Features & Benefits

Precise hydronic balancing

Smoothly adjustable setting of max. flow prevents over flow through terminal unit.

Installations without limits

Slim and compact shape simplifies installation, one side access to all functions simplifies operation.

Full control of the system

Exact flow measuring and unique diagnostic functions for ultimate energy savings and highly reliable system.

High reliability

AMETAL® and stainless steel guarantees high corrosion resistance and reduces the risk of leakage.

Technical description

Application:

Heating (not steam) and cooling systems.

Functions:

Control
Pre-setting (max. flow)
Differential pressure control
Measuring (ΔH, T, q)
Isolation (for use during system maintenance – see also Leakage rate)

Dimensions:

3/8" – 1 1/4"

Pressure class:

PN 16 (230 psi)

Differential pressure (ΔpV):

Max. differential pressure (ΔpVmax): 58 psi
Min. differential pressure (ΔpVmin):
Size 3/8" - 3/4": 2.2 psi
Size 1" - 1 1/4": 3.3 psi
(Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software HySelect.)

ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.

ΔpVmin = The minimum recommended pressure drop over the valve, for proper differential pressure control.

Flow range:

The flow (qmax) can be set within the range:

3/8": 0.095 - 0.53 gpm
1/2" LF: 0.19 - 1.08 gpm
1/2": 0.39 - 2.07 gpm
3/4": 0.92 - 5.06 gpm
1": 1.63 - 9.46 gpm
1 1/4": 3.52 - 16.3 gpm

qmax = gpm at each setting and fully open valve plug.

LF = Low flow

Temperature:

Max. working temperature: 194°F
Min. working temperature: 14°F

Media:

Water or neutral fluids, water-glycol mixtures (0-57%).

Lift:

0.157 in

Leakage rate:

Leakage flow ≤ 0,01% of max. qmax (setting 10) and correct flow direction. (Class IV according to EN 60534-4).

Characteristics:

Linear, best suited for on/off control.

Material:

Valve body: AMETAL®
Valve insert: AMETAL®
Valve plug: Brass CW724R (CuZn21Si3P)
Spindle: Stainless steel
Spindle seal: EPDM O-ring
Δp insert: PPS
Membrane: EPDM and HNBR
Springs: Stainless steel
O-rings: EPDM


AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

Marking:

TA, IMI, PN 16, DN and flow direction arrow.
Grey handwheel: TA-COMPACT-P and DN. For low flow version also LF.

Connection:

External threads according to ISO 228.

Connections (accessories) with female and male thread NPT according to ANSI/ASME B1.20.1-1983, or for soldering according to ASME/ANSI B16.18.

Connection to actuator:

M30x1.5

Actuators:

See separate information on EMO T and TA-TRI.

Articles

Threads according to ISO 228.

Male thread

Threads according to ISO 228.

Size
(DN)
d
L [in]
H1 [in]
H2 [in]
W [in]
qmax [gpm]
lb
EAN
Article No
3/8"
10
G1/2
2.91
2.17
2.17
2.13
0.53
1.17
7318794013308
52 164-010
1/2" LF
15
G3/4
2.91
2.17
2.17
2.13
1.08
1.19
7318794025202
52 164-115
1/2"
15
G3/4
2.91
2.17
2.17
2.13
2.07
1.19
7318794013407
52 164-015
3/4"
20
G1
3.35
2.52
2.17
2.52
5.06
1.52
7318794013506
52 164-020
1"
25
G1 1/4
3.66
2.52
2.40
2.52
9.46
1.74
7318794013605
52 164-025
1 1/4"
32
G1 1/2
4.41
3.07
2.40
3.07
16.3
3.31
7318794013704
52 164-032

LF = Low flow

*) Connection to actuator.

→ = Flow direction

Connections

According to ASME/ANSI B16.18Swivelling nut

Soldering connection

According to ASME/ANSI B16.18
Swivelling nut

Valve size
D
Pipe Ø [in]
L [in] *
EAN
Article No
3/8"
G1/2
0.504
0.51
7318794022805
52 009-710
1/2"
G3/4
0.629
0.63
7318794022904
52 009-715
3/4"
G1
0.879
0.87
7318794023000
52 009-720
1"
G1 1/4
1.130
1.02
7318794023109
52 009-725
1 1/4"
G1 1/2
1.380
1.10
7318794023208
52 009-732

*) Fitting length (from the gasket surface to the end of the connection).


Other type of connections (ISO), see international version of TA-COMPACT-P.

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With external thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Valve size
D
D1
L [in] *
EAN
Article No
3/8"
-
-
-
-
-
1/2"
G3/4
1/2 NPT
1.14
4024052928415
2400-02.350
3/4"
G1
3/4 NPT
1.28
4024052928514
2400-03.350
1"
G1 1/4
1 NPT
1.38
4024052928613
2400-04.350
1 1/4"
-
-
-
-
-

*) Fitting length (from the gasket surface to the end of the connection).


Other type of connections (ISO), see international version of TA-COMPACT-P.

Threads according to ANSI/ASME B1.20.1-1983.Swivelling nut

With internal thread NPT

Threads according to ANSI/ASME B1.20.1-1983.
Swivelling nut

Valve size
D
D1
L [in] *
EAN
Article No
3/8"
G1/2
3/8 NPT
0.83
7318794017801
52 163-210
1/2"
G3/4
1/2 NPT
0.98
7318794017900
52 163-215
3/4"
G1
1/2 NPT
0.71
7318794018303
52 163-320
3/4"
G1
3/4 NPT
0.91
7318794018006
52 163-220
1"
G1 1/4
3/4 NPT
1.06
7318794018402
52 163-325
1"
G1 1/4
1 NPT
1.06
7318794018105
52 163-225
1 1/4"
G1 1/2
1 NPT
1.06
7318794018501
52 163-332
1 1/4"
G1 1/2
1 1/4 NPT
1.22
7318794018204
52 163-232

*) Fitting length (from the gasket surface to the end of the connection).


Other type of connections (ISO), see international version of TA-COMPACT-P.

Accessories

For TA-COMPACT-P/-DP, TA-Modulator (3/8"-3/4"), TBV-C/-CM.

Protection cap

For TA-COMPACT-P/-DP, TA-Modulator (3/8"-3/4"), TBV-C/-CM.

Color
EAN
Article No
Red
7318793961105
52 143-100

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator. Prevents manipulation of setting.

Tamper proof cover

Set containing plastic cover and locking ring for valves with connection M30x1.5 to thermostatic head/actuator.
Prevents manipulation of setting.

EAN
Article No
7318794030206
52 164-100

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.M30x1,5.

Spindle extension

Recommended together with the insulation to minimize the risk of condensation at the valve-actuator interface.
M30x1,5.

Type
L [in]
EAN
Article No
Plastic, black
1.18
4024052165018
2002-30.700

For better grip when presetting.For TA-COMPACT-P/-DP and TA-Modulator (3/8" - 1 1/4").

Grip for setting wheel, optional

For better grip when presetting.
For TA-COMPACT-P/-DP and TA-Modulator (3/8" - 1 1/4").

Color
EAN
Article No
Orange
7318794040502
52 164-950

For heating/comfort cooling.Material: EPP.Fire class: E (EN 13501-1), B2 (DIN 4102).

Insulation

For heating/comfort cooling.
Material: EPP.
Fire class: E (EN 13501-1), B2 (DIN 4102).

Valve size
L [in]
H1 [in]
H2 [in]
D [in]
EAN
Article No
3/8"-1/2"
3.94
2.40
2.79
3.31
7318794027404
52 164-901
3/4"
4.65
2.64
3.11
3.54
7318794027503
52 164-902
1"
5.00
2.79
3.31
4.09
7318794027602
52 164-903
1 1/4"
6.06
3.35
3.90
4.88
7318794027701
52 164-904

52164950

Select a format Download

52164901-904

Select a format Download

520093xx

Select a format Download

TA-COMPACT-P_persp_kat_w_path

Select a format Download

53319xxx

Select a format Download

220120700

Select a format Download

52164020

Select a format Download

TA-COMPACT-P

Select a format Download

52164025

Select a format Download

060102350

Select a format Download

52164010

Select a format Download

52163015

Select a format Download

52164015

Select a format Download

520090xx

Select a format Download

52164100

Select a format Download

52164115

Select a format Download

52143100

Select a format Download

52164901-904_persp

Select a format Download

52009515

Select a format Download

TA-COMPACT-P_persp_kat

Select a format Download

52164032

Select a format Download

Technical specifications

Related Products

Installation instructions

Legal documents

Marketing material

Drawings

2D3D

Related Products

EMO T

Used in conjunction with small terminal valves e.g. TBV-C and TA-COMPACT-P or thermostatic valve...

IMI Pneumatex

TA-SCOPE

TA-SCOPE is a tough, effective balancing instrument for measuring and documenting of differential...

IMI Pneumatex