Installer for TA-Scope and DpS-Visio

If you’re having problems automatically installing the TA-SCOPE or DpS-Visio DFU USB driver on your PC, we have a solution! 

Download

Standalone USB drivers

Standalone USB driver for TA-SCOPE installation

The USB driver for TA-SCOPE should automatically install itself the first time you connect to a PC with the dedicated USB cable. However, on occasion the installation can fail due to individual PC configurations. If you experience this issue, simply download the separate USB driver installer from the link below. Once the driver is installed, your PC should autom​atically communicate with the TA-SCOPE.

You can download the installer from the link below. You will be asked to provide registration details before the download commences.​

Standalone USB driver for DpS-Visio installation

To update DpS-Visio firmware with the HySelect software, we use a dedicated USB mode called DFU (Device Firmware Update). The USB DFU driver for DpS-Visio should automatically install itself the first time you connect to a PC and start the update procedure with HySelect. However, on occasion the installation can fail due to individual PC configurations. If you experience this issue, simply download the separate USB DFU driver installer from the link below. Once the driver is installed, your PC should automatically communicate with the DpS-Visio.

You can download the installer from the link below. Choose the good version in regards to your actual PC configuration. You will be asked to provide registration details before the download commences.