TA-COMPACT-P – NPT threads

Pressure independent balancing and control valve (PIBCV)

The pressure independent balancing and control valve TA-COMPACT-P ensures optimum performance over a long life. Adjustable maximum flow enables design flow and eliminates over flows for accurate hydronic control. The TA-COMPACT-P together with our balancing instruments enables advanced measuring and diagnostics.

Features & Benefits

Precise hydronic balancing

Smoothly adjustable setting of max. flow prevents over flow through terminal unit.

Installations without limits

Slim and compact shape simplifies installation, one side access to all functions simplifies operation.

Full control of the system

Exact flow measuring and unique diagnostic functions for ultimate energy savings and highly reliable system.

High reliability

AMETAL^® and stainless steel guarantees high corrosion resistance and reduces the risk of leakage.

Technical Information

Technical description

Application:

Heating and cooling systems.

Functions:

Control
Pre-setting (max. flow)
Differential pressure control
Measuring (ΔH, T, q)
Isolation (for use during system maintenance – see also Leakage rate)

Dimensions:

DN 10-32

Pressure class:

PN 16

Differential pressure (ΔpV):

Max. differential pressure (ΔpVmax): 400 kPa = 4 bar
Min. differential pressure (ΔpVmin):
DN 10-20: 15 kPa = 0,15 bar
DN 25-32: 23 kPa = 0,23 bar
(Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software HySelect.)

ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.

ΔpVmin = The minimum recommended pressure drop over the valve, for proper differential pressure control.

Flow range:

The flow (qmax) can be set within the range:

DN 10: 21,5 - 120 l/h
DN 15 LF: 44 - 245 l/h
DN 15: 88 - 470 l/h
DN 20: 210 - 1150 l/h
DN 25: 370 - 2150 l/h
DN 32: 800 - 3700 l/h

qmax = l/h at each setting and fully open valve plug.

LF = Low flow

Temperature:

Max. working temperature: 90°C
Min. working temperature: -10°C

Media:

Water or neutral fluids, water-glycol mixtures (0-57%).

Lift:

4 mm

Leakage rate:

Leakage flow ≤ 0,01% of max. qmax (setting 10) and correct flow direction. (Class IV according to EN 60534-4).

Characteristics:

Linear, best suited for on/off control.

Material:

Valve body: AMETAL®
Valve insert: AMETAL®
Valve plug: Brass CW724R (CuZn21Si3P)
Spindle: Stainless steel
Spindle seal: EPDM O-ring
Δp insert: PPS
Membrane: EPDM and HNBR
Springs: Stainless steel
O-rings: EPDM

AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

Marking:

TA, IMI, PN 16, DN and flow direction arrow.
Grey handwheel: TA-COMPACT-P and DN. For low flow version also LF.

Connection:

External threads according to ISO 228.

Connections (accessories) with female and male threads NPT according to ANSI/ASME B1.20.1-1983, or for soldering according to ASME/ANSI B16.18.

Connection to actuator:

M30x1.5

Actuators:

See separate technical documentation on EMO T and TA-TRI.

Articles

Threads according to ISO 228.

Male thread

Threads according to ISO 228.

DN	d	L	H1	H2	W	q_max [l/h]	Kg	EAN	Article No
10	G1/2	74	55	55	54	120	0,53	7318794013308	52 164-010
15 LF	G3/4	74	55	55	54	245	0,54	7318794025202	52 164-115
15	G3/4	74	55	55	54	470	0,54	7318794013407	52 164-015
20	G1	85	64	55	64	1150	0,69	7318794013506	52 164-020
25	G1 1/4	93	64	61	64	2150	0,79	7318794013605	52 164-025
32	G1 1/2	112	78	61	78	3700	1,5	7318794013704	52 164-032

LF = Low flow

*) Connection to actuator.

→ = Flow direction

Male thread

Threads according to ISO 228.

Male thread

Threads according to ISO 228.

DN	d	L	H1	H2	W	q_max [l/h]	Kg	EAN	Article No
10	G1/2	74	55	55	54	120	0,53	7318794013308	52 164-010
15 LF	G3/4	74	55	55	54	245	0,54	7318794025202	52 164-115
15	G3/4	74	55	55	54	470	0,54	7318794013407	52 164-015
20	G1	85	64	55	64	1150	0,69	7318794013506	52 164-020
25	G1 1/4	93	64	61	64	2150	0,79	7318794013605	52 164-025
32	G1 1/2	112	78	61	78	3700	1,5	7318794013704	52 164-032

LF = Low flow

*) Connection to actuator.

→ = Flow direction

Connections

According to ASME/ANSI B16.18Swivelling nut

Soldering connection

According to ASME/ANSI B16.18
Swivelling nut

Valve DN	D	Pipe Ø [in]	~ [mm]	L*	EAN	Article No
10	G1/2	0.504	12.8	13	7318794022805	52 009-710
15	G3/4	0.629	16.0	16	7318794022904	52 009-715
20	G1	0.879	22	22	7318794023000	52 009-720
25	G1 1/4	1.130	29	26	7318794023109	52 009-725
32	G1 1/2	1.380	35	28	7318794023208	52 009-732

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-COMPACT-P.

Soldering connection

According to ASME/ANSI B16.18Swivelling nut

Soldering connection

According to ASME/ANSI B16.18
Swivelling nut

Valve DN	D	Pipe Ø [in]	~ [mm]	L*	EAN	Article No
10	G1/2	0.504	12.8	13	7318794022805	52 009-710
15	G3/4	0.629	16.0	16	7318794022904	52 009-715
20	G1	0.879	22	22	7318794023000	52 009-720
25	G1 1/4	1.130	29	26	7318794023109	52 009-725
32	G1 1/2	1.380	35	28	7318794023208	52 009-732

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-COMPACT-P.

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With external thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Valve DN	D	D1	L*	EAN	Article No
10	-	-	-	-	-
15	G3/4	1/2 NPT	29	4024052928415	2400-02.350
20	G1	3/4 NPT	32,5	4024052928514	2400-03.350
25	G1 1/4	1 NPT	35	4024052928613	2400-04.350
32	-	-	-	-	-

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-COMPACT-P.

With external thread NPT

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With external thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Valve DN	D	D1	L*	EAN	Article No
10	-	-	-	-	-
15	G3/4	1/2 NPT	29	4024052928415	2400-02.350
20	G1	3/4 NPT	32,5	4024052928514	2400-03.350
25	G1 1/4	1 NPT	35	4024052928613	2400-04.350
32	-	-	-	-	-

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-COMPACT-P.

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With internal thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Valve DN	D	D1	L*	EAN	Article No
10	G1/2	3/8 NPT	21	7318794017801	52 163-210
15	G3/4	1/2 NPT	25	7318794017900	52 163-215
20	G1	1/2 NPT	18	7318794018303	52 163-320
20	G1	3/4 NPT	23	7318794018006	52 163-220
25	G1 1/4	3/4 NPT	27	7318794018402	52 163-325
25	G1 1/4	1 NPT	27	7318794018105	52 163-225
32	G1 1/2	1 NPT	27	7318794018501	52 163-332
32	G1 1/2	1 1/4 NPT	31	7318794018204	52 163-232

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-COMPACT-P.

With internal thread NPT

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With internal thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Valve DN	D	D1	L*	EAN	Article No
10	G1/2	3/8 NPT	21	7318794017801	52 163-210
15	G3/4	1/2 NPT	25	7318794017900	52 163-215
20	G1	1/2 NPT	18	7318794018303	52 163-320
20	G1	3/4 NPT	23	7318794018006	52 163-220
25	G1 1/4	3/4 NPT	27	7318794018402	52 163-325
25	G1 1/4	1 NPT	27	7318794018105	52 163-225
32	G1 1/2	1 NPT	27	7318794018501	52 163-332
32	G1 1/2	1 1/4 NPT	31	7318794018204	52 163-232

*) Fitting length (from the gasket surface to the end of the connection).

Other type of connections (ISO), see international version of TA-COMPACT-P.

Accessories

For TA-COMPACT-P/-DP, TA-Modulator (DN 10-20), TBV-C/-CM.

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (DN 10-20), TBV-C/-CM.

Colour	EAN	Article No
Red	7318793961105	52 143-100

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (DN 10-20), TBV-C/-CM.

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (DN 10-20), TBV-C/-CM.

Colour	EAN	Article No
Red	7318793961105	52 143-100

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
Prevents manipulation of setting.

EAN	Article No
7318794030206	52 164-100

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
Prevents manipulation of setting.

EAN	Article No
7318794030206	52 164-100

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

Spindle extension

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
M30x1,5.

Type	L	EAN	Article No
Plastic, black	30	4024052165018	2002-30.700

Spindle extension

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

Spindle extension

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
M30x1,5.

Type	L	EAN	Article No
Plastic, black	30	4024052165018	2002-30.700

For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 10-32).

Grip for setting wheel, optional

For better grip when presetting.
For TA-COMPACT-P/-DP and TA-Modulator (DN 10-32).

Colour	EAN	Article No
Orange	7318794040502	52 164-950

Grip for setting wheel, optional

For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (DN 10-32).

Grip for setting wheel, optional

For better grip when presetting.
For TA-COMPACT-P/-DP and TA-Modulator (DN 10-32).

Colour	EAN	Article No
Orange	7318794040502	52 164-950

For heating/comfort cooling.Material: EPP.Fire class: E (EN 13501-1), B2 (DIN 4102).

Insulation

For heating/comfort cooling.
Material: EPP.
Fire class: E (EN 13501-1), B2 (DIN 4102).

Valve DN	L	H1	H2	D	EAN	Article No
10-15	100	61	71	84	7318794027404	52 164-901
20	118	67	79	90	7318794027503	52 164-902
25	127	71	84	104	7318794027602	52 164-903
32	154	85	99	124	7318794027701	52 164-904

Insulation

For heating/comfort cooling.Material: EPP.Fire class: E (EN 13501-1), B2 (DIN 4102).

Insulation

For heating/comfort cooling.
Material: EPP.
Fire class: E (EN 13501-1), B2 (DIN 4102).

Valve DN	L	H1	H2	D	EAN	Article No
10-15	100	61	71	84	7318794027404	52 164-901
20	118	67	79	90	7318794027503	52 164-902
25	127	71	84	104	7318794027602	52 164-903
32	154	85	99	124	7318794027701	52 164-904