: -10°C

    Media:

    Water or neutral fluids, water-glycol mixtures (0-57%).

    Lift:

    4 mm

    Leakage rate:

    Leakage flow ≤ 0,01% of max. qmax (setting 10) and correct flow direction. (Class IV according to EN 60534-4).

    Material:

    Valve body: AMETAL®
    Valve insert: AMETAL®
    Valve plug: Brass CW724R (CuZn21Si3P)
    Spindle: Stainless steel
    Spindle seal: EPDM O-ring
    Δp insert: PPS
    Membrane: EPDM and HNBR
    Springs: Stainless steel
    O-rings: EPDM


    AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

    Marking:

    TA, IMI, PN 16, DN and flow direction arrow.
    Grey handwheel: TA-COMPACT-P and DN. For low flow version also LF.

    Connection:

    Male thread according to ISO 228.

    Connections (accessories) with female and male threads NPT according to ANSI/ASME B1.20.1-1983, or for soldering according to ASME/ANSI B16.18.

    Connection to actuator:

    M30x1.5

    Actuators:

    See separate technical documentation on EMO T.

    Articles

    Threads according to ISO 228.

    Male thread

    Threads according to ISO 228.

    DN
    D
    L
    H1
    H2
    B
    qmax [l/h]
    Kg
    EAN
    Article No
    10
    G1/2
    74
    55
    55
    54
    120
    0,53
    7318794013308
    52 164-010
    15 LF
    G3/4
    74
    55
    55
    54
    245
    0,54
    7318794025202
    52 164-115
    15
    G3/4
    74
    55
    55
    54
    470
    0,54
    7318794013407
    52 164-015
    20
    G1
    85
    64
    55
    64
    1150
    0,69
    7318794013506
    52 164-020
    25
    G1 1/4
    93
    64
    61
    64
    2150
    0,79
    7318794013605
    52 164-025
    32
    G1 1/2
    112
    78
    61
    78
    3700
    1,5
    7318794013704
    52 164-032

    LF = Low flow

    *) Connection to actuator.

    → = Flow direction

    Connections

    According to ASME/ANSI B16.18Swivelling nut

    Soldering connection

    According to ASME/ANSI B16.18
    Swivelling nut

    Valve DN
    D
    Pipe Ø [in]
    ~ [mm]
    L*
    EAN
    Article No
    10
    G1/2
    0.504
    12.8
    13
    7318794022805
    52 009-710
    15
    G3/4
    0.629
    16.0
    16
    7318794022904
    52 009-715
    20
    G3/4
    0.879
    22
    22
    7318794023000
    52 009-720
    25
    G1 1/4
    1.130
    29
    26
    7318794023109
    52 009-725
    32
    G1 1/2
    1.380
    35
    28
    7318794023208
    52 009-732

    *) Fitting length (from the gasket surface to the end of the connection).


    Other type of connections (ISO), see international version of TA-COMPACT-P.

    Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

    With male thread NPT

    Threads according to ANSI/ASME B1.20.1-1983.
    Swivelling nut

    Valve DN
    D
    D1
    L*
    EAN
    Article No
    10
    -
    -
    -
    -
    -
    15
    G3/4
    1/2 NPT
    29
    4024052928415
    2400-02.350
    20
    G1
    3/4 NPT
    32,5
    4024052928514
    2400-03.350
    25
    G1 1/4
    1 NPT
    35
    4024052928613
    2400-04.350
    32
    -
    -
    -
    -
    -

    *) Fitting length (from the gasket surface to the end of the connection).


    Other type of connections (ISO), see international version of TA-COMPACT-P.

    Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

    With female thread NPT

    Threads according to ANSI/ASME B1.20.1-1983.
    Swivelling nut

    Valve DN
    D
    D1
    L*
    EAN
    Article No
    10
    G1/2
    3/8 NPT
    21
    7318794017801
    52 163-210
    15
    G3/4
    1/2 NPT
    25
    7318794017900
    52 163-215
    20
    G1
    1/2 NPT
    18
    7318794018303
    52 163-320
    20
    G1
    3/4 NPT
    23
    7318794018006
    52 163-220
    25
    G1 1/4
    3/4 NPT
    27
    7318794018402
    52 163-325
    25
    G1 1/4
    1 NPT
    27
    7318794018105
    52 163-225
    32
    G1 1/2
    1 NPT
    27
    7318794018501
    52 163-332
    32
    G1 1/2
    1 1/4 NPT
    31
    7318794018204
    52 163-232

    *) Fitting length (from the gasket surface to the end of the connection).


    Other type of connections (ISO), see international version of TA-COMPACT-P.

    Accessories

    For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

    Protection cap

    For TA-COMPACT-P/-DP, TA-Modulator (DN 15-20), TBV-C/-CM.

    EAN
    Article No
    Red
    7318793961105
    52 143-100

    Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

    Tamper proof cover

    Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
    Prevents manipulation of setting.

    EAN
    Article No
    7318794030206
    52 164-100

    Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

    Spindle extension

    Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
    M30x1,5.

    L
    EAN
    Article No
    Plastic, black
    30
    4024052165018
    2002-30.700

    For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

    Grip for setting wheel, optional

    For better grip when presetting.
    For TA-COMPACT-P/-DP and TA-Modulator (DN 15-32).

    Colour
    EAN
    Article No
    Orange
    7318794040502
    52 164-950

    For heating/comfort cooling.Material: EPP.Fire class: E (EN 13501-1), B2 (DIN 4102).

    Insulation

    For heating/comfort cooling.
    Material: EPP.
    Fire class: E (EN 13501-1), B2 (DIN 4102).

    Valve DN
    L
    H1
    H2
    D
    EAN
    Article No
    10-15
    100
    61
    71
    84
    7318794027404
    52 164-901
    20
    118
    67
    79
    90
    7318794027503
    52 164-902
    25
    127
    71
    84
    104
    7318794027602
    52 164-903
    32
    154
    85
    99
    124
    7318794027701
    52 164-904